Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Kenyon K-1264 Hinged Mastplate Assembly


Hinged Mast Plate Assembly: K-1264:
SS double channel hinge assembly is used on Kenyon D-Section (3 3/4" x 2 1/4") and smaller Mast Sections. Lower channel bolts to deck w/ (4) 1/4" bolts on 4" x 1 11/16" hole centers. Top plate hinges forward or aft on (2) 1/4" pins, and is attached to mast step with (2) 1/4" bolts and special compression spacer nuts (included), to handle greater rigging loads. Hole pattern is compatible with most Kenyon Mast Steps, other Steps will have to be drilled. Base is 5 1/4" x 2 3/4", unit is 3/4" high. 

 

K-1264

Kenyon Spars K-1264 - Components
Pin for K-1264 Hinged Mast Plate Assembly: K-9262:

SS Pin is 1/4" diameter with a 2 3/4" grip length, and is pointed on one end for easy insertion. Includes (2) cotter rings.

 

K-9262

Top Plate only for K-1264 Hinge Assembly: K-9263:

Formed SS Top Plate is 5 1/4" long x 2 3/4" wide x .076" thick, with (2) 1/4" holes (on 1 7/16" centers) for attachment to Mast Step.

 

K-9263
Bottom Plate only for K-1264 Hinge Assembly: K-9264:
Formed SS Bottom Plate is 5 1/4" long x .076" thick, with (4) 1/4" holes for attachment to Deck.

 

K-9264
Compression Spacer for K-1264 Hinge Assembly: K-9265A:

Anodized Aluminum Spacer is 1" Round Nut x 1/2" thick with a 1/4"-20 interior thread. Includes standard SS bolt 1/4"-20 x 3/4" long.
K-9265A

~ Back to Mast Step Hinge Assemblies ~

~ Back to Kenyon Main Page ~

~ Home ~