Rounded T-Ball Swages & Fittings

Rounded T-Balls listed here are an evolution of the standard Navtec/Gibb T-Balls originally introduced by Gibb in the early 1980's. Also known as Shroud Terminals and commonly referred to as 'Lollipops', they are stronger than the original T-Balls due to a reduced head angle, and require different Backing Plates. See: 'Rounded' T-Ball Backing Plates.

The 'Rounded' T-Ball Backing Plates provide the same sleek, lightweight, non-protruding Mast attachment for Rigging as Original T-Ball Backing Plates with the advantage of being installed in a Round Hole.
Common fittings for them include Swage and Mechanical terminals for Wire, as well as those for attachment of Fiber and Rod fittings.
*Please note that swage terminals are meant for professional installation only, and must be assembled with specialized swaging machines by professionals.

'Rounded' Shroud Terminal Fittings
Navtec/Gibb 'Rounded' Shroud Terminal Swage Fittings - N841
Navtec/Gibb 'Rounded' Shroud Terminal Norseman Fittings - N070
Navtec/Gibb 'Rounded' Shroud Terminal Aramid Fittings - R572-54

Navtec/Gibb 'Rounded' Shroud Terminal Swage Fittings - N841

Navtec/Gibb 'Rounded' Shroud Terminal Swage Fittings for 1x19 and 7-strand Wire Rