Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com         Ordering/Questionsp

Deck Mount Chainplates


Deck Mount Chainplates
These Chainplates are designed to be bolted directly to a flat Deck. Generally used for Shroud attachment on smaller boats, but sometimes used in Forestay and Backstay applications, they are suitable for larger boats and in other applications where the Deck is sufficiently reinforced.

Deck Mount Chainplates are listed below by the size of the Pin(s) they are attached to the rigging with. If you require Deck Mounted Chainplates not listed here, we stock some others and are able to fabricate a variety of Custom ones, please forward a sketch with complete measurements and details for a quote.
See also, (thru-Deck Mounted) U-Bolt Type Chainplates.
 


Deck Mount Chainplates for 3/16" Pins
Deck Mount Chainplate with 3/16" Pin: K-299:

Stainless Steel Deck Mount Chainplate with 3/16" Pin for attachment of Shroud. Formed SS Channel is attached to Deck with (2) 1/4" bolts on 1 5/8" centers. Unit is (maximum) 2" long x 5/8" wide x 3/4" high, Pin hole is 1/2" above deck.

 

Deck Mount Chainplate with 3/16" Key Pin: K-1102:

Stainless Steel Deck Mount Chainplate with Captive 3/16" Pin for attachment of Shroud. Captive spring-loaded Key Pin for quick release applications. Note that items attached to Key Pin require a (minimum) 1/4" hole. Formed SS Channel is attached to boat with (2) 1/4" bolts on 1 5/8" centers. Unit is (maximum) 2" long x 5/8" wide (excluding pin) x 3/4" high, Pin hole is 1/2" above deck.

 


Deck Mount Chainplates for 1/4" Pins
Deck Mount Chainplate for 1/4" Pin: K-389HCP:

Stainless Steel Deck Mount Chainplate with 1/4" hole for attachment of Shroud. Welded SS Chainplate is attached to Deck with (2) 1/4" bolts on 1 1/4" centers. Unit is (maximum) 2" long x 1" wide x .100" thick, Pin hole is 1" above deck. Special replacement unit is 10% thicker than original as used on Boston Whaler Harpoon 4.6. CP 84-104T

 

Deck Mount Chainplate for 1/4" Pin: CP 84-C184B-B:

Cast Bronze Deck Mount Chainplate with 1/4" hole for attachment of Forestay or Backstay. Heavy-duty unit is attached to Deck with (4) 1/4" FH screws on 15/16" (forward) and 1 5/8" (aft) centers. Trapezoidal unit is (maximum) 2 1/4" long x 2 5/8" wide x 1 1/4" high, and 1/4" thick at the Pin hole. Pin hole is 3/4" above deck. As used on Cape Dory Typhoon for Backstay attachment.

 

Double Deck Mount Chainplate for (2) 1/4" Pins: CP 84-C183B-44:
Cast Bronze Deck Mount Chainplate with (2) 1/4" holes for attachment of Shrouds. Heavy-duty unit is attached to Deck with (2) 3/8" FH screws on 1 5/16" centers. Unit is (maximum) 2 3/8" long x 1 15/16" wide x 1 1/2" high, and 5/16" thick at the Pin holes. Pin holes are 1" above deck, and 13/16" apart.


 

 


Deck Mount Chainplates for 5/16" Pins
Deck Mount Chainplate for 5/16" Pin: CP 84-C182B:

Cast Bronze Deck Mount Chainplate with 5/16" hole for attachment of Shroud. Heavy-duty unit is attached to Deck with (2) 3/8" FH screws on 1 3/8" centers. Unit is 2 1/2" long x 1 3/4" wide x (maximum) 1 3/4" high, and 5/16" thick at the Pin hole. Pin hole is 1 1/8" above deck.

 

Double Deck Mount Chainplate for (2) 5/16" Pins: CP 84-C186B-55:
Cast Bronze Deck Mount Chainplate with (2) 5/16" holes for attachment of Shrouds. Heavy-duty unit is attached to Deck with (4) 5/16" FH screws on 3 3/4" (fore & aft) and 1 1/2" (side to side) centers. Diamond-shaped unit is (maximum) 4 5/8" long x 2 3/8" wide x 1 5/8" high, and 5/16" thick at the Pin holes, base is 1/4" thick. Pin holes are 1 1/8" above deck, and 1 1/4" apart. In addition to shrouds, this item is frequently used for attachment of a staysail stay, with the aft hole used for the tack of the sail.

