Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com        Ordering/Questionsp

Bronze Deck Fills


Bronze Deck Fills
These Traditional Cast Bronze Deck Fills are carefully machined and Burnished. Deck Fills have low-profile domed bases and are labeled with their function cast into the base. Caps are slotted, easily unscrewed from the base with a screwdriver, coin, or almost anything. A rubber O-Ring is seated on the cap to help prevent water intrusion.


Bronze Deck Fills 
Bronze Replacement Deck Fill Caps
Bronze Deck Fill Keys


Bronze Deck Fills
 

Water Deck Fill - Burnished Bronze: PP 119-WaterBZ:

Diesel Deck Fill - Burnished Bronze: PP 119-DieselBZ:

Burnished cast Bronze Deck Fills with threaded Bronze Cap are designed to accept 1 1/2" (37mm) ID Hose. Threaded Cap with retaining chain incorporates a rubber O-Ring, and has a slot for unscrewing with a screwdriver, coin, or almost anything. Unit is 3" (76mm) diameter, protrudes 1/4" (6mm) above deck, and 3" (76mm) below deck. Mounting requires a 1 3/4" (44mm) hole in the deck, unit attaches to deck with (3) 3/16" (#10) FH screws. The word "WATER" or "DIESEL" is cast into the base unit. The WATER Deck Fill is made from a special lead-free alloy to meet current California regulations, and is stamped "LF" for lead-free.


Waste Deck Fill - Burnished Bronze: PP 119-WasteBZ:

Waste Deck Fill is cast burnished Bronze with a threaded Bronze Cap. Unit is designed to accept 1 5/8" (41mm) ID Hose. Threaded Cap incorporates a rubber O-Ring, and has a slot for unscrewing with a screwdriver, coin, or almost anything. Unit is 3 1/2" (89mm) diameter, protrudes 3/8" (10mm) above deck, and 3" (76mm) below deck. Mounting requires a 2 1/4" (44mm) hole in the deck, unit attaches to deck with (3) 3/16" (#10) FH screws. The word "WASTE" is cast into the base unit.

 


Bronze Replacement Deck Fill Caps 
 

Bronze Deck Fill Cap, Small: PP 119-CapBZ-1.75:
Burnished Bronze Deck Fill Cap fits Bronze Diesel and Water Deck Fills on this page. Cap is 1 3/4" OD x 1/2" high (below head), and has slot for unscrewing with a screwdriver, coin, or almost anything.

 

Bronze Deck Fill Cap: PP 119-CapBZ-2:
Burnished Bronze Deck Fill Cap fits Bronze Waste Deck Fills on this page. Cap is 2" OD x 1/2" high (below head), and has slot for unscrewing with a screwdriver, coin, or almost anything.

 


Deck Fill Keys for Other Bronze Deck Fills 
 
Bronze Deck Fill Key - 1/4" x 1 1/8": Mer 119-KeyBZ:
Special cast Bronze Deck Fill Key has (2) 1/4" prongs on 1 1/8" centers. "Butterfly" design has holes on each end for attachment to a keychain. Fits all Deck Fills with 1/4" or larger holes on 1 1/8" centers.

 

Bronze "Universal" Deck Fill Key: PP 119K-35BZ:
Handy "Universal" hinged Bronze Deck Fill Key fits all Pin-Type Deck Fills. Cast Bronze hinged unit has SS Pins on the end - 3/16" on one side and 5/16" on the other, and will accommodate caps with hole centers from 5/8" to 7". Unit is 8" long x 1" wide and has hole on one end for attachment to a keychain.

 

Economy Deck Fill Key - 1/4": PP 119K-8G:
Economical Deck Fill Key fits Pin-Type Deck Fill Caps with 1/4" holes. Formed Galvanized steel wire unit is set at 3" wide, but can be squeezed down to 1". Unit is 7" long x .200" diameter.

~ Back to Deck Fills Main Page ~

~ Back to Hardware Main Page ~

~ Home ~