 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Kenyon Sheave Axle Pins with Tab |
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Kenyon Sheave Axle Pins with Tab |
|
| Sheave Axle Pins with Tab Kenyon SS Sheave Axle Pins with Tabs are used in masts with welded-in mastheads and sheave boxes. Pins are welded to SS Tabs, which are screwed to the mast and allow for easy removal. Most Sheave Axle Pins have a thin stem where they are welded to the tab, which allows the tab to be bent to fit the mast contour where it attaches to mast. Listed below are standard sizes, but others are available. |
|
| 1/4" Sheave Axle Pins Kenyon 1/4" Sheave Axle Pins are welded to a round tab which attaches to mast with (2) #10 (3/16") screws. Round tab is 1 1/8" diameter with 2 holes on 3/4" centers. |
|
| 1/4" Sheave Axle Pin: K-1297-1X: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Pin is 1/4" diameter, unit is (maximum) 1 1/2" long.
|
 |
| 1/4" Sheave Axle Pin: K-1297-3X: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Axle Pin is 1/4" diameter, unit is (maximum) 1 3/4" long. As used on J/24 for main halyard sheave, and on E-22 for spinnaker halyard sheave. d
|
|
| 1/4" Sheave Axle Pin: K-1297-4: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Axle Pin is 1/4" diameter, unit is (maximum) 2 1/2" long. As used on E-22, and some J/24's for spinnaker halyard sheave.
|
|
| 1/4" Sheave Axle Pin: K-1297-5: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Axle Pin is 1/4" diameter, unit is (maximum) 2" long. As used on some J/24's for jib halyard sheave.
|
|
| 1/4" Sheave Axle Pin: K-1297-6X: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Axle Pin is 1/4" diameter, unit is (maximum) 2 7/8" long. As used on J/24's with old-style double spinnaker halyard box.
|
|
| 1/4" Sheave Axle Pin: K-1297-7X: SS Sheave Axle Pin has thin stem welded to round tab which attaches to mast with (2) #10 (3/16") screws. Axle Pin is 1/4" diameter, unit is (maximum) 2 1/4" long. As used on some J/24's for jib halyard sheave.
|
|
| 5/16" Sheave Axle Pins | |
| 5/16" Sheave Axle Pin: K-10680-9S: SS Sheave Axle Pin is welded to a thin tab which attaches to mast with (1) #10 (3/16") screw. Tab is 1 3/8" overall x 7/16" wide. Axle Pin is 5/16" diameter, unit is (maximum) 2 3/4" long.
|
|
| 3/8" Sheave Axle Pins Kenyon 3/8" Sheave Axle Pins bendable are welded to a teardrop shaped tab, which attaches to mast with (1) #10 (3/16") screw. Teardrop Tab is 2 1/8" overall x 1 1/4" wide. Screw hole is 1 1/4" from axle center. |
|
| 3/8" Sheave Axle Pin: K-10680: SS Sheave Axle Pin has a thin bendable stem welded to teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 3/8" diameter, unit is (maximum) 3" long.
|
|
| 3/8" Sheave Axle Pin: K-10680-1: SS Sheave Axle Pin has thin bendable stem welded to teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 3/8" diameter, unit is (maximum) 2 1/2" long.
|
|
| 3/8" Sheave Axle Pin: K-10680-2: SS Sheave Axle Pin has thin bendable stem welded to teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 3/8" diameter, unit is (maximum) 3 1/2" long.
|
|
| 7/16" Sheave Axle Pins | |
| 7/16" Sheave Axle Pin: K-11659: SS Sheave Axle Pin has thin stem welded to teardrop shaped tab which attaches to mast with (1) #10 (3/16") screw. Tab is 2 1/8" overall x 1 1/4" wide. Axle Pin is 7/16" diameter, unit is (maximum) 2 1/4" long. As used on some Soverel 33's, and others.
|
|
| 1/2" Sheave Axle Pins Most Kenyon 1/2" Sheave Axle Pins are welded to a teardrop shaped tab, which attaches to mast with (1) #10 (3/16") screw. Teardrop Tab is 2 1/8" overall x 1 1/4" wide, screw hole is 1 1/4" from axle center. |
|
| 1/2" Mast Base Sheave Axle Pin: K-11669: SS Mast Base Sheave Axle Pin is welded at 90 degrees to tab which attaches to mast exit block and other flat surfaces with (1) #10 screw. Axle Pin is 1/2" diameter, unit is (maximum) 2 1/8" long, Oval tab measures 1" x 1 1/2". Used in Masts with welded-in deck-level exit blocks. As used on Hunter 34 and others.
|
|
| 1/2" Sheave Axle Pin: K-11129-1: SS Sheave Axle Pin has thin bendable stem welded to teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 1/2" diameter, unit is (maximum) 3" long.
|
|
| 1/2" Sheave Axle Pin: K-11129-2: SS Sheave Axle Pin has thin bendable stem welded to teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 1/2" diameter, unit is (maximum) 3 1/2" long.
|
|
| 1/2" Sheave Axle Pin: K-11129-3: SS Sheave Axle Pin has thin bendable stem welded to teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 1/2" diameter, unit is (maximum) 3 3/4" long.
|
|
| 1/2" Sheave Axle Pin: K-11129-4: SS Sheave Axle Pin has thin bendable stem welded to teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 1/2" diameter, unit is (maximum) 4 1/2" long.
|
|
| 1/2" Sheave Axle Pin: K-11129-5: SS Sheave Axle Pin has thin bendable stem welded to teardrop tab which attaches to mast with (1) #10 (3/16") screw. Axle Pin is 1/2" diameter, unit is (maximum) 5 3/4" long. |
|
