 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Z-Spar Vang Toggles |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Z-Spar Vang Toggles |
|
|
|
|
| Z-Spar uses a variety of cast aluminum Vang Toggles that are
designed for use with their standard Gooseneck Brackets,
See Z-Spar Gooseneck and Vang Brackets.
To order a Vang Toggle not listed below please specify Mast Section, and Toggle or Bracket dimensions
when inquiring. |
|
|
||
|
Vang Toggle for Tabernackle Deck Plate: Z-561:
Special SS Vang Toggle slides over Mast Step Hinge Pin in Z-1100 & Z-1101 Tabernackle Deck Plates. Formed Toggle with welded post will fit over 6mm & 8mm Hinge Pins and is 1 1/16" (27mm) wide to fit between Mast Step casting ears. Toggle has 6mm hole for attachment of shackle Pin, ears spread to 3/8" (10mm) wide to better support Shackle. Use with any 6mm Pin Shackle, or use Heavy-duty 6mm Screw Pin Bow Shackle : Z-561S:
|
|
|
|
Vang Toggle for 8mm Vertical & Horizontal Pins: Z-560:
Cast aluminum vang toggle rides on an 8mm vertical pin. Features 8mm horizontal hole in 1/4" (6mm) thick tab. Toggle measures 2 3/16" (55mm) vertical x 2" (50mm) horizontally (max.). Used on Mast Sections up to Z331. For use with Z-Spar Small, and other solid Vangs.
|
|
|
|
Vang Toggle for 8mm Vertical, 10mm Horizontal Pin: Z-4066:
Cast aluminum vang toggle rides on an 8mm vertical pin. Features 10mm horizontal hole in 1/2" (13mm) thick boss. Toggle measures 2 3/16" (55mm) vertical x 2" (50mm) horizontally (max.). Heavier version of Z-560, above, for use with Z-Spar Medium, and other solid Vangs. Used on Mast Sections up to Z351.
|
|
|
|
|
Vang Bracket Ass'y w/ Toggle for 10mm Pin: Z-4066VBA:
Cast aluminum Vang Bracket Assembly with toggle is used on Z145 and larger mast sections up to Z351. Toggle, Z-4066, features 10mm horizontal hole in 1/2" (13mm) thick boss, Bracket, Z-1478C, measures 3 1/2" (88mm) high x 2 1/8" (54mm) wide and fastens to mast with (8) 1/4" (6mm) rivets. For use with Z-Spar Medium, and other solid Vangs.
|
|
|
|
||
|
Vang Toggle for 12mm Vertical Pin: Z-1195:
Cast aluminum vang toggle rides on a 12mm vertical pin. Features 10mm hole in 1/2" (13mm) thick boss and additional hole for Vang Tackle. Toggle measures 2 3/4" (68mm) vertical x 2 5/8" (66mm) horizontally (max). For use with Z-Spar Medium, and other solid Vangs.
|
|
|
|
Vang Toggle for 12mm Vertical Pin: Z-4938:
Cast aluminum vang toggle rides on a 12mm vertical pin. Features 12mm hole in 1 1/16" (28mm) thick boss and additional hole for Vang Tackle. Toggle measures 2 3/4" (68mm) vertical x 2 5/8" (66mm) horizontally (max). For use with Z-Spar Large, and other solid Vangs.
|
|
|
|
|
||
|
Vang Toggle for 14mm Vertical, 12mm Horizontal Pin: Z-1178:
Cast aluminum vang toggle rides on a 14mm vertical pin, and is 1 1/16" (28mm) wide with a 12mm horizontal hole for Vang attachment. Toggle measures 3 1/8" (80mm) vertical x 2 1/2" (63mm) (max) long. For use with Z-Spar Large, and other solid Vangs. Unit is marked 1178.
|
|
|
| Vang Toggle for 14mm Vertical, 12mm Horizontal Pin: Z-1178N: | ||
| Cast aluminum vang toggle rides on a 14mm vertical pin, and is 1 1/16" (28mm) wide with a 12mm horizontal hole for Vang attachment and (2) 10mm holes (above and below) for attachment of Vang tackle. Toggle measures 3 1/8" (80mm) vertical x 2 1/2" (63mm) (max) long. For use with Z-Spar Large, and other solid Vangs. Unit is marked 1178. |
|
|
~ Home ~
