 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Amiot 25mm T-Track & Parts |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Amiot 25mm T-Track & Parts |
|
|
|
|
| Amiot 25mm T-Track is a clear anodized, extruded aluminum T-Track that measures 25mm (<1") across the top, with 4mm (5/32") thick flanges. | |
| Amiot 25mm T-Track
|
 |
|
|
|
| Amiot 25mm T-Track | |
|
Amiot 25mm T-Track: Ami 25TCA-__ft.: Amiot 25mm T-Track is a clear anodized, extruded aluminum T-Track that measures 25mm (<1") across the top, 14mm (<9/16") across the bottom, and is (maximum) 12mm (<1/2") high, with 4mm (5/32") thick flanges. Track is drilled for 6mm (1/4") FH screws on 100mm (3 7/8") centers, and has 9mm (5/16") diameter stop holes on 100mm (3 7/8") centers. Amiot 25mm T-Track is available in a variety of lengths up to 2 meters (6' 6"). Older versions of this track had holes for 5mm (3/16") FH screws on 80mm (3 1/8") centers.
|
|
|
|
|
| Track Ends & Stops | |
|
Plastic Track End Stop: Ami 25T-01:
Hard molded Black plastic Track End for Amiot 25mm T-Track. Covers track end and attaches to Deck with (usually through a 12mm hole in the Track) with (1) 5mm (#10 - 3/16") FH screw. Unit is maximum 1 15/16" (50mm) long and extends 1 3/16" (30mm) beyond Track when mounted through 12mm Stop Pin hole, or 1 11/16" (43mm) beyond Track when mounted abutting Track end.
|
|
|
Adjustable Track Stop: Ami 25T-03: Adjustable SS Track Stop for Amiot 25mm T-Track features SS Spring Pin and is used to limit the movement of other components. Stainless Steel Track Stop is 1" long x 1 1/8" wide, and has a 5mm (3/16") plunger Pin.
|
|
|
|
|
| Genoa Cars for 25mm T-Track | |
|
Genoa Slide w/ Eye & Spring Pin Stop: Har B156M:
Heavy-duty Harken Chromed Bronze Genoa Slide for 25mm T-Track features SS Spring Pin and Eye for attachment of Snatch Block or lines. Cast Bronze Slide is 80mm (3 1/8") long x 37mm (1 7/16") wide x (maximum) 47mm (1 7/8") high. Unit features plastic Liners to reduce friction and is positioned securely with 8mm (5/16") SS Spring Pin which locks in up and down position. Safe working load is 950 kg (2050 lbs.). Replacement Liners are: Har B1871-LP:
|
|
|
Genoa Car w/ Wide Sheave & Spring Pin Stop: Ami 25T-10:
Genoa Lead Car for Amiot 25mm T-Track features SS Spring Pin and articulating carriage with wide delrin Sheave for Genoa sheets. Cast aluminum Car has 40mm (1 9/16") OD x 30mm (1 3/16") wide Sheave for up to 1/2" line, or 2 sheets up to 3/8" line. Car is positioned securely with 8mm (5/16") SS Spring Pin, and is 3 1/8" (80mm) long with a maximum width of 1 5/8" (42mm). Generally used on boats 29' (9M) and smaller. 93607
|
 |
|
Tri-Roller Genoa Car for Towing: Har B1871AM:
Unique Harken Genoa Lead Car for 25mm T-Track features wide delrin Sheave and 2 vertical Rollers to accept a wide range of lead angles for minimum Genoa sheet chafe. Towable Car has 1/4" (6mm) hole on forward side for attachment of control line block, and rides on plastic liners to minimize friction. Cast aluminum Car has 1 3/8" OD x 1 1/2" wide Delrin Sheave for up to 5/8" line, and (2) side rollers 5/8" diameter x 2 1/4" long. Car is 3 1/2" (89mm) long with a maximum width of 2 1/8" (55mm). Replacement Liners are: Har B1871-LP:
|
|
|
Liners for Harken 25mm Genoa Cars (pair): Har B1871-LP:
Plastic Liner pair for all Harken 25mm Genoa Lead Cars and Slides, as used on Har B156M, and Har B1871AM, above. Black Plastic Liners are (maximum) 3 5/16" (84mm) long. Fits into slot on Car that is 80mm long x 6.5mm wide. |
|
~ Top ~
~ Back to Amiot T-Track Main Page ~
~ Home ~