 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
FranceSpar Spreader Tips |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
FranceSpar Spreader Tips |
|
|
|
|
| The most common FranceSpar Spreader Tips were made in black
plastic, and were commonly used on spreaders with hinged spreader bases. In this
application the Spreader Tips must be clamped to the shroud(s) with a SS L-bolt assembly,
prior to installation in the spreader tube. With this design spreader tips must be
positioned carefully, and adjusted as the shrouds stretch, to bisect the angle of the
shroud at the Spreader Tip. See also: Isomat Spreaders. |
|
|
|
Spreader Tip for FSP 74 & 74T Spreaders: FSP 75:
Black plastic Spreader Tip uses 6mm L-bolt with locknut, FSP 75BA (order separately) to clamp up to 3/16" (5mm) shroud to the Spreader Tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. Tip measures (maximum) 2 1/4" fore & aft x >11/16" thick (58mm x 18mm). FSP 74 Spreader Section is (maximum) 55 x 20mm (2 1/4") OD with a 48 x 15mm (1 15/16" x 9/16") ID. FSP 74T Spreader Section is as FSP 74, but features an integral 'tail', so that the Spreaders can be tapered at the outboard end without welding. FSP 74T is (maximum) 85 x 20mm (3 5/16" x 3/4") OD with a 48 x 15mm (1 15/16" x 9/16") ID.
|
|
|
| L-bolt w/ Locknut for FSP 75 Spreader Tip: FSP 75BA:
SS L-bolt is 6mm x 2 1/2" long with 1/2" leg. For use with FSP 75 Spreader Tip. Includes 6mm SS Locknut.
|
||
|
Spreader Tip for FSP 174 Spreader: FSP 175:
Black plastic Spreader Tip uses 6mm L-bolt with locknut, FSP 175BA (order separately) to clamp up to 5/16" (8mm) shrouds to the Spreader Tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. Tip measures (maximum) 2 13/16" fore & aft x <1" thick (72mm x 24.5mm). FSP 174T Spreader Section features an integral 'tail', so that the Spreaders can be tapered at the outboard end without welding. FSP 174T is (maximum) x 24mm (" x 15/16") OD with a 56 x 19mm (2 1/4" x 3/4") ID.
|
|
|
| L-bolt w/ Locknut for FSP 175 Spreader Tip: FSP 175BA:
SS L-bolt is 6mm x 2 1/2" long with 3/4" leg. For use with FSP-175 Spreader Tip. Includes 6mm SS Locknut.
|
||
|
Spreader Tip for FSP 214 Spreader: FSP 215:
Black plastic Spreader Tip uses 8mm L-bolt with locknut, FSP 215BA (order separately) to clamp up to 3/8" (10mm) shrouds to the Spreader Tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. Tip measures (maximum) 3 3/8" fore & aft x 1 1/8" thick (85mm x 29mm). Original molded version is shown, they are now individually machined from solid black Delrin. FSP 214T Spreader Section features an integral 'tail', so that the Spreaders can be tapered at the outboard end without welding. FSP 214T is (maximum) 120 x 28mm (4 3/4" x 1 1/8") OD with a 70 x 22mm (2 3/4" x 7/8") ID.
|
|
|
| L-bolt w/ Locknut for FSP 215 Spreader Tip: FSP 215BA:
SS L-bolt is 8mm x 2 1/2" long with 3/4" leg. For use with FSP-215 Spreader Tip. Includes 8mm SS Locknut. Special Order item. |
||
~ Back to FranceSpar Main Page
~ Home ~