 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Double Shroud Strap Tangs |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Double Shroud Strap Tangs |
|
|
|
|
| Double Shroud Strap Tangs Used on rigs with Double Lower Shrouds, these Tangs are also suitable in a variety of other applications. See also, Tangs Main Page. |
|
|
|
|
|
Double Shroud Tang for 3/16" Pins, 3/8" Bolt: K-8909M:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 1/8" diameter using standard Aircraft Forks. Tang is 3 1/4" long x 1 3/4" wide x 1/8" (.125") thick with (1) 3/8" mounting hole and (2) 3/16" Pin Holes. Pin Hole centers are 2" (vertical) from mounting hole and are 3/4" (horizontal) apart. Used as Lower Shroud Tang and in a variety of other applications. As used on Lightning.
|
|
|
|
|
|
Double Shroud Tang for 1/4" Pins, 3/8" Bolt: K-8910VR:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 5/32" diameter using standard Aircraft Forks. Tang is 4 1/4" long x 1 3/8" wide x .075" with (1) 3/8" mounting hole and (2) 1/4" Pin Holes. Pin Hole centers are 3" (vertical) from mounting hole and are 9/16" (horizontal) apart. Used as Lower Shroud Tang and in a variety of other applications.
|
 |
|
Double Shroud Tang for 1/4" Pins, 3/8" Bolt: K-8910:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 5/32" diameter using standard Aircraft Forks. Tang is 3 5/8" long x 1" wide (at top) x 1 1/2" wide (at bottom) x 1/8" (.125) with (1) 3/8" mounting hole and (2) 1/4" Pin Holes. Pin Hole centers are 2 1/2" (vertical) from mounting hole and are 3/4" (horizontal) apart.
|
|
|
Double Shroud Tang for 1/4" Pins, 3/8" Bolt: SP-203:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 5/32" diameter using standard Aircraft Forks. Tang is 4 1/4" long x 1" wide (at top) x 1 7/8" wide (at bottom) x .120" with (1) 3/8" mounting hole and (2) 1/4" Pin Holes. Pin Hole centers are 3 3/16" (vertical) from mounting hole and are 1 1/16" (horizontal) apart. Used as Lower Shroud Tang with SP-302 and SP-056 Spreader Bases, and in a variety of other applications. As Sch 85-54.
|
|
|
|
|
|
Double Shroud Tang for 5/16" Pins, 3/8" Bolt: K-8910-5:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 7/32" diameter using standard Aircraft Forks. Tang is 3 5/8" long x 1" wide (at top) x 1 1/2" wide (at bottom) x 1/8" (.125) with (1) 3/8" mounting hole and (2) 5/16" Pin Holes. Pin Hole centers are 2 1/2" (vertical) from mounting hole and are 3/4" (horizontal) apart.
|
|
|
Double Shroud Tang for 5/16" Pins, 3/8" Bolt: SP-205:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 7/32" diameter using standard Aircraft Forks. Tang is 6 5/8" long x 1" wide (at top) x 2 1/2" wide (at bottom) x .120" with (1) 3/8" mounting hole and (2) 5/16" Pin Holes. Pin Hole centers are 5 1/2" (vertical) from mounting hole and are 1 1/2" (horizontal) apart. Used as Lower Shroud Tang with SP-089 Spreader Bases, and in a variety of other applications. As Sch 85-55.
|
|
|
Double Shroud Tang for 5/16" Pins, 1/2" Bolt: SP-205-8S:
SS Double Shroud Tang mounts on a 1/2" bolt, for use with (2) Shrouds up to 7/32" diameter using standard Aircraft Forks. Tang is 5" long x 1 1/2" wide (at top) x 2 1/2" wide (at bottom) x .120" with (1) 1/2" mounting hole and (2) 5/16" Pin Holes. Pin Hole centers are 3 3/4" (vertical) from mounting hole and are 1 1/2" (horizontal) apart.
|
|
|
Angled Double Shroud Tang for 5/16" Pins, 1/2" Bolt: RR 85-2108-5P:
Angled Double Shroud Tang for 5/16" Pins, 1/2" Bolt: RR 85-2108-5S: SS Double Lower Shroud Tang mounts on a 1/2" bolt, for use with (2) Shrouds up to 7/32" diameter using standard Aircraft Forks. As RR 85-2108-5, above, but with forward Pin Hole angled for inboard chainplate attachment. As used on Sabre 28 (Mk.1&2), and in a variety of other applications.
|
|
|
|
|
|
Double Shroud Tang for 3/8" Pins, 1/2" Bolt: SP-205L-8S:
SS Double Shroud Tang mounts on a 1/2" bolt, for use with (2) Shrouds up to 9/32" diameter using standard Aircraft Forks. Tang is 5 3/8" long x 1 1/4" wide (at top) x 2 7/8" wide (at bottom) x 3/16" with (1) 1/2" mounting hole and (2) 3/8" Pin Holes. Pin Hole centers are 3 3/4" (vertical) from mounting hole and are 1 1/2" (horizontal) apart. Sch |
|
~ Home ~
