Rig-Rite #7 Mast Section

RR #7 Mast Section The Rig-Rite #7 Mast Section is long out of production, but most replacement items are still available.

RR #7 Standard Mast Hardware Listed below are parts specific to the Rig-Rite #7 Mast Section. For more generic parts, see categories listed under Spar Parts. There are many parts for specific configurations that are not listed here. If you require Rig-Rite #7 Mast Components not listed here please contact us with details.

*Inset Masthead Ass'y w/ Spinnaker Bails: RR 7M-H4A-2S:* Deluxe bolt-in aluminum Masthead Assembly for RR #7 Mast Section incorporates (4) 2 1/2" OD aluminum sheaves, K-198-10A8, for internal or external rope halyards, and Masthead Strap with (2) 3/8" holes for Headstay and Backstay attachment, and Dual Offset Spinnaker Bails. Includes 1/4" Clevis Pin for topping lift attachment. Masthead fits in 3 3/4" deep x 1 5/8" wide slot cut into fore and aft sides of the mast tube. Masthead Assembly (excluding SS Masthead Strap) is 8 1/4" long x (maximum) 3 3/4" wide, and attaches to the mast with (1) 3/8" bolt.

#7 Gooseneck Bracket: RR 7M-GB4: SS Gooseneck Bracket for RR #7 Mast Section has 1/2" vertical Pin hole, for use with standard Gooseneck Toggle up to 2 1/2" high. Base is 4" vertical x approximately 2 7/8" wide, and attaches to the mast with (6) 1/4" RH fasteners. Commonly used with SS Reef Hook/Tack Assembly, RR 54-B8-4A, and cast Toggle, RR 45-67C, below. Can also be used as Vang Bracket with addition of an appropriate Vang Toggle.
	*Reef Hook/Tack Ass'y w/ 1/2" Bolt: RR 54-B8-4A:* Heavy-duty Stainless Steel Reef Hook/Tack Assembly incorporates 1/2" Vertical Gooseneck Bolt. Dual Reef Hooks are formed from 5/16" rod, Assembly is (maximum) 4 5/8" wide x 7" high, and includes 5/16" SS Tack Shackle. Bolt is 4 1/4" long for use with Gooseneck Brackets and slides with a 1/2" Vertical Pin hole and a maximum 3 1/2" bracket height. This item is also available on a custom basis with other bolt lengths, please specify. As used on a variety of Bristol's, Pearson's, and Sabre's.
	*SS Tack Shackle, 5/16" w/ Locking Pin: Wic 1204:* Stainless Steel Tack Shackle mounts on top of 1/2" Vertical Gooseneck Tack Bolt. Forged Shackle features a 5/16" self-locking Pin. Used on a variety of Kenyon, Rig-Rite, MetalMast and other 1/2" Tack Bolts.
	*Aluminum Gooseneck Toggle, 2 5/16" High: RR 45-67C:*
	Cast Aluminum Gooseneck Toggle is 2 5/16" high with holes for *1/2" vertical and* horizontal pins. Black epoxy coated Toggle is 2 5/16" high x 1 3/8" wide x 2 1/2" (maximum) long, pin holes are on 1 1/4" centers. Toggle fits a variety of Mast Brackets and Gooseneck Slides designed for a 2 5/16" Toggle with a 1/2" vertical pin. As used with Rig-Rite #6**, and #7 Booms on a variety of Pearson, Bristol, Sabre Yachts and others.
Vang Bracket Ass'y w/ Toggle: RR 7M-VBA-8: SS Vang Bracket Assembly for RR #7 Mast Section has pivoting Toggle with 1/2" Pin hole, for use with rigid or soft boom vangs. Bracket (RR 7M-GB4) is 4" vertical x approximately 3 1/4" wide, and attaches to the mast with (6) 1/4" RH fasteners.
Vang Bracket for Rigid Vang – Special: A variety of semi-custom Brackets, or Bracket/Toggle combinations are available to fit rigid (or solid) vangs produced by a number of manufacturers. Please specify vang manufacturer, model and size.

Electrical Access Plate: RR 72-99: Electrical Access Plate is designed to allow access to internal electrical plugs above the mast step, without having to unstep the mast. Saves much in frustration and money by allowing you to check mast wiring connections with the mast up. SS Plate is 4 1/2" x 2" and is designed to cover a 3" x 1 1/4" vertical slot in the side of the mast, just above the top of the mast step. Plate is slightly curved to fit a variety of mast sections and attaches with (4) 1/4-20 RH machine screws (included).
Electrical Wire Slide: K-10908: Electrical Wire Slides - 10 Pack: K-10908P: Nylon slides fits all Kenyon and Rig-Rite (and many MetalMast) mast sections with internal electrical wire slide tracks. Slides are attached to wiring harness at 2-3 foot intervals with tie wraps. Prevents wires from slapping, and from fouling internal halyards. Molded Nylon slide is 3/4" long x 1/2" high x (maximum) 1/4" wide. Please note: Early versions of the RR #7 Section did not have internal wiring grooves (as pictured here), Electrical Wire Slides are not used with them.
Mast Step - Deck Mount: RR 7M-DS: Mast Step for RR #7 Section fastens to deck or keelson with (2) 3/8" RH screws or bolts. Cast Aluminum Mast Step is (maximum) 5 1/2" long x 3 1/2" wide and features drainage channel to prevent water accumulation inside the mast.
*Hinged Mast Step Assembly: RR 7M-DSH:* Hinged tabernacle assembly for RR #7 section allows for easy mast-stepping. Consists of RR 7M-DS Mast Step casting bolted to K-1374 Mast Hinge Assembly.
*Halyard Organizer Plate: K-1374HP:* Halyard Organizer Plate is designed to fit under the K-1374 Mast Hinge Assembly, using the same deck bolts. New-style formed SS Plate has a total of fourteen (14) 1/2" holes on 4 sides for attaching halyard turning blocks, boom vang, and halyard shackles. Base is 7 1/2" long x 4" wide and mounts with (4) 5/16" bolts on 4 1/4" x 2 3/4" hole centers. Plate measures 8 1/2" x 5 3/4" overall and can also be drilled for use with any mast step up to 4" wide.

Your cart

Spars, Rigging, and Hardware for Sailboats