Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Rod Spreader Bends
Spreader Bends are used on continuous Rigging to hold the Spreader Tip in place and to provide better strain relief thus increasing fatigue life of the Rod. Spreader Bends are slid onto the Rod, positioned carefully, then the Rod and Spreader Bend are bent permanently to the correct angle of deflection. See also, other Rod Rigging Components.

Navtec Rod Spreader Bends

OS Rod Spreader Bends
 
  Navtec Rod Spreader Bends
Aluminum and Stainless Navtec Rod Spreader Bends, and variants.

L200 - Aluminum Spreader Bends  
L201X - Stainless Steel Spreader Bends  
L250, L270 - Tapered Stainless Steel Spreader Bends
 
  Aluminum Spreader Bends - L200
Standard size anodized Aluminum Spreader Bends are the lightest-weight option for Spreader Bends. Made in a variety of lengths to accommodate a wide range of Spreader Tip thicknesses. "U" Length is the width of the center section, Spreader Tip thickness will be slightly less.
 
 Part #  Rod Size  "U" Length  Length  OD max.  OD min.  
: Nav L200-004-24:  -4 (.172")  3/4"  1 3/4"  .50"  .30"  *
: Nav L200-004-40:
 -4  1 1/4"  1.8"  .50"  .30"  206
: Nav L200-004-48:
 -4  1 1/2"  2.05"  .50"  .30"  124
: Nav L200-004-64:
 -4  2"  2.55"  .50"  .30"  189
: Nav L200-006-28:  -6 (.198")  7/8"  1 7/8"  .62"  .37"  *
: Nav L200-008-32:  -8 (.225")  1"  2 1/4"  .68"  .43"  *
: Nav L200-008-64:
 -8  2"  3"  .68"  .43"  10
: Nav L200-010-32:  -10 (.250")  1"  2 1/4"  .68"  .43"  *
: Nav L200-012-40:  -12 (.281")  1 1/4"  2 7/16"  .75"  .49"  *
: Nav L200-015-48:  -15 (.296")  1 1/2"  2 1/2"  .75"  .49"  *
: Nav L200-015-64:
 -15  2"  3"  .75"  .49"  1
: Nav L200-017-48:  -17 (.330")  1 1/2"  2 15/16"  .87"  .55"  *
: Nav L200-022-56:  -22 (.375")  1 3/4"  3 1/4"  1"  .60"  *
 
  Stainless Steel Spreader Bends - L201X
Standard size Stainless Steel Spreader Bends are made to the same dimensions as the short versions of L200 Aluminum Spreader Bends. Slightly heavier, but with the obvious advantages of Stainless Steel.
 
 
 
 Part #  Rod Size  "U" Length  Length  OD max.  OD min.  
: Nav L201-004-24:
 -4  3/4"  1 3/4"  .56"  .30"  049
: Nav L201-006-28:  -6  7/8"  1 7/8"  .62"  .37"  
: Nav L201-008-32:  -8  1"  2 1/4"  .685"  .43"  
: Nav L201-010-32:  -10  1"  2 1/4"  .68"  .43"  
: Nav L201-012-40:  -12  1 1/4"  2 7/16"  .75"  .49"  
: Nav L201-017-48:  -17  1 1/2"  2 15/16"  .87"  .55"  
: Nav L201-022-56:  -22  1 3/4"  3 1/4"  1"  .60"  
 
  Tapered Stainless Steel Spreader Bends - L250
Tapered Stainless Steel Spreader Bends are longer than the Standard Spreader Bends, providing better strain relief and increasing fatigue life of the Rod.
 
 Part #  Rod Size  "U" Length  Length  OD max.  OD min.  
: Nav L250-004:  -4  3/4"  2.68"  .50"  .30" *
: Nav L250-006:  -6  7/8"  3.22"  .63"  .37" *
: Nav L250-008:
 -8  1"  3.60"  .69"  .43"  
: Nav L250-010:  -10  1"  3.60"  .69"  .43" *
: Nav L250-012:
 -12  1 1/4"  4.2"  .75"  .49"  
: Nav L250-015:  -15  "  "  "  " *
: Nav L250-017:  -17  1 1/2"  4.9"  .75"  .55" *
: Nav L250-022:  -22  1 3/4"  4.85"  1"  .60" *
: Nav L250-463:
 -.463"  2"  5.21"  1"  .60"  2
: Nav L270-768:
 -.768"  1.43"  "  1"  .60"  002
 
  OS Rod Spreader Bends
Highly polished OS standard Stainless Steel Rod Spreader Bends. "U" Length is the width of the center section, Spreader Tip thickness will be slightly less.
 
 
 Part #  Rod Size  "U" Length  Length  OD max.  OD min.  
: OS 58000045:
 -4  17.7mm  39mm  11mm  7.6mm  
: OS 58000050:
 -6  18.5mm  39mm  11mm  8mm  
: OS 58000057:
 -8  23.5mm  46mm  12mm  9mm  
: OS 58000064:
 -10  33.5mm  56mm  13mm  10mm  
: OS 58000071:
 -12  33.5mm  56mm  13mm  10mm  
: OS 58000075:  -15  38.6mm  63mm  14mm  11mm *
: OS 58000084:
 -17  38.6mm  63mm  14mm  11mm  
: OS 58000095:
 -22  43.6mm  70mm  16mm  13mm  
: OS 58000111:
 -30  53.6mm  80mm  18mm  15mm  
: OS 58000127:
 -40  58.6mm  85mm  20mm  17mm  
: OS 58000143:
 -48  61.4mm  90mm  22mm  19mm  
: OS 58000168:
 -60  66.5mm  95mm  25mm  21mmm  
: OS 58000179:  -76  70.0mm  100mm  26.5mm  22mmm *
 

~ Back to Rod Rigging ~

~ Back to Rigging ~

~ Home ~