 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Rudder Bushings |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Rudder Bushings |
|
|
|
|
| Rudder Bushings | |
|
Rudder Bushings are used with inboard-mounted Rudders to reduce friction where the Rudder
Shaft passes through the deck and/or hull. They are commonly produced with a Flanged head. Rudder Head Bushings fit over the Rudder Shaft under the Rudder Head to reduce wear between the Rudder Head and the Flange Bushing or deck beneath it. They are essentially large precision washers. Rudder Shoe Bushings are used with Keel or Skeg-mounted Rudders to reduce lateral friction where the bottom of the Rudder Shaft seats in a Rudder Shoe socket or on a Rudder Shoe Pin. If you require Rudder Bushings not listed here, we can custom make the ones you need, given sufficient time. For a quote on Custom Rudder Bushings please forward a sketch of the Bushing(s) you require with precise measurements and all boat details. |
|
|
|
|
| Flanged Rudder Bushing Set for 2 3/8" OD Shaft: PP RB235FA: | |
|
Rudder Bushing Set for actual 2 3/8" (.375") OD Rudder Shaft. 3-Piece Set includes (2) Flange
Bushings and (1) Head Bushing. Turned Delrin Flange Bushings are 2.375" ID x 2 5/8" OD and 1 1/4"
long below the head, Flange head is 3" OD x 1/4" thick. Flange Bushing Shaft OD has milled flats
for better adhesion of caulk. Delrin Head Bushing is 3" OD x 3/16" thick, and fits between the upper
bushing and the Rudder Head. As used on some early Pearson 26's and 30's.
|
|
| Flanged Rudder Bushing Set for <2 3/8" OD Shaft: PP RB235FA-U: | |
|
Rudder Bushing Set for undersize 2 3/8" OD Rudder Shaft. 3-Piece Set includes (2) Flange
Bushings and (1) Head Bushing. Turned Delrin Flange Bushings are 2.350" ID x 2 5/8" OD and 1 1/4"
long below the head, Flange head is 3" OD x 1/4" thick. Flange Bushing Shaft OD has milled flats
for better adhesion of caulk. Delrin Head Bushing is 3" OD x 3/16" thick, and fits between the upper
bushing and the Rudder Head. As used on some later Pearson 26's and 30's, and Pearson 28-1.
|
|
|
Rudder Bushing for <2 3/8" OD Shaft: PP RB235L:
Rudder Bushing for undersize 2 3/8" OD Rudder Shaft. Turned Delrin Bushing is 2.354" ID x 3" OD x 4" long. As used (2 ea.) on Pearson 28-2, 31, and 33.
|
|
| Flanged Rudder Bushing for 3 7/16" OD Shaft: PP RB21279F: | |
|
Flanged Rudder Bushing for 3 7/16" OD Rudder Shaft. Turned Delrin Flange Bushing is 3.450" ID x
4 1/4" OD and is 2 5/8" long below the head. Flange head is 5 3/8" OD x 3/8" thick.
Bushing Shaft OD is scored for better adhesion of caulk.
As used on some Freedom 30's. FY #21279. os-up
|
|
|
|
|
|
Rudder Head Bushing for 2" OD Shaft: PP RB200H:
Rudder Head Bushing for 2" OD Rudder Shaft. Turned Delrin Bushing is 2" ID x 2 7/8" OD x 17/64" thick. Bushing fits on Rudder Shaft below Rudder Head. As used on Sabre 28. wRB193 - 1 15/16x3 1/16x1/2
|
|
|
Rudder Head Bushing for 2 3/8" OD Shaft: PP RB235H:
Rudder Head Bushing for 2 3/8" OD Rudder Shaft. Turned Delrin Bushing is 3" OD x 2.380" ID x 3/16" thick. Bushing fits on Rudder Shaft below Rudder Head. As used on some Pearson 26's, 28's and 30's.
|
|
|
|
|
|
Rudder Shoe Bushing for 1 5/8" ID Shaft: PP RB131T-S:
Rudder Shoe Bushing for 1 5/8" ID Rudder Shaft. Bushing fits over 1 5/16" Pin in Rudder Shoe and inside 1 5/8" ID Rudder Shaft. Turned Delrin Bushing is 1 5/8" OD x 1 5/16" ID and is 1 1/4" long. As used on some Tartan 34's. |
|
~ Back to Rudder Hardware Main Page ~
~ Home ~