 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
3756 Old-Style Internal Gooseneck Parts |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
3756 Old-Style Internal Gooseneck Parts |
|
|
|
|
| Note: Kenyon Internal Gooseneck Assemblies are now equipped with the new friction-lock lever-action cams for greater holding ability, and SS cover plates to keep the reef lines captive at all times. Old-Style units featured Spring Cams (with or w/o handles), and different reef sheaves than the improved version. The Old-Style units are easily identified by the absence of the SS cover plates. While upgrading to the improved style using one of the K-11443 Conversion Kits (below) is recommended, original parts for the Old-Style gooseneck are still available, below. | |
|
|
|
|
Reefing Sheave for Old Style 3756 Gooseneck: K-10358:
Molded Nylon sheave w/ integral Bronze bushing is 1 1/16" OD x 35/64" (<9/16") wide x 3/8" ID.
|
|
| Reefing Sheave/Cam Axle for Old Style 3756 Gooseneck: K-10381: | |
|
SS axle pin is 3/8" dia. x 2.34" grip, with a turned groove on each end to accept 3/8" SS Snap Rings,
K-63015 (2 included).
|
|
|
Reef Cam Assembly for Old Style Gooseneck - Port: K-GNCA-P: Reef Cam Assembly for Old Style Gooseneck - Star.: K-GNCA-S: |
|
|
Extruded aluminum Spring-Cam assembly fits on 3/8" pin and includes Cam, SS spring, molded nylon
insert, and one SS Snap ring for standard 3/8" axle. These items are no longer available,
but the newer style that incorporate a SS handle (below) are.
|
|
|
Reef Cam Ass'y w/ handle for Old Style Gooseneck - Port: K-GNCAH-P:
Reef Cam Ass'y w/ handle for Old Style Gooseneck - Starboard: K-GNCAH-S: |
|
|
Extruded aluminum Spring-Cam assembly with handle fits on 3/8" pin and includes Cam, SS spring,
molded nylon insert, and one SS Snap ring for standard 3/8" axle. As K-GNCA-P, and
S (above), but cam incorporates a SS handle. Specify Port or Starboard.
|
|
|
Outhaul Sheave for 3756 Gooseneck: K-198-7A:
Anodized aluminum sheave is 1 3/4" OD x 31/64" wide x 3/8" ID.
|
|
|
Outhaul Sheave Axle for 3756 Gooseneck: K-10380:
SS axle pin is 3/8" dia. x 1" grip, with a turned groove on each end to accept 3/8" SS Snap Rings, K-63015 (2 included).
|
|
|
SS Snap Rings for 3/8" Axle Pin: K-63015-2P:
In 2-pack. Require small snap ring pliers for attachment.
|
 |
|
|
|
|
Double Reef Cam Conversion Kit for 3756: K-11443:
Cam Conversion Kit for 3756 Gooseneck converts Old-Style Spring-Cam arrangement to the New-Style friction cam assembly. Easily installed Kit includes everything necessary for 2 reef lines including Cam levers, adjustable friction washers, reef sheaves, SS spacers, Cover plates, bolts and locknuts. No machining is required. Individual components are listed separately, See Parts for 3756 Internal Gooseneck Assembly.
|
|
|
New-Style Port Reef Cam Conversion Kit for 3756: K-11443P:
New-Style Starboard Reef Cam Conversion Kit for 3756: K-11443S: |
|
|
Single Cam Conversion Kit for 3756 Gooseneck converts Old-Style Spring-Cam arrangement to the
New-Style friction cam assembly. Easily installed Kit includes everything necessary for single reef
line including Cam lever, adjustable friction washers, reef sheave, SS spacer, Cover plate, bolts
and locknuts. No machining is required. Specify Port or Starboard. Individual components are listed
separately, See Parts
for 3756 Internal Gooseneck Assembly.
|
|
| New-Style Sheave Conversion Kit for 3756 Gooseneck: K-11443NC: | |
|
Sheave Conversion Kit for 3756 Gooseneck converts Old-Style Gooseneck to the New-Style with Cover
Plates, Sheaves, and No cams. Easily installed Kit includes everything necessary for leading
reef lines down and aft, including (2) reef sheaves, (4) SS spacers, Port and Starboard Cover plates,
bolts and locknuts. No machining is required. Individual components are listed separately, See
Parts for 3756
Internal Gooseneck Assembly.
As K-11443, above, but with 2 SS Spacers to replace the reef cams.
|
|
~ Home ~
