 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Z-SPAR Mainsail Gates & Luff Feeder |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Z-SPAR Mainsail Gates & Luff Feeder |
|
|
|
|
|
Mainsail Gate - Small: Z-1756: Cast Aluminum mainsail Gate Assembly fits Z-Spar mast sections Z-501 and smaller, that use flat mainsail slides. Gate measures (maximum) 2 13/16" high x 1 3/8" wide. Fastens with either (2) 3/16" rivets, or (2) 6mm screws, or some combination thereof. All fastener variations are included.
|
 |
|
|
Mainsail Gate - Large: Z-1755: Stainless Steel mainsail Gate Assembly fits Z-Spar mast sections Z-601 and larger, that use flat mainsail slides. Gate measures (maximum) 2 13/16" high x 1 3/8" wide, SS version replaces original Cast Aluminum Gate. Fastens with either (2) 3/16" rivets, or (2) 6mm screws, or some combination thereof. All fastener variations are included.
|
||
|
|
||
|
Pivoting Mainsail Gate - Small: Z-MGH-1:
Small pivoting mainsail Gate used on some Z-Spar mast sections. Plastic Gate measures (maximum) 58mm (2 1/4") high x 18mm (11/16") wide. Round Base (that fits into Mast groove) is 16mm (5/8") OD. Pivots on 5mm (3/16") rivet or screw in mast track.
|
|
|
|
Pivoting Mainsail Gate - Large: Z-MGH-2:
Large pivoting mainsail Gate used on some Z-Spar mast sections. Plastic Gate measures (maximum) 87mm (3 7/16") high x 27mm (1 1/16") wide. Round Base (that fits into Mast groove) is 24mm (15/16") OD. Pivots on 5mm (3/16") rivet or screw in mast track.
|
|
|
|
|
||
|
Mainsail Slide Stop - Small: Z-MGSS-1:
Small Plastic mainsail Gate Slide Stop Assembly fits Z-Spar mast sections Z-301 thru Z-701, and some others that use 5/8" flat mainsail slides. Sliding Stop includes 5mm Thumbscrew which locks into hole drilled at the top of the Gate cut-out. Slide Stop is 3 3/8" (85mm) long x 5/8" (16mm) wide.
|
||
|
Mainsail Slide Stop - Large: Z-MGSS-2:
Large Plastic mainsail Gate Slide Stop Assembly fits Z-Spar mast sections Z-901 and larger, and some others that use 15/16" flat mainsail slides. Sliding Stop includes 5mm Thumbscrew which locks into hole drilled at the top of the Gate cut-out. Slide Stop is 3 3/8" (85mm) long x 1" (25mm) wide.
|
|
|
|
Thumbscrew for Mainsail Slide Stop: Z-MGSS-TS:
5mm SS Thumbscrew as used in Z-Spar mainsail Gate Slide Stops, above, is available separately.
|
||
|
|
||
|
Mainsail Luff Feeder: Z-3085:
Gray plastic mainsail feeder entrance is used on all Z-Spar mast sections that use a boltrope luff. Unit is 80mm high x (maximum) 45mm wide and fastens with (4) 3/16" rivets or screws. Fasteners are on 65mm (2 9/16") vertical x 30mm (1 1/8") (lower) x 23mm (7/8") upper hole centers.
|
|
|
|
Mainsail Foot Feeder: Z-1711:
Gray plastic mainsail Foot feeder (for boltrope) mounts in recess in Z-Spar Boom gooseneck castings. Though actually a Boom part, (not a Luff Feeder), this item is listed here for your convenience. |
|
|
~ Home ~
