Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

7/8" OD Spinnaker Poles & Fittings


Standard 7/8" OD Spinnaker Pole Tube
Measurements: 7/8" OD x 0.77" ID (22.2mm x 19.6mm)
Wall Thickness: .050"
Weight/ft.: .153 lbs.
Moments of inertia:
Circumference: 2.75"
Alloy: 6063-T6
Stock Lengths:
Common Boat usage: Small, 4' - 8' Adjustable Whisker Poles  
round_tube.TIF (16698 bytes)
7/8" OD Standard Spinnaker Pole Tube is primarily used as the inner (smaller) tube in the smallest of adjustable Whisker Poles. Standard Pole Fittings for this tube size are listed below.
 

Standard 7/8" OD Spinnaker Pole Tube

7/8" OD Spinnaker Pole Tube - Clear Anodized: RTA 0.87-050A-___:
7/8" OD Spinnaker Pole Tube is available on special order only. To order, specify tube length. 


7/8" OD Spinnaker Pole End Fittings

EL Piston End for 7/8" OD Tube: EF-087-ELAT:
Lexan EL Piston End has handy thumb tab with hole for attachment of trip line. Angled Piston Tab allows for quick attachment by pressing against Ring. Black molded end is attached to a 3" long aluminum tube which fits over 7/8" OD tube. Unit projects 2 3/4" (maximum) from tube end. F

 

 
Spike End for 7/8" OD Tube: NF 10074-7:
Lexan Spike End has 5/16" diameter shaft with a 3/8" OD ball tip. Outboard Spike End is inserted in clew grommet, sheet tension keeps it engaged. Black molded end is 2 1/2" long and projects 1 3/4" (maximum) from tube end.   F
 

~ Back to Spinnaker Poles Main Page ~

~ Back to Spars Main Page ~

~ Home ~