 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
D-Section Roller-Reefing Gooseneck Assemblies |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
D-Section Roller-Reefing Gooseneck Assemblies |
|
|
|
|
| D-Section Roller-Reefing Gooseneck Ass'y w/ 1/2" Slide: K-10553RR: | ||
|
Spring-loaded roller-reefing mechanism works by pulling aft on the boom and turning it in
1/4 turn increments. SS yoke assembly is fixed in a square recess until boom is pulled
aft. SS Spring locks yoke into recess when boom is released. Works only with end-boom
sheeting systems with swiveling mainsheet and topping lift attachments. Cast aluminum boom
end fitting includes captive SS tack pin and SS roller-reefing yoke assembly, K-8890A,
with 1" SS Toggle, K-1993, and 1/2" SS Gooseneck Slide, K-1685A.
Fits B, D, E, 3049, 3650 and all mast sections using 1/2" round slugs or boltrope.
|
|
|
| D-Section Roller-Reefing Gooseneck w/Toggle: K-2123RR: As K-10553RR, above, but without SS Gooseneck slide. Toggle attaches directly to any of the Kenyon gooseneck brackets designed for a 1" Toggle (see individual mast sections), and Kenyon gooseneck slides designed for a 1" Toggle.
|
 |
|
| D-Section Roller-Reefing Gooseneck Ass'y: K-2123RRNT: As K-2123RR, above, but without SS Gooseneck Toggle. Yoke attaches to a variety of Gooseneck Toggles up to 1" wide, but is normally used with Kenyon 1" SS Toggle, K-1993.
|
|
|
| D-Section Roller-Reefing Casting w/ Tack pin: K-D333AL: | ||
|
Black Epoxy coated Gooseneck casting with captive SS tack pin has 1/2" hole in 1 1/4"
square recess for attachment of K-8890A roller reefing yoke assembly for
1" toggle. Casting with tack pin only, as used in the assemblies listed above.
|
|
|
|
SS Gooseneck Slide - 1" for Large Boltrope: K-1685A:
SS Gooseneck slide fits any gooseneck assembly using the standard 1" toggle, K-1993, with a 1/4" bolt and locknut (included). Slide has heavy welded SS ring for downhaul attachment. Fits B, D, E, 3049, 3650 and all mast sections using 1/2" round slugs or boltrope.
|
|
|
|
SS Gooseneck Slide - 1" for Small Boltrope: K-10331A:
SS Gooseneck slide fits any gooseneck assembly using the standard 1" toggle, K-1993, with a 1/4" bolt and locknut (included). Slide has heavy welded SS ring for downhaul attachment. Fits A, C-1, C-6, 2331, MORC and other mast sections that can accommodate only 3/8" round slugs or boltrope.
|
|
|
|
SS Gooseneck Slide - 1" for 7/8" Flat Track: K-1686A:
SS Gooseneck slide fits any gooseneck assembly using the standard 1" toggle, K-1993, with a 1/4" bolt and locknut (included). Slide has heavy welded SS ring for downhaul attachment. Fits on a SS 7/8" x 1/8" Flat External Track.
|
|
|
| Gooseneck Slide & Toggle Ass'y for 3/4" Internal Flat Track: PP M6ATS: | ||
|
Aluminum Gooseneck Slide with 1 1/2" Toggle
to fit D-Section Gooseneck Assemblies with Tack and Yoke, K-2123RRNT,
above, and K-2123NT. Slide fits integral Track in Kenyon 3550,
3756, Rig-Rite, Pearson, Metalmast and most other Mast Sections with a 3/4" Internal
Flat Track. Gooseneck Slide is 4" long and features 5/16" hole for downhaul line
or shackle. Toggle is 3/4" wide and has 1/4" horizontal Pin hole. Includes nylon
spacer washers and SS bolt w/ locknut to attach to standard 1" SS Yokes.
|
||
|
SS Roller-reefing Yoke Assembly for 1" Toggle: K-8890A:
SS spring-loaded roller-reefing yoke assembly for use with boom end castings that have a 1/2" hole centered in a 1 1/4" square recess. Attaches to 1" SS Toggle, K-1993, with a 1/4" SS bolt and locknut (included). Post is 1/2" diameter x 3 1/2" long. Includes SS Spring, SS washers, and cotter pin.
|
|
|
|
SS Gooseneck Toggle - 1": K-1993:
SS Gooseneck Toggle attaches directly to any of the Kenyon gooseneck brackets or gooseneck slides designed for a 1" toggle, and to any boom end casting using the K-80, or K-8890 SS yoke assemblies. Toggle is 1" square x 1 1/8" long with 1/4" holes at 90 degrees to each other on 1/2" centers. |
|
|
~ Home ~
