Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Reaching Strut Mast Fittings


On smaller boats Reaching Struts are usually attached to a fixed Mast Eye, or Ring, one on each side of the Mast, See Spinnaker Pole Mast Eyes.

On larger boats Reaching Struts usually use a variety of Brackets with Pins to fit the special inboard ends available. Listed below are Reaching Strut Mast Fittings for use with Forespar TS Pin Pole Ends and Sparcraft Bayonet Pin Pole Ends.

On some larger Racing and Cruising yachts Reaching Struts will be attached to a Track-mounted Car, normally used for a Whisker Pole, on each side of the Mast, See: Spinnaker Cars.

See also: Spinnaker Pole Mast Eyes, Spinnaker Poles, and Spinnaker Cars.
 


Reaching Strut Mast Brackets w/ Eye
 See also: Spinnaker Pole Mast Eyes.

Isomat NG1 Reaching Strut Mast Eye: NG1-38:
Diamond shaped SS Reaching Strut Mast Eye with welded horizontal Ring. Unit is 67mm (2 1/4") high x 85mm (3 1/4") wide, and attaches to the side of the Mast with (4) 1/4" screws or rivets. 8mm Ring has 31mm (1 1/4") ID. Base is formed for use on Isomat NG-51 and smaller NG Mast Sections.  
 
Isomat NG2 Reaching Strut Mast Eye: NG2-38:
Diamond shaped SS Reaching Strut Mast Eye with welded vertical Eye. Unit is 115mm (4 1/2") high x 73mm (2 7/8") wide, and attaches to the side of the Mast with (4) 1/4" screws or rivets. 10mm Eye has (minimum) 40mm (1 1/2") ID. Base is formed for use on Isomat NG-60 and larger NG Mast Sections.  

 


Reaching Strut Mast Brackets for Forespar TS Ends

Forespar Reaching Strut Mast Bracket w/ TS Pin: For TS-MPA:
Forespar Reaching Strut Mast Bracket with Aluminum TS Pin & Toggle to fit all Forespar TS type Pole ends. Cast Aluminum Bracket is 3 3/4" high x 1 11/16" wide, and attaches to Mast with (4) 1/4" FH screws on 3" (vertical) x 15/16" (horizontal) centers. Standard Aluminum TS Pin is 1" OD, with Grey anodized finish. RSMF

 

Forespar Reaching Strut Mast Bracket w/ Detachable TS Pin: For TS-MPS-R:
Forespar Reaching Strut Mast Bracket with Removable Stainless Steel TS Pin & Toggle fits all Forespar TS type Pole ends. Assembly includes SS TS Pin & Toggle Assembly, For TS-PT, and easily removable 1/2" Fastpin. Cast Aluminum Bracket is 3 3/4" high x 1 11/16" wide, and attaches to Mast with (4) 1/4" FH screws on 3" (vertical) x 15/16" (horizontal) centers.

 

 
  Forespar TS Pin & Toggle Ass'y: For TS-PT:
Replacement Forespar TS Pin & Toggle Assembly fits all Forespar TS type Pole ends, and Spinnaker Cars (and Brackets) with a 1/2" vertical Pin and clearance for a 1" Toggle. Stainless Steel TS Pin is 1" OD x 3 5/8" long, SS Toggle is 1" high with hole for a 1/2" Pin, and is 2 3/4" between Pin centers.

 

For_TS-PT.gif (5795 bytes)
  Forespar Reaching Strut Mast Bracket w/ 1/2" Fastpin: For TS-MB:
  Forespar Mast Bracket and Fastpin only, as used with TS Pin & Toggle Assembly. Grey anodized cast Aluminum Bracket is 3 3/4" high x 1 11/16" wide, and attaches to Mast with (4) 1/4" FH screws on 3" (vertical) x 15/16" (horizontal) centers. SS Fastpin is 1/2" diameter with a 2 1/4" grip length.

 

 

Fastpin for Forespar Reaching Strut Mast Bracket: FP 8D-2.25:
Stainless Steel Fastpin is 1/2" diameter with a 2 1/4" grip length.

 

 

Reaching Strut Mast Brackets for Sparcraft Bayonet Pin Ends

Reaching Strut Mast Bracket w/ Sparcraft Bayonet Pin: SPC RS-MF-RSP:
Reaching Strut Mast Bracket with Removable Sparcraft Bayonet Pin fits all Sparcraft Bayonet type Pole ends. Assembly includes Stainless Steel Bayonet Pin & Toggle Assembly, SPC 73-13PTA-8, and easily removable 1/2" Fastpin. Cast Aluminum Bracket is 4" high x 2" wide, and attaches to Mast with (4) 1/4" FH screws on 3 1/8" (vertical) x 1 5/16" (horizontal) centers.

 

 
  Sparcraft Reaching Strut Mast Bracket w/ 1/2" Fastpin: SPC RS-MFP:
  Mast Bracket and Fastpin only, as used with Sparcraft Bayonet Pin & Toggle Assembly. Grey anodized cast Aluminum Bracket is 4" high x 2" wide, and attaches to Mast with (4) 1/4" FH screws on 3 1/8" (vertical) x 1 5/16" (horizontal) centers. SS Fastpin is 1/2" diameter with a 2 1/2" grip length.



 

 

  Sparcraft Bayonet Pin only: SPC 73-13P:
Replacement Sparcraft Bayonet Pin only, fits all Sparcraft Bayonet type Pole ends. Stainless Steel Sparcraft Bayonet Pin is 7/8" OD x 4" long (beneath head), head is 9/16" thick with hole for 1/2" pin. Unit is (maximum) 5 3/4" long.

 

SC_73-13Ph.gif (4246 bytes)
  Sparcraft Type 2 Toggle only: SPC 73-12T2:
Replacement Sparcraft Toggle (Type 2) fits Sparcraft Bayonet Pin and Spinnaker Cars (and Brackets) with a 1/2" vertical Pin and clearance for a 1 3/16" Toggle. Stainless Steel Toggle is 1 3/16" high x 1 3/8" wide with holes for 1/2" Pins, and measures 1 5/8" between Pin centers. Horizontal (1/2") Pin is included.

 

SC_73-13T1.gif (9506 bytes)
  Fastpin for Sparcraft Reaching Strut Mast Bracket: FP 8D-2.5:
Stainless Steel Fastpin is 1/2" diameter with a 2 1/2" grip length.
 

~ Back to Spinnaker Poles Main Page ~

~ Back to Spars Main Page ~

~ Home ~