Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Rigging Pins, Stainless Steel


Rigging Pins are largely (in shorter lengths) a less costly alternative to Clevis Pins, commonly used in covered applications such as Masthead Sheave Axle Pins. Primary modern usage is as Clevis Pins, but in applications where longer individualized lengths are impractical, and in those rare applications where the Pin should be removable from either side.
Rigging Pins are measured by Diameter and Grip Length, a given Diameter is available in a variety of Grip lengths. Grip Length is the maximum length between 2 installed Cotter Pins. While a longer than ideal length may be used in some applications, proper sizing keeps dangerous protrusions and weight to a minimum.
Listed below are commonly stocked Rigging Pins, normally secured with Cotter Pins (Split Pins).
Part numbers are as Clevis Pins (diameter in 1/16's, lengths in 1/32's), meaning that a RP8-64 can be substituted for a CP8-64 (and vise versa).

If you require a Rigging Pin not listed here, please contact us specifying dimensions (Diameter & Grip Length), material (Stainless Steel, Bronze, Titanium, etc.), and application. If not in stock, we produce many Custom Rigging Pins and can quote them on a Custom basis.
See also: Clevis Pins, Fastpins and Sheave Axle Pins.

7|16" diameter

Stainless Steel Rigging Pins
Pin Diameter Part # Dia. x Grip length Common Usage  
1/4" RP4-44 1/4" x 1 3/8"      
  RP4-46 1/4" x 1 7/16"   Kenyon  
  RP4-52 1/4" x 1 5/8"     Kenyon Masthead  
  RP4-56 1/4" x 1 3/4"     Kenyon Masthead  
  RP4-88 1/4" x 2 3/4"      

5/16" RP5-44 5/16" x 1 3/8"    
  RP5-48 5/16" x 1 1/2"  b  
  RP5-52 5/16" x 1 5/8"   Kenyon Masthead  
  RP5-56 5/16" x 1 3/4"   Kenyon Masthead     b  
  RP5-112 5/16" x 3 1/2"  c b  

3/8" RP6-44 3/8" x 1 3/8"      
  RP6-52 3/8" x 1 5/8"     Kenyon Masthead  
  RP6-56 3/8" x 1 3/4"     Kenyon Masthead     b  
  RP6-68 3/8" x 2 1/8"      
  RP6-70 3/8" x 2 3/16" Kenyon  
  RP6-72 3/8" x 2 1/4"   b  
  RP6-80 3/8" x 2 1/2"  b  
  RP6-84 3/8" x 2 5/8"  c  
  RP6-88 3/8" x 2 3/4"     
  RP6-92 3/8" x 2 7/8"     
  RP6-96 3/8" x 3"           
  RP6-104 3/8" x 3 1/4"     
  RP6-112 3/8" x 3 1/2"  b  
  RP6-132 3/8" x 4 1/8"     
  RP6-164 3/8" x 5 1/8"     
  RP6-208 3/8" x 6 1/2"  CD-5 Deck Collar  

7/16" RP7-48M 7/16" x 1 1/2"  c b  
  RP7-112 7/16" x 3 1/2" b  

1/2" RP8-44 1/2" x 1 3/8"    
  RP8-56 1/2" x 1 3/4" Masthead  b  
  RP8-60 1/2" x 1 7/8"    
  RP8-64 1/2" x 2"       Masthead    c b Q
  RP8-68 1/2" x 2 1/8" Masthead  
  RP8-72 1/2" x 2 1/4" b 1
  RP8-76 1/2" x 2 3/8"   1
  RP8-80 1/2" x 2 1/2" c b  
  RP8-92 1/2" x 2 7/8"    
  RP8-96 1/2" x 3"       c  
  RP8-100 1/2" x 3 1/8" Kenyon Spreader Tip  
  RP8-112 1/2" x 3 1/2" b  
  RP8-116 1/2" x 3 5/8"  Gooseneck Slide Q
  RP8-172 1/2" x 5 3/8"   Q

5/8" RP10-40 5/8" x 1 1/4"     b  
  RP10-56 5/8" x 1 3/4"     b  
  RP10-62 5/8" x 1 15/16" Masthead  
  RP10-72 5/8" x 2 1/4"     b  
  RP10-80 5/8" x 2 1/2"     c  
  RP10-84 5/8" x 2 5/8"     s  
  RP10-112 5/8" x 3 1/2"     b  

3/4" RP12-56 3/4" x 1 3/4" Masthead 1
  RP12-72 3/4" x 2 1/4"    
  RP12-88 3/4" x 2 3/4"    
  RP12-104 3/4" x 3 1/4" s  

7/8" RP14-72 7/8" x 2 1/4" Masthead 1

1" RP16-60 1" x 1 7/8"   1

~ Back to Rigging Main Page ~

~ Back to Hardware Main Page ~

~ Back to Rig-Rite Home Page ~