Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com         Ordering/Questionsp

Specialty Cleats


Specialty Cleats
A variety of Cleats for Special Applications are available.
If you require Cleats not listed, please forward a sketch or photo of your Cleat with measurements, hole spacing (to centers), full details of the part, boat model and year.
See also: Cleats Main Page.

 
Downhaul Cleats
Shroud Cleats
Cleats on Slides
 

 Downhaul Cleats
Downhaul Cleat Ass'y - 3 1/4" long, Black: K-1108:

Aluminum Downhaul Cleat mounts in luff groove of Mast Sections with 1/2" (or larger) Boltrope Groove. Unit consists of K-1617-1 3 1/4" Cleat mounted on a 3 1/2" length of 1/2" OD anodized Aluminum tube. Tube slides into luff groove, screws are tightened to lock Cleat in desired position. Long tube with off-center cleat prevents Gooseneck Slide from hitting Cleat.

 

Downhaul Cleat Ass'y - 4" long, Black: K-1414:

Aluminum Downhaul Cleat mounts in luff groove of Mast Sections with 1/2" (or larger) Boltrope Groove. Unit consists of K-10324 4" Spar Cleat mounted on a 3 1/2" length of 1/2" OD anodized Aluminum tube. Tube slides into luff groove, screws are tightened to lock Cleat in desired position. Long tube with off-center cleat prevents Gooseneck Slide from hitting Cleat.

 


 Shroud Cleats
Aladdin Shroud-Mount Cleat Ass'y: Mom 70-ACP:
Named for its' resemblance to the famous lamp, this Shroud Cleat attaches to Wire or Rod rigging from 1/8" to 5/16" diameter with SS clamp. Molded plastic Cleat is 3 7/8" long x (maximum) 7/8" wide with a hole on one end for attachment of shackles or line. Ideal for flag halyards, radar reflectors, etc..

 

SS Shroud-Mount Cleat Ass'y - 4 1/2" long: Jon 40-518:

Unique SS Shroud Cleat attaches to Wire or Rod rigging from 5/32" to 3/8" diameter with SS U-bolt. Stamped SS Cleat is 4 1/2" long x (maximum) 1" wide with a 5/8" hole on one end for attachment of shackles or line. Ideal for flag halyards, radar reflectors, etc..

 


 Cleats on Slides

SS Cleat on Slide for 1" T-Track: Sch 70-74:

Cast Stainless Steel Cleat and Slide Assembly for 1" T-Track. Cleat is 6 1/2" long, unit features recessed Spring Pin to lock it in place anywhere along Track, Cleat is suitable for line up to 1/2". Ideal for mooring and spring lines, fenders, etc..

 

 
SS Cleat on Slide for 1 1/4" T-Track: Sch 70-75:

Cast Stainless Steel Cleat and Slide Assembly for 1 1/4" T-Track. Cleat is 7 1/2" long, unit features recessed Spring Pin to lock it in place anywhere along Track, Cleat is suitable for line up to 5/8". Ideal for mooring and spring lines, fenders, etc..

 

 
Cleat on Slide for 1 1/4" T-Track: Sch 72-99X:

Cast 8" Aluminum Cleat on Stainless Steel Slide for 1 1/4" T-Track. SS Slide is 6" long and features central thumb screw to lock it in place anywhere along Track, 8" Cleat is suitable for line up to 5/8". Ideal for mooring and spring lines, fenders, etc..
 

~ Back to Cleats Main Page ~

~ Back to Hardware Main Page ~

~ Home ~