 

 
Port Deck Mount Chainplate for (3) 5/16" Pins: CP 84-C180B-P:

Starboard Deck Mount Chainplate for (3) 5/16" Pins: CP 84-C180B-S:

Cast Bronze Deck Mount Chainplate with (3) 5/16" holes for attachment of Shrouds and Backstay. Heavy-duty unit is attached to boat with (5) 3/8" FH screws. Diamond-shaped unit is (maximum) 5" long x 4" wide x 1 5/8" high, and 3/8" thick at the Pin holes. Pin holes are 1 1/8" above deck. As used on Cape Dory 30 Ketch, and others. Specify Port or Starboard.
 

 


Double Deck Mount Chainplate for 5/16" & 3/8" Pins
Double Deck Mount Chainplate for 5/16" & 3/8" Pins: CP 84-C186B-56:
Cast Bronze Deck Mount Chainplate with (1) 5/16" and (1) 3/8" hole for attachment of Shrouds. Heavy-duty unit is attached to Deck with (4) 5/16" FH screws on 3 3/4" (fore & aft) and 1 1/2" (side to side) centers. Diamond-shaped unit is (maximum) 4 5/8" long x 2 3/8" wide x 1 5/8" high, and 5/16" thick at the Pin holes, base is 1/4" thick. 5/16" Pin hole is 1 1/8" above deck, 3/8" Pin hole is 1" above deck. In addition to shrouds, this item is frequently used for attachment of a staysail stay, with the aft hole used for the tack of the sail.

 


Deck Mount Chainplates for 3/8" Pins
Deck Mount Chainplate for 3/8" Pin: Sch 84-15X:
Stainless Steel Deck Mount Chainplate with 3/8" hole for attachment of Shroud. Investment Cast SS Chainplate is attached to Deck with (2) 5/16" FH screws on 1 3/8" centers. Diamond-shaped unit is (maximum) 2 7/16" long x 1 3/4" wide x 1 1/2" high, Pin hole is 1" above deck.

 

Sch 84-15X
Deck Mount Chainplate for 3/8" Pin: CP 84-C181B:

Cast Bronze Deck Mount Chainplate with 3/8" hole for attachment of Shroud. Heavy-duty unit is attached to Deck with (2) 1/2" FH screws on 1 5/8" centers. Unit is 3 1/4" long x 2 11/16" wide x (maximum) 2" high, and 3/8" thick at the Pin hole. Pin hole is 1 1/4" above deck.

 

Double Deck Mount Chainplate for (2) 3/8" Pins: CP 84-C186B-66:
Cast Bronze Deck Mount Chainplate with (2) 3/8" holes for attachment of Shrouds. Heavy-duty unit is attached to Deck with (4) 5/16" FH screws on 3 3/4" (fore & aft) and 1 1/2" (side to side) centers. Diamond-shaped unit is (maximum) 4 5/8" long x 2 3/8" wide x 1 5/8" high, and 5/16" thick at the Pin holes, base is 1/4" thick. Pin holes are 1" above deck, and 1 1/4" apart. In addition to shrouds, this item is frequently used for attachment of a staysail stay, with the aft hole used for the tack of the sail.

 


Deck Mount Chainplates for a 1/2" Pin
Deck Mount Chainplate for 1/2" Pin: CP 84-C199B:

Cast Bronze Deck Mount Chainplate with 1/2" hole for attachment of Shroud. Heavy-duty unit is attached to Deck with (4) 3/8" FH screws on 2" centers. Unit is 3 1/4" square x (maximum) 2 1/8" high, and 9/16" thick at the Pin hole. Pin hole is 1 1/4" above deck.

 

CP 84-C199B

Deck Mount Chainplates for a 5/8" Pin
Deck Mount Chainplate for 5/8" Pin: CP 84-C219B:

Cast Bronze Deck Mount Chainplate with 5/8" hole for attachment of Shroud. Heavy-duty unit is attached to Deck with (6) 1/2" FH screws. Unit is 4 1/2" long x 3 5/16" wide x (maximum) 3" high, and 5/8" thick at the Pin hole. Pin hole is 2 1/16" above deck.

~ Back to Chainplates Main Page ~

~ Home ~