 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Boom Gooseneck Cams |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Boom Gooseneck Cams |
|
|
|
|
| Boom Gooseneck Cams | |
|
A variety of modern Boom Goosenecks incorporate one or more Gooseneck Cams to lock off Outhaul
and/or Reef lines in the Gooseneck rather than have them cleated elsewhere on the Boom. Rig-Rite stocks a large selection of Gooseneck Cams. Most common Boom Gooseneck Cams are listed by Manufacturer, others are listed below. Kenyon Gooseneck Cams are listed on individual Boom Section pages, See Kenyon Spars. Isomat Gooseneck Cams are listed on individual Boom Section pages, See Isomat Boom Sections. Sparcraft Gooseneck Cams are listed on individual Boom Section pages, See Sparcraft Booms. Z-Spar Gooseneck Cams are listed together, See Z-Spar Boom Components. If you don't know who made your Boom, Identify your Boom Section. |
|
|
|
|
|
Boom Gooseneck Cams Most common Boom Gooseneck Cams are listed by Manufacturer, above. Others are listed here. |
|
|
|
|
|
Round Gooseneck Cams Round Machined Cams used in a variety of Custom Kenyon, Sparcraft, Charleston Spar and other Custom Goosenecks. |
|
| Round 2 1/2" x 9/16" Gooseneck Cam w/ (3) x 3/8" holes: K-11328S-9: | |
|
Round Gooseneck Cam Lever is used in a variety of Custom Sparcraft and Charleston Spar Goosenecks.
Round Machined Cam Lever is 2 1/2" OD x 9/16" wide, heavily knurled on its outer edge to ensure
line engagement. Unit fits on a 3/8" Pin, (3) off-center holes allow use for a wide variety of
line sizes, 3/8" hole centers are 1/2", 9/16" and 5/8" from edge.
|
|
| Round 2 1/2" x 5/8" Gooseneck Cam w/ (3) x 3/8" holes: K-11328S-10: | |
|
Round Gooseneck Cam Lever is used in a variety of Custom Sparcraft and Charleston Spar Goosenecks.
Round Machined Cam Lever is 2 1/2" OD x 5/8" wide, heavily knurled on its outer edge to ensure
line engagement. Unit fits on a 3/8" Pin, (3) off-center holes allow use for a wide variety of
line sizes, 3/8" hole centers are 1/2", 9/16" and 5/8" from edge.
|
|
| Round 3" x 5/8" Gooseneck Cam, 1/2" hole, 1" offset: K-11328: | |
|
Round Gooseneck Cam Lever is used in a variety of Custom Sparcraft and Charleston Spar Goosenecks.
Round Machined Cam Lever is 3" OD x 5/8" wide, heavily knurled on its outer edge to ensure
line engagement. Clear anodized unit fits on a 1/2" Pin, off-center hole is 1" from edge.
As used with Kenyon 3656 Boom
on J/35 and others. SPC B0700
|
|
| Round 3" x 5/8" Gooseneck Cam, 1/2" hole, 3/4" offset: K-11328B: | |
|
Round Gooseneck Cam Lever is used in a variety of Custom Sparcraft and Charleston Spar Goosenecks.
Round Machined Cam Lever is 3" OD x 5/8" wide, heavily knurled on its outer edge to ensure
line engagement. Black anodized unit fits on a 1/2" Pin, off-center hole is 3/4" from edge.
As used with Kenyon 3656 Boom
on J/35 and others. SPC B0700 Black
|
|
| Round 3" x 7/8" Gooseneck Cam, 1/2" hole, 1/2" offset: K-11328WL: | |
|
Round Gooseneck Cam Lever is used in a variety of Custom Sparcraft and Charleston Spar Goosenecks.
Round Machined Cam Lever is 3" OD x 7/8" wide, heavily knurled on its outer edge to ensure
line engagement. Unit fits on a 1/2" Pin and has 5/16" side hole for use w/ optional 5/16" SS Lever,
off-center hole is 1/2" from edge.
|
|
|
|
|
|
Schaefer / Hall Spar Gooseneck Cam |
|
|
Schaefer / Hall Spar Gooseneck Cam Lever: HS PR-7622:
Gooseneck Cam Lever is used in a variety of Schaefer and Hall Spar Goosenecks. Cast Aluminum Boom Gooseneck Cam Lever (Line Jammer) fits on a 3/8" Pin and is 7/16" wide x (max) 3 3/8" long. As used on J/22, J/27, J/28, Alerion 28 and many others. |
|
~ Home ~