Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Z-Spar Hinged Mast Steps


Z-Spar has produced an incredible variety of cast aluminum Standard and Tabernacle (hinged) Mast Steps. Most Hinged (Tabernacle) Mast Steps are listed below, for Standard (non-hinging) Mast Steps, See, Z-Spar Standard Mast Steps. If you require a Hinged Mast Step not listed below, please specify Mast Section and Mast Step description when inquiring.
New-Style Hinged Tabernacle Deck Plates & Mast Feet
Old-Style Hinged Tabernacle Deck Plates & Mast Feet
Standard (non-Hinged) Mast Steps

New-Style Tabernacle Deck Plates and Mast Feet
Deck Plate for Tabernacle Mast Step w/ 1/4" Pin: Z-1100A:
Cast aluminum Deck Plate for use with Tabernacle Mast Foot on Z145, Z170, and Z190 Mast Sections. Features holes on each side for use with Z-250 turning blocks. Mast Foot hinges on 6mm pin (Z-1719), included, which goes through holes on aft side of Deck Plate. Deck Plate measures 4 7/8" (124mm) long, by 4 1/4" (108mm) wide and fastens to deck with (4) 1/4" (6mm) FH screws.

 

Z-1100

 

 

Tabernacle Hinge Pin – 6mm (1/4"): Z-1719:

SS Hinge Pin for use with Z-1100 Deck Plate. Pin is 6mm (1/4") diameter with a 95mm Grip length.

 

Z-1719

 

 

Vang Toggle for Tabernackle Deck Plate: Z-561:

Special SS Vang Toggle slides over Mast Step Hinge Pin in Z-1100 & Z-1101 Tabernackle Deck Plates. Formed Toggle with welded post will fit over 6mm & 8mm Hinge Pins and is 1 1/16" (27mm) wide to fit between Mast Step casting ears. Toggle has 6mm hole for attachment of shackle Pin, ears spread to 3/8" (10mm) wide to better support Shackle. Use with any 6mm Pin Shackle, or use Heavy-duty 6mm Screw Pin Bow Shackle: Z-561S:

 

 

 

Spacer for Z-1100 Deck Plate: Z-1100SP:

Special high-density Spacer for use with Z-1100 Deck Plate. Plastic Spacer fits under Deck Plate, raising it 1 1/2" to make up for height lost when switching from Old-style Mast Foot with Sheaves, below. Spacer is drilled to match holes in Z-1100 Deck Plate.

 

 

Tabernacle Mast Foot for Z145: Z-1397:

Cast aluminum Mast Foot for Z145 section hinges on 6mm pin (Z-1719) which goes through holes on aft side of Z-1100 Deck Plate. Unit may be labeled 1397.

 

Tabernacle Mast Foot for Z170: Z-1095:

Cast aluminum Mast Foot for Z170 section hinges on 6mm (1/4") pin (Z-1719) which goes through holes on aft side of Z-1100 Deck Plate. Unit may be labeled 1011 and/or 1095.

 

Z-1095

Tabernacle Mast Foot for Z190 - Small: Z-1096:

Small Cast aluminum Mast Foot for Z190 section hinges on 6mm (1/4") pin (Z-1719) which goes through holes on aft side of Z-1100 Deck Plate. Unit is (maximum) 5" (127mm) long x 3 1/4" (82mm) wide. Unit may be labeled 1012 and/or 1096.

 


Deck Plate for Tabernacle Mast Step w/ 8mm, 5/16" Pin: Z-1101A:
Cast aluminum Deck Plate for use with Tabernacle Mast Foot on Z190, Z230 and Z265 Mast Sections. Features holes on each side for use with Z-261, Z-272 and Z-300 turning blocks, or Z-300SA Block Studs. Mast Foot hinges on 8mm (5/16") pin (Z-1316), included, which goes through holes on aft side of Deck Plate. Deck Plate measures 6" (152mm) long, by 5 1/8" (130mm) wide and fastens to deck with (4) 1/4" (6mm) FH screws.

 

Z-1101
 

 

Tabernacle Hinge Pin – 8mm (5/16"): Z-1316:

SS Hinge Pin for use with Z-1101 Deck Plate. Pin is 8mm (5/16") diameter with a 103mm Grip length.

 

Z-1316

 

 

Vang Toggle for Tabernackle Deck Plate: Z-561:

Special SS Vang Toggle slides over Mast Step Hinge Pin in Z-1100 & Z-1101 Tabernackle Deck Plates. Formed Toggle with welded post will fit over 6mm & 8mm Hinge Pins and is 1 1/16" (27mm) wide to fit between Mast Step casting ears. Toggle has 6mm hole for attachment of shackle Pin, ears spread to 3/8" (10mm) wide to better support Shackle. Use with any 6mm Pin Shackle, or use Heavy-duty 6mm Screw Pin Bow Shackle: Z-561S:

 

Tabernacle Mast Foot for Z190 - Large: Z-1171:

Large cast aluminum Mast Foot for Z190 section hinges on 8mm (5/16") pin (Z-1316) which goes through holes on aft side of Z-1101 Deck Plate. Unit is (maximum) 5 1/4" (134mm) long x 3 1/4" (82mm) wide. Unit may be labeled 1012 and/or 1171.

