 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Bronze Stanchion Bases |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Bronze Stanchion Bases |
|
|
|
|
| Bronze Stanchion Bases |
|
Rig-Rite stocks a variety of Cast Bronze Stanchion Bases for use on Traditional Yachts. All Stanchion Bases listed here are for use with 1" (25.4mm) Stanchions unless otherwise noted. For Backing Plates, See: Stanchion Base Backing Plates. |
|
|
| Cast Bronze Stanchion Base w/ Single Bail - 5°: SB 36-BZT-5: |
|
|
Cast Bronze Stanchion Base with Single Bail and a 5° inboard angle. Trapezoidal Base is (maximum)
4" long x 2 5/8" wide and attaches to Deck with (4) 1/4" FH screws on 2" (inboard) x 3" (outboard)
hole centers. Unit features drain hole and is tapped for (2) 1/4"-20 screws.
For positive attachment a clearance hole is drilled in Stanchion so RH screw can pass through
Stanchion wall, set screw prevents any horizontal movement. Base has caulking groove and a recessed
center to reduce rocking on uneven surfaces. As used by Cape Dory.
|
 |
| Cast Bronze Stanchion Base w/ Double Bail - 5°: SB 36-BZR-5: |
|
| Rectangular Bronze Stanchion Base with Double Bail and a 5° inboard angle. Cast Bronze Base is (maximum) 4" long x 3" wide and attaches to Deck with (4) 1/4" FH screws on 2 1/2" (fore and aft) x 2" (athwartships) hole centers. Unit has (2) 1/4"-28 set screws to secure Stanchion. *** SSopt |
 |
~ Back to Stanchion Bases Main Page ~
~ Back to Hardware Main Page ~
~ Home ~