Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
 Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Kenyon Spars 1 1/4" Boom Section
Kenyon Spars 1 1/4" Round Boom Section
Measurements: 1 1/4" OD (32mm)
Wall Thickness: .065"
Weight/ft.: .285 lbs.
Moments of inertia: Ixx = ."
Circumference: 3 7/8"
Alloy: 6063-T6
Sail slides: none
Standard Tube Lengths: 6', 8', 12', 20'

round_tube.TIF (16698 bytes)

Common Boom usage: Chris Craft Dingy; Escort; Gull; Glen L II; Hunter Dingy; MFG Whistler; O'Day Sprite; Petty Dink; Ranger 11; Sailstar Little Bear; Sea Dog; Snapir OD11; Sprite Quest; Tern; Turnabout; Tadpole; Yankee Dinghy; and hundreds of other dinghies.
Kenyon 1 1/4" Boom Tube

1 1/4" Round Boom Tube - Clear Anodized: K-RTA1.25B-___:
Kenyon 1 1/4" Round Boom Tube is stocked in a variety of lengths (listed above) fully anodized, it can also be cut to shorter lengths. To order, specify length.
If you require a complete Boom Assembly, you can select from components below and contact us with specifications.
 
Kenyon 1 1/4" Boom Hardware
Listed below are parts specific to the Kenyon 1 1/4" Round Boom. For more generic parts, see categories listed under Kenyon Spar Parts. There are many parts for specific configurations that are not listed here. If you require 1 1/4" Round Boom Components not listed here please contact us with details.
1 1/4" Boom - Gooseneck Assemblies & Parts
1 1/4" Gooseneck Assembly w/ Tack Pin & 3/8" Boltrope Slide: K-1.2B3-781S:
Cast aluminum boom end fitting includes captive SS tack pin and attached SS Gooseneck Slide. Gooseneck Slide fits smaller Mast Sections including A, C-1, C-6, 2331, MORC and other mast sections that can accommodate only 3/8" round slugs or boltrope. Slide is 2 1/2" long and has welded SS ring for downhaul attachment.

 
1 1/4" Gooseneck Ass'y w/ Tack Pin & 1/2" Boltrope Slide: K-1.2B3-781L:
Cast aluminum boom end fitting includes captive SS tack pin and attached SS Gooseneck Slide. Gooseneck Slide fits most Mast Sections including Kenyon B, D, E, 3049, 3650 and all mast sections that accept 1/2" round slugs or boltrope. Slide is 2 1/2" long and has welded SS ring for downhaul attachment.

 
1 1/4" Gooseneck Ass'y w/ Tack Hook & 3/8" Boltrope Slide: K-1.2B3-266:
Cast aluminum boom Cap includes SS Gooseneck Slide with captive Tack Hook and hole for downhaul attachment. Gooseneck Slide fits smaller Mast Sections including A, C-1, C-6, 2331, MORC and other mast sections that can accommodate only 3/8" round slugs or boltrope. Slide is 2 1/2" long and has welded SS tab for downhaul attachment.

 
1 1/4" Gooseneck Ass'y w/ Slide for 5/8" Sailtrack: K-1.2B3-268:

Cast aluminum boom Cap includes SS Gooseneck Slide for 5/8" Sailtrack. Gooseneck Slide features captive Thumbscrew to lock it in place on 5/8" Sailtrack and welded SS ring for Tack attachment. Fits all Mast Sections with 5/8" Sailtrack and Kenyon O mast section (as used on Sea Dog and other dinghies). Slide is 3" long and has welded SS ring for downhaul attachment.

 
1 1/4" Gooseneck Casting w/ Tack Pin: K-9571CT:
Replacement casting only with Tack Pin as used in assemblies above, but without SS Gooseneck Slide.

 
1 1/4" Boom Cap: K-922C:
Replacement casting only with Tack Pin as used in assemblies above, but without SS Gooseneck Slide.

 
Gooseneck Slide Ass'y for 1/2" Boltrope: K-781L:
SS Gooseneck Slide for 1/2" boltrope groove with attached eye, as used in K-1.25B3-781L, above. Designed for attachment to gooseneck casting with Tack Pin, above.

 
Gooseneck Slide Ass'y for 3/8" Boltrope: K-781S:
SS Gooseneck Slide for 3/8" boltrope groove with attached eye, as used in K-1.25B3-781S, above. Designed for attachment to gooseneck casting with Tack Pin, above.

 
Gooseneck Slide Ass'y w/ Tack Hook for 1/2" Boltrope: K-266LH:
SS Gooseneck Slide for 1/2" boltrope groove has captive Tack Hook with attached eye, as used in K-1.25B3-266, above. Designed for use with 1 1/4" Boom Cap, above.

 
Gooseneck Slide Ass'y for 5/8" Sailtrack: K-268S:
SS Gooseneck Slide for 3/8" boltrope groove with attached eye, as used in K-1.25B3-268, above. Designed for use with 1 1/4" Boom Cap, above.

 
1 1/4" Boom - Outhaul Assembly
1 1/4" Boom Outhaul Casting: K-1.2B4:

Cast aluminum boom end fitting has integral eyes with holes for outhaul and mainsheet attachment. Unit protrudes 5/8" from tube end and is (maximum) 2 5/8" high.

 
1 1/4" Boom - Accessories
Eye Strap: K-226:

SS Eyestrap has narrow, well rounded waist suitable for direct attachment of any Bullet Block and is especially kind to line. Eyestrap is (maximum) 7/16" wide x 1/16" thick x 1 11/16" long. Fastens with (2) 3/16" (#10) fasteners on 1 1/4" centers.

 
Bullet Block w/ Delrin Sheave: RF 571:

SS Bullet Block has 1" OD Delrin sheave for line up to 1/4".

 
SS Bullet Block w/ Becket: RF 572:

SS Bullet Block with Becket has 1" OD Delrin sheave for line up to 1/4".

 
Spar Cleat - 3 1/4" long: K-1617:

Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with line up to 1/4" diameter. Black Epoxy Cleat is 3 1/4" long, and fastens to spar with (2) 5/32" (#8) FH screws on 13/16" centers.

~ Back to Kenyon Booms ~

~ Back to Kenyon Main Page ~

~ Home ~