 

Tabernacle Mast Foot for Z230: Z-1097:

Cast aluminum Mast Foot for Z230 section hinges on 8mm (5/16") pin (Z-1316) which goes through holes on aft side of Z-1101 Deck Plate. Unit may be labeled 1014 and/or 1097.

 

Tabernacle Mast Foot for Z230E: Z-4001:

Cast aluminum Mast Foot for Z230E furling mast section hinges on 8mm (5/16") pin (Z-1316) which goes through holes on aft side of Z-1101 Deck Plate. Unit may be labeled 4001.

 

Z-4001
Tabernacle Mast Foot for Z265: Z-1098:

Cast aluminum Mast Foot for Z265 section hinges on 8mm (5/16") pin (Z-1316) which goes through holes on aft side of Z-1101 Deck Plate. Unit may be labeled 1015 and/or 1098.

 


Old-Style Tabernacle Deck Plates and Mast Feet w/ Sheaves
Old-Style Mast Feet with integral sheaves have been obsoleted. Some sizes and angles are available on a limited basis.
 
Old-Style Deck Plate for Z145 - Z190 Mast Foot w/ Sheaves: Z-1112:
Aluminum Deck Plate fits Z145, Z170, and Z190 Mast Feet with Sheaves. Cast Plate measures 97mm (3 13/16") long (on deck) x 60mm (2 5/16") wide, with vertical rib, and slot on aft side for 6mm pin. Attaches to deck with (4) 6mm (1/4") FH screws on 32mm (1 1/4") x 79mm (3 1/8") centers.

 

Z-1112
Z-145SF-10/245
Mast Foot w/ Sheaves for Z145: Z-145SF-20:
Mast Foot w/ Sheaves for Z145: Z-145SF-30:
Mast Foot w/ Sheaves for Z145: Z-145SF-210:
Mast Foot w/ Sheaves for Z145: Z-145SF-10/245:
Mast Foot w/ Sheaves for Z145: Z-145SF-10/290:
Old-Style small Cast Aluminum Mast Foot with Sheaves for Z145 Mast and Z-1112 Deck Plate. Used with up to six (6) 28mm Sheaves, Z-1614, and 6mm knurled axle Pins in a variety of lengths. These Mast Feet are no longer available, See: Mast Foot Replacement Kit for Z145.

 

Mast Foot w/ Sheaves for Z170: Z-170SF-30:
Old-Style small Cast Aluminum Mast Foot with Sheaves for Z170 Mast and Z-1112 Deck Plate. Used with up to six (6) 28mm Sheaves, Z-1614, and 6mm knurled axle Pins in a variety of lengths. This Mast Foot is no longer available, See: Mast Foot Replacement Kit for Z170.

 

Mast Foot w/ Sheaves for Z190: Z-190SF-30:
Mast Foot w/ Sheaves for Z190: Z-190SF-210:
Mast Foot w/ Sheaves for Z190: Z-190SF-10/245:
Mast Foot w/ Sheaves for Z190: Z-190SF-10/260:
Old-Style small Cast Aluminum Mast Foot with Sheaves for Z190 Mast and Z-1112 Deck Plate. Used with up to six (6) 28mm Sheaves, Z-1614, and 6mm knurled axle Pins in a variety of lengths. These Mast Feet are no longer available, See: Mast Foot Replacement Kit for Z190.

 

 

 

Axle Pin, Knurled 6mm x18mm, <3/4" long: Z-1259:

Axle Pin, Knurled 6mm x35, 1 3/8" long: Z-1275X:

Axle Pin, Knurled 6mm x47, 1 7/8" long: Z-1267X:

Axle Pin, Knurled 6mm x54, 2 1/8" long: Z-1274:

Axle Pin, Knurled 6mm x66, 2 5/8" long: Z-1274-66:

Knurled SS Axle Pins used for Sheaves in a variety of Mast Steps and in other applications.

 

Mast Foot Replacement Kit for Z145: Z-145SF-SKit:

Mast Foot Replacement Kit for Z170: Z-170SF-SKit:

Mast Foot Replacement Kit for Z190: Z-190SF-SKit:

Replacement Kit for Old-Style small Mast Feet includes Z-1100A Deck Plate, above, with special high-density Spacer, Z-1100SP, and the proper size Mast Foot and rivets to go with it. This arrangement eliminates the need to shorten rigging required with the New-Style Tabernacle alone, while maintaining Boom height. Conversion requires a separate Exit Plate, Z-3273, for halyards cleated on the Mast. For each halyard that was led through the Old-Style Mast Foot to the deck, an Exit Plate, Z-3273, and a Turning Block, Z-250 will be required (order separately). Attaches to deck with (4) 6mm (6mm) FH screws using original hole spacing. To order, specify Mast Section.
Z-145SF-SKit: As used on O'Day 192, and others.
Z-170SF-SKit: As used on Hunter 25; Jeanneau 6.5M, 20, SO 24.1.
Z-190SF-SKit: As used on O'Day 222; Seaward 22, 24, 25.

 

 

Old-Style Deck Plate for Z230, Z260 Mast Foot w/ Sheaves: Z-1112L:
Aluminum Deck Plate fits Z230 and Z260 Mast Feet with Sheaves. Cast Plate measures 138mm (5 7/16") long x 78mm (3 1/16") wide, with vertical rib and horizontal SS 8mm pin. Attaches to deck with (4) 6mm (1/4") FH screws.

 

Z-1112L
Mast Foot w/ Sheaves for Z230: Z-230SF-10/270:
Old-Style large Cast Aluminum Mast Foot with Sheaves for Z230 Mast and Z-1112L Deck Plate. Used with up to six (6) 45mm Sheaves, Z-1616, and 8mm knurled axle Pins in a variety of lengths. This Mast Foot is no longer available, See: Mast Foot Replacement Kit for Z230.

 

Mast Foot Replacement Kit for Z230: Z-230SF-SKit:
Replacement Kit for Old-Style Z230 Mast Feet includes Z-1101A Deck Plate, above, with special high-density Spacer, and the Mast Foot, Z-1097, and rivets to go with it. This arrangement eliminates the need to shorten rigging required with the New-Style Tabernacle alone, while maintaining Boom height. Conversion requires a separate Exit Plate, Z-3273, or Z-3272, for halyards cleated on the Mast. For each halyard that was led through the Old-Style Mast Foot to the deck, an Exit Plate and a Turning Block, Z-261, Z-272, or Z-300, or Z-300SA Block Stud will be required (order separately). Attaches to deck with (4) 6mm (1/4") FH screws, New Deck holes will have to be drilled.

 

 
Mast Foot w/ Sheaves for Z260: Z-260SF-30:
Mast Foot w/ Sheaves for Z260: Z-260SF-10/230:
Mast Foot w/ Sheaves for Z260: Z-260SF-10/260:
Cast Aluminum Mast Foot with Sheaves for Z260 Mast and Z-1112L Deck Plate. Used with up to six (6) 45mm Sheaves, Z-1616, and 8mm knurled axle Pins in a variety of lengths. These Mast Feet are no longer available, and are shown here for identification only.

 

Z-260SF-10/230

Old-Style Deck Plate for Z260 Mast Foot w/ Sheaves: Z-1175X:
Aluminum Deck Plate to fit old-style Z260 and other Mast Feet with Sheaves. Cast Plate measures 160mm (6 5/16") long x 120mm (4 3/4") wide x 22mm (7/8") thick, with fore and aft slot to accept rib in mast foot, and slot in aft side for 6mm hinge pin. Attaches to deck with up to (8) 6mm (1/4") FH screws. As used on early Hunter 26.5, O'Day 272, and others. *

 

Z-1175
Mast Foot w/ Sheaves for Z260: Z-260SF-10/2P:
Cast Aluminum Mast Foot with Sheaves for Z260 Mast and Z-1175X Deck Plate. Used with up to six (6) 45mm Sheaves, Z-1616, and 8mm knurled axle Pins in a variety of lengths. As used on early Hunter 26.5, O'Day 272, and others. This Mast Foot is no longer available, and is shown here for identification only.

 

 

 

Mast Step Sheave, 45mm OD (1 3/4"): Z-1616:

Sheave used in Z-260SF-10/2P Mast Foot and a variety of other applications. Nylon Sheave is 45mm (1 3/4") x 13mm wide x 8mm ID.

 

 

 

Axle Pin, Knurled 8x29mm, 1 1/8" long: Z-1273:

Axle Pin, Knurled 8x45mm, 1 3/4" long: Z-1272X:

Axle Pin, Knurled 8mm x50, 2" long: Z-1272-50:

Axle Pin, Knurled 8mm x58, 2 1/4" long: Z-1272-58:

Axle Pin, Knurled 8mm x62, 2 7/16" long: Z-1268X:

Axle Pin, Knurled 8mm x73, 2 7/8" long: Z-1303:

Axle Pin, Knurled 8mm x85, 3 3/8" long: Z-1289:

Axle Pin, Knurled 8mm x96, 3 3/4" long: Z-5811:

Knurled SS Axle Pins used for Sheaves in a variety of Mast Steps and in other applications.

 

 

 

Axle Pin, Knurled 5x31mm, 1 1/4" long: Z-1281X:

Axle Pin, Knurled 5mm x48, 1 7/8" long: Z-1284X:

Axle Pin, Knurled 10mm x52, 2" long: Z-5837:

Axle Pin, Knurled 10mm x57, 2 1/4" long: Z-1287X:

Axle Pin, Knurled 14mm x60, 2 3/8" long: Z-111:

Knurled SS Axle Pins used for Sheaves and Axles in a variety of applications.

 

~ Back to Z-Spar Masts ~

~ Back to Z-Spar Main Page ~

~ Home ~