Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com         Ordering/Questionsp

Aluminum T-Track


Aluminum T-Track & End Stops
T-Track is essentially Flat Track with an integral riser. Commonly used on deck for Jib and Genoa lead Cars and on the Mast for Spinnaker and Gooseneck Slides, it allows for easily adjustable placement of load bearing fittings. Most T-Track has intermediate holes (between the fastener holes) for use with Spring Pin or Screw Pin adjustable stops.

Merriman Standard Extruded Aluminum T-Track is listed below by size (Track width).
Metric Aluminum T-Track is listed separately, see Amiot T-Track, and Goiot T-Track.
Bronze T-Track is listed separately.

We can also fabricate Stainless Steel T-Track on Special Order, please forward details for a quote.
See also, Flat Track and other types of Track on the Track Main Page.

3/4" T-Track
1" T-Track
1 1/4" T-Track
1 1/2" T-Track


Aluminum T-Track
3/4" Aluminum T-Track
Commonly used for Spinnaker Track on boats to 20' (6M), and for Jib Tracks on boats to 24'.
 
3/4" Aluminum T-Track - Black: Mer 7000B-__':
3/4" Aluminum T-Track - Clear: Mer 7000C-__':
Standard 3/4" extruded Aluminum T-Track is 3/4" wide with a 1/8" thick flange (22x3mm), and is (maximum) 5/16" (8mm) high. Track is drilled for 1/4" (6mm) FH screws on 4" (102mm) centers, and has 1/4" stop holes in between.
Available in 2', 3', 4', 6', 8', 10' & 12' lengths, please specify.
* Due to hole spacing constraints, length tolerance is +/- 2 1/4". When ordered in pairs, both pieces will be the same length. If a precise length or distance to first hole is required, please specify details.

 

34t-trk.gif (1058 bytes)
End Stop for 3/4" Aluminum T-Track - Black: Mer 7000B-ES:
End Stop for 3/4" Aluminum T-Track - Gray: Mer 7000C-ES:
Black or Gray plastic End Stop for 3/4" T-Track extends 7/8" beyond Track and fastens with a 1/4" (6mm) FH screw 5/16" from Track end.

 


1" Aluminum T-Track
Commonly used for Spinnaker Track on boats to 30' (9M), and for Jib Tracks on boats to 32'.
 
1" Aluminum T-Track - Black: Mer 7001B-__':
1" Aluminum T-Track - Clear: Mer 7001C-__':
Standard 1" extruded Aluminum T-Track is 1" wide with a 1/8" thick flange (26x3mm), and is (maximum) 3/8" (10mm) high. Track is drilled for 1/4" (6mm) FH screws on 4" (102mm) centers, and has 1/4" stop holes in between.
Available in 2', 3', 4', 6', 8', 10' & 12' lengths, please specify.
* Due to hole spacing constraints, length tolerance is +/- 2 1/4". When ordered in pairs, both pieces will be the same length. If a precise length or distance to first hole is required, please specify details.

 

34t-trk.gif (1058 bytes)
End Stop for 1" Aluminum T-Track - Black: Mer 7001B-ES:
End Stop for 1" Aluminum T-Track - Gray: Mer 7001C-ES:
Black or Gray plastic End Stop for 1" T-Track extends 1" beyond Track and fastens with a 1/4" (6mm) FH screw 5/16" from Track end.

 


1 1/4" Aluminum T-Track
Commonly used for Spinnaker Track and for Jib Tracks on boats to 50' (15M).
 
1 1/4" Aluminum T-Track - Black: Mer 7002B-__':
1 1/4" Aluminum T-Track - Clear: Mer 7002C-__':
Standard 1 1/4" extruded Aluminum T-Track is 1 1/4" wide with a 3/16" thick flange (32x5mm), and is (maximum) 7/16" (11mm) high. Track is drilled for 5/16" (8mm) FH screws on 4" (102mm) centers, and has 3/8" stop holes in between.
Available in 2', 3', 4', 5', 6', 8', 10' & 12' lengths, please specify.
* Due to hole spacing constraints, length tolerance is +/- 2 1/4". When ordered in pairs, both pieces will be the same length. If a precise length or distance to first hole is required, please specify details.

 

34t-trk.gif (1058 bytes)
End Stop for 1 1/4" Aluminum T-Track - Black: Mer 7002B-ES:
End Stop for 1 1/4" Aluminum T-Track - Gray: Mer 7002C-ES:
Black or Gray plastic End Stop for 1 1/4" T-Track extends 1 3/16" beyond Track and fastens with a 5/16" (8mm) FH screw 3/8" from Track end.

 

End Stop for 1 1/4" Aluminum T-Track: Mer 4473-C:
Burnished cast Aluminum End Stop for 1 1/4" T-Track fastens with a 1/4" (6mm) FH screw.

 


1 1/2" Aluminum T-Track
Commonly used for Spinnaker Track and for Jib Tracks on boats over 50' (15M).
 
1 1/2" Aluminum T-Track - Black: Sch 41-12':
Standard 1 1/2" extruded Aluminum T-Track is a 1 1/2" (38mm) wide with a 1/4" (6mm) thick flange, and is (maximum) 1/2" (13mm) high. Track is drilled for 3/8" (10mm) FH screws on 4" (102mm) centers, and has 7/16" (11mm) diameter stop holes in between. Black hardcote anodized T-Track is available in 12-foot lengths.

 

34t-trk.gif (1058 bytes)
End Stop for 1 1/2" Aluminum T-Track - Black: Sch 74-39:
Cast Aluminum End Stop for 1 1/2" T-Track extends 1 3/8" beyond Track and fastens with a 3/8" (10mm) FH screw 1/2" from Track end. With Black anodized finish.

~ Back to Track Main Page ~

~ Back to Sailboat Hardware Main Page ~

~ Home ~