Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Navtec Series 500 Turnbuckles


Navtec Series 500 Turnbuckles are unique in modern design, with two 316 Stainless Steel bodies and a central Bronze screw. Designed for use with both Wire and Rod Rigging, modular components allow a variety of configurations for use in almost any application. Versions are produced for use with Standard Chainplates or Navtec U-Bolt Chainplates, components are commonly used with discontinuous Spreader Tips for both Wire and Rod Rigging. Design allows Standard Screw to be replaced with Long Screw in the event the Swage End has to be replaced or if the rigging is otherwise too short.
Parts and Components are listed separately, See: Navtec Series 500 Turnbuckle Parts & Components.
 

  Navtec Series 500 Turnbuckles - Double Toggle - C600
Navtec C600 Turnbuckles are Series 500 Turnbuckles with Toggles (Eye Ends w/ Toggle) on each end. Standard length Screws (thru 3/4") are nickel-plated, all are coated with a molybdenum disulfide lubricant to reduce friction without attracting dirt. Suitable for use with all standard Rod, Swage and mechanical Eyes (Norseman, Sta-Lok, Hi-Mod), and standard Chainplates of matching Pin Size.
 
 Part #  Thread Size  Pin Size  
  Nav C600-001010X  5/16"  5/16"  
  Nav C600-001212X  3/8"  3/8"  
  Nav C600-001414X  7/16"  7/16"  
  Nav C600-001416  7/16"  1/2"  
  Nav C600-001616  1/2"  1/2"  
  Nav C600-001620  1/2"  5/8"  
  Nav C600-002020  5/8"  5/8"  
  Nav C600-002424  3/4"  3/4"  
  Nav C600-002828  7/8"  7/8"  
  Nav C600-003636  1 1/8"  1 1/8"  

 


  Navtec Series 500 Turnbuckles w/ Wire Swage & Toggle - C500
Navtec Series 500 Turnbuckles are available with Wire Swage Ends in sizes for 1/8" to 3/8" Wire. Originally produced for Wire up to 3/4", most Swage Ends and all other components are available.
See: Navtec Series 500 Turnbuckle Parts & Components.
 
 Part #  Wire Size  Thread Size  Pin Size  
  Nav C500-040808X  1/8"  1/4"  1/4"  
  Nav C500-050808X  5/32"  1/4"  1/4"  
  Nav C500-051010X  5/32"  5/16"  5/16"  
  Nav C500-061010X  3/16"  5/16"  5/16"  
  Nav C500-061012X  3/16"  5/16"  3/8"  
  Nav C500-061212X  3/16"  3/8"  3/8"  
  Nav C500-071212X  7/32"  3/8"  3/8"  
  Nav C500-071414X  7/32"  7/16"  7/16"  
  Nav C500-081212  1/4"  3/8"  3/8"  
  Nav C500-081414X  1/4"  7/16"  7/16"  
  Nav C500-081616  1/4"  1/2"  1/2"  
  Nav C500-091416  9/32"  7/16"  1/2"  
  Nav C500-091616X  9/32"  1/2"  1/2"  
  Nav C500-101616  5/16"  1/2"  1/2"  
  Nav C500-101620  5/16"  1/2"  5/8"  
  Nav C500-102020  5/16"  5/8"  5/8"  
  Nav C500-122020  3/8"  5/8"  5/8"  

 


  Navtec Series 500 Turnbuckles w/ Wire Swage & Eye End - C510
Navtec Series 500 Turnbuckles are available with Wire Swage and Eye End (C510) in all Wire and Pin sizes as C500, above. Substitute C510- prefix for all C500- Turnbuckles listed above.
 

  Navtec Series 500 Turnbuckles w/ Wire Swage & Upset Toggle - C515
Navtec Series 500 Turnbuckles are available with Wire Swage and Upset Toggle (C515) in all Wire sizes as C500, above. Substitute C515- prefix for all C500- Turnbuckles listed above. Designed for use with Navtec U-Bolt Chainplates.
 

  Navtec Series 500 Turnbuckles for Rod Rigging
 

  Navtec Series 500 Turnbuckles for Rod w/ Toggle - C550
Navtec Series 500 Rod Turnbuckles are available in sizes for -4 to -400 (1 3/4") Rod. Designed with two 316 SS bodies and a central Bronze screw, sizes larger than -60 use Bronze Bodies and a SS Screw to reduce size and weight. For Parts and Components for Navtec Series 500 Turnbuckles,
See: Navtec Series 500 Turnbuckle Parts & Components.
 
 Part #  Rod Size  Thread Size  Pin Size  
  Nav C550-041010X  -4  5/16"  5/16"  
  Nav C550-061212  -6  3/8"  3/8"  
  Nav C550-081414  -8  7/16"  7/16"  
  Nav C550-081416  -8  7/16"  1/2"  
  Nav C550-081616  -8  1/2"  1/2"  
  Nav C550-101616  -10  1/2"  1/2"  
  Nav C550-121620  -12  1/2"  5/8"  
  Nav C550-122020  -12  5/8"  5/8"  
  Nav C550-152020  -15  5/8"  5/8"  
  Nav C550-172020  -17  5/8"  5/8"  
  Nav C550-222424  -22  3/4"  3/4"  
  Nav C550-302828  -30  7/8"  7/8"  
  Nav C550-403232  -40  1"  1"  
  Nav C550-483636  -48  1 1/8"  1 1/8"  
  Nav C550-604040  -60  1 1/4"  1 1/4"  

 


  Navtec Series 500 Turnbuckles for Rod w/ Eye End - C560
Navtec Series 500 Turnbuckles are available for Rod with Eye End (C560) in all Rod and Pin sizes as C550, above. Substitute C560- prefix for all C550- Turnbuckles listed above.

  Navtec Series 500 Turnbuckles for Rod w/ Upset Toggle - C565
Navtec Series 500 Turnbuckles are available for Rod with Upset Toggle (C565) in all Rod sizes as C550, above. Substitute C565- prefix for all C550- Turnbuckles listed above. Designed for use with Navtec U-Bolt Chainplates.

~ Back to Turnbuckles Main Page ~

~ Back to Rigging ~

~ Back to Rig-Rite Home Page ~