 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
2333 Internal Gooseneck Assemblies |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
2333 Internal Gooseneck Assemblies |
|
|
|
|
| Kenyon 2333 Internal Gooseneck Assemblies and Parts |
| The Kenyon 2333 Internal Gooseneck Assembly allows
easy control of two internal lines. A variety of configurations are available to allow
internal Outhaul and Reefing lines to exit the gooseneck and be led back along boom, down to the
deck, or cleated at the gooseneck using lever action cams.
|
|
|
||
| 2333 Internal Gooseneck Assemblies | ||
|
2333 Internal Gooseneck Assembly w/ Toggle/Tack: K-11723A:
Cast aluminum gooseneck assembly incorporates provisions for internal outhaul and 1 internal reef line. Outhaul line exits on starboard bottom through delrin sheave, K-11726, and can run straight down to the deck, or back along boom bottom to a cleat. Reef line runs over delrin sheave, K-11726-1, past lever action cam, K-11246S, on port side, and down. Includes SS combination Toggle/Tack/Reef Hook Assembly K-10518A. Toggle attaches to any Kenyon gooseneck bracket designed for 1 1/2" toggle and 1/4" vertical pin. Vertical pin, CP4-61K, is not included. Distance from vertical Toggle Pin to boom tube is 4 1/2".
|
|
|
|
2333 Internal Gooseneck Assembly: K-11723:
Cast aluminum gooseneck assembly, as K-11723A, above, but without SS combination Toggle/Tack/Reef Hook Assembly, K-10518A. Distance from horizontal Pin hole to boom tube is 3 1/2".
|
|
|
|
2333 Internal Gooseneck Ass'y w/ 2 Cams: K-11723-2C:
Cast aluminum gooseneck assembly incorporates provisions for 2 internal lines with Lever Cams. Both lines runs over delrin sheaves, K-11726-1, past lever action cams, K-11246S&P, and down. For use with K-10518A or other Toggles up to 11/16" wide.
|
||
|
2333 Internal Gooseneck Ass'y without Cams: K-11723-2S:
As K-11723, above, but with 2 Sheaves (K-11726) and no reef cams. Both internal lines can run straight down to the deck, or back along boom bottom to a cleat, or one of each. For use with K-10518A or other Toggles up to 11/16" wide.
|
||
|
|
||
| 2333 Internal Gooseneck Parts | ||
|
Gooseneck Toggle/Tack w/ Reef Hooks: K-10518A:
Used with any Kenyon 2333 or "D" section internal gooseneck, this combination Toggle/Tack/Reef Hook Assembly features 3 tack positions and includes 3/8" tack fastpin, K-10399. Two 1/4" reef hooks allow for ease of reefing from either side of the boom. Takes 1/4" vertical pin and 3/8" horizontal pin. Toggle portion is 1 1/2" high x 11/16" wide with 1" between pin centers. Unit (excluding Reef Hooks) is 4" high x 11/16" wide x 2 1/4" long. Toggle attaches to any Kenyon Gooseneck Bracket or slide for 1 1/2" toggle with 1/4" Clevis Pin, CP4-61K, below (order separately).
|
|
|
|
Tack Fastpin for 1 1/2" Toggle: K-10399:
SS Fastpin is 3/8" diameter x 7/8" long. Used in all K-10518 1 1/2" Toggle/Tack/Reef Hook Assemblies.
|
||
|
Gooseneck Pin for 1 1/2" Toggle: CP4-61K:
Clevis pin is 1/4" diameter x 1 7/8" long. Used to attach K-10518 Toggle/Tack/Reef Hook Assemblies to any Kenyon Gooseneck Bracket or Slide for 1 1/2" Toggle and 1/4" Pin.
|
||
|
2333 Internal Gooseneck Casting Only: K-11549:
Finished Casting only as used in K-11723 Internal Gooseneck Assemblies, above.
|
||
|
Upper Sheave for 2333 Gooseneck Ass'y: K-11726-1: Delrin Sheave is 1" OD x 1/2" wide x 1/4" ID. As used in 2333 Internal Gooseneck Assemblies (upper Sheave), above.
|
||
|
Lower Sheave for 2333 Gooseneck Ass'y: K-11726:
Delrin Sheave is 1" OD x 1/2" wide x 3/8" ID. As used in 2333 Internal Gooseneck Assemblies (lower Sheave), above.
|
||
|
Upper Axle for 2333 Gooseneck Ass'y: K-11734:
SS knurled Sheave Axle pin is 1/4" diameter x 2 1/4" long. As used in 2333 Internal Outhaul Assembly (upper Axle), above.
|
||
|
Lower Axle for 2333 Gooseneck Ass'y: K-11735:
SS knurled Sheave Axle pin is 3/8" diameter x 1 1/2" long. As used in 2333 Internal Outhaul Assembly (lower Axle), above.
|
||
|
Reef Cam for D-Section Gooseneck - Port: K-11246P:
Reef Cam for D-Section Gooseneck - Starboard: K-11246S: Cast aluminum Cam lever fits on 3/8" bolt and has recesses for special friction-lock washers, K-10862 (2 included). Specify Port or Starboard.
|
 |
|
|
Friction-lock washers for Reef Cams: K-10862:
Special green-colored friction-lock washers made of an impregnated synthetic allow for precise adjustment of cam tension and protect cams from corrosion.
|
||
~ Home ~
