Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Spinnaker Pole Ends for Wood Poles


A variety of Spinnaker Pole and related Pole Ends for use with Wood Poles are available in Bronze and in Stainless Steel.
See also: Spinnaker Cars, and Spinnaker Halyard Blocks. 
 

Bronze Spinnaker Pole Ends

Bronze Spinnaker Pole End - Small: BR SPE-100B:
Cast Bronze Piston End for wood poles incorporates eyes for attachment of pole lift and foreguy (or bridles). Piston End has a Bronze spring-loaded plunger pin that must be manually retracted to attach the fitting to a ring or guy. Small Pole End fits poles tapered to 1" (minimum) diameter, and will accommodate line up to 1/2". Polished Bronze unit is 7 1/4" long, projects approximately 1 1/2" beyond pole end and is attached to pole with (3) 5/16" FH screws (included).

 

Bronze Spinnaker Pole End - Large: BR SPE-175B:
Cast Bronze Piston End for wood poles incorporates eyes for attachment of pole lift and foreguy (or bridles). Piston End has a Bronze spring-loaded plunger pin that must be manually retracted to attach the fitting to a ring or guy. Large Pole End fits poles tapered to 1 3/4" (minimum) diameter, and will accommodate line up to 3/4". Polished Bronze unit is 10" long, projects approximately 2 1/2" beyond pole end and is attached to pole with (3) 1/4" FH screws (included).

 


SS Spinnaker Pole Ends - Dinghy's & Small Keel Boats

Self-Latching SS End for 1" OD Pole: RF 600:
Self-Latching Piston End allows for easy single-handed attachment by pressing against Ring or Guy. Unit is made of chrome plated cast bronze with Stainless Steel straps. Fits 1" (minimum) diameter poles, flexible straps allow use with larger poles tapered to 1". Unit is 6 1/8" long, projects approximately 2 1/4" beyond pole end and is attached to pole with (6) 3/16" (#10) screws or (3) bolts.

 

 

 

Self-Latching SS End for 1 1/4" OD Pole: RF 677:
Self-Latching Piston End allows for easy single-handed attachment by pressing against Ring or Guy. Unit is made of chrome plated cast bronze with Stainless Steel straps. Fits 1 1/4" (minimum) diameter poles, flexible straps allow use with larger poles tapered to 1 1/4". Unit is 6" long, projects approximately 2 1/4" beyond pole end and is attached to pole with (6) 3/16" (#10) screws or (3) bolts.

 

 

 

Self-Latching SS End for 1 1/2" OD Pole: RF 601:
Self-Latching Piston End allows for easy single-handed attachment by pressing against Ring or Guy. Unit is made of chrome plated cast bronze with Stainless Steel straps. Fits 1 1/2" (minimum) diameter poles, flexible straps allow use with larger poles tapered to 1 1/2". Unit is 6" long, projects approximately 2 1/4" beyond pole end and is attached to pole with (6) 3/16" (#10) screws or (3) bolts.

~ Back to Spinnaker Poles Main Page ~

~ Back to Spars Main Page ~

~ Home ~