Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Rigging Toggles


Rigging Toggles are used to connect various pieces of of Rigging to Spars, Tangs, Chainplates, Turnbuckles, or other pieces of Rigging. Formed Stainless Steel Strap Toggles act as a universal joint and are available in Eye/Jaw configurations (connecting an Eye to a Clevis), and Double Jaw configurations (for connecting two Eyes). Many other more specialized Toggles are components of larger assemblies and are listed under the particular item they are used with, See: Spars.
See also, Masthead & Forestay Toggles, and Forged Bronze Turnbuckle Toggles.
 

Eye/Jaw Rigging Toggles
Navtec Type 316 SS Eye/Jaw Rigging Toggles fit on a cross-pin the same size as the primary Pin.
Measurements are Navtec Standard, S (Short) suffix denotes an OS product.
 
 Part #  Pin Size  Thick Strap Width
@ Top
Strap Width
@ Bottom
Length between
Pin Centers
 Nav J100-0808   1/4"  "  1/4"  5/8"  
 Nav J100-1010   5/16"  .12"  5/16"  3/4"  1 5/8"
 Nav J100-1010S   5/16"  .115"  5/16"  21/32"  1 3/8"
 Nav J100-1212   3/8"  .18"  3/8"  3/4"  1 3/4"
 Nav J100-1212S   3/8"  .154"  .393" 10mm  .78" 20mm  1 5/8"
 Nav J100-1414   7/16"  .18"  7/16"  1"  2"
 Nav J100-1414S   7/16"  .154"  7/16"  1" 25mm  1 3/4"
 Nav J100-1616   1/2"  .25"  1/2"  1"  2 1/4"
 Nav J100-2020   5/8"  .31"  5/8"  1 1/4"  2 1/2"
 Nav J100-2424   3/4"  .37"  3/4"  1 1/2"  2 7/8"
 Nav J100-2424S   3/4"  .31"  3/4"  1.54"  2 3/4"
 Nav J100-2828   7/8"  .37"  7/8"  2"  3 1/4"
 Nav J100-3232   1"  .5"  1"  2"  3 3/4"
 Nav J100-3636   1 1/8"  .5"  1 1/8"  2"  4"
 Nav J100-4040   1 1/4"  .62"  1 1/4"  2 1/2"  4 1/2"
 Nav J100-4444   1 3/8"  .75"  1 3/8"  2 3/4"  5 1/2"
 Nav J100-4848   1 1/2"  .75"  1 1/2"  3 1/4"  5 3/4"

 

K-11537

 

 


Double Jaw Rigging Toggles
Type 316 SS Double Jaw Rigging Toggles come complete with two (2) Pins of the same diameter.
Measurements are Navtec Standard, S (Short) & L (Long) suffix denotes an OS product.
Commonly used with Stemball / Eye Adapters.
 
 Part #  Pin Size  Thick Strap Width Slot Width Length between
Pin Centers
 Nav J200-0808   1/4"  .09"  5/8"  1/4"  1 1/16"
 Nav J200-1010   5/16"  .12"  3/4"  5/16"  1 7/16"
 Nav J200-1010S   5/16"  .12"  13/16"  5/16"  1 7/16"
 Nav J200-1212   3/8"  .12"  1"  5/16"  1 1/2"
 Nav J200-1212L   3/8"  .165"  1"  3/8"  1 3/4"
 Nav J200-1414   7/16"  .18"  1"  1/2"  1 3/4"
 Nav J200-1414S   7/16"  .20"  1"  .41"  1 7/8"
 Nav J200-1616   1/2"  .18"  1 1/4"  1/2"  2 1/8"
 Nav J200-2020   5/8"  .18"  1 9/16"  9/16"  2 1/2"
 Nav J200-2020S   5/8"  .23"  1 9/16"  9/16"  2 1/8"
 Nav J200-2424   3/4"  .25"  2"  3/4"  2 3/4"
 Nav J200-2424S   3/4"  .242"  2"  3/4"  2 3/8"
 Nav J200-2828   7/8"  .37"  2"  7/8"  3 1/4"
 Nav J200-2828S   7/8"  .235"  2 3/8"  13/16"  2 3/4"
 Nav J200-3232   1"  "  2 1/2"  1"  3 5/8"
 Nav J200-3232S   1"  .314"  2 3/8"  7/8"  3"
 Nav J200-3636   1 1/8"  "  2 1/2"  1 1/8"  4"
 Nav J200-3636S   1 1/8"  .315"  2 3/4"  1"  3 5/8"
 Nav J200-4040   1 1/4"  "  3"  1 1/4"  5"
 Nav J200-4040S   1 1/4"  .405"  2 3/4"  1 1/8"  4 1/8"
 Nav J200-4444   1 3/8"  "  3"  1 3/8"  5 5/8"
 Nav J200-4848   1 1/2"  "  3 1/2"  1 1/2"  6 1/4"
 Nav J200-5656   1 3/4"  "  4"  1 3/4"  6 7/8"
 Nav J200-6060   1 7/8"  "  5"  1 7/8"  7"
 Nav J200-6868   2 1/8"  "  5 1/2"  2 1/8"  7"

 

 

 

 

 

 

 

 

 

 

 


~ Back to Spars Page ~

~ Back to Rigging Page ~

~ Back to Hardware Page ~

~ Back to Rig-Rite Home Page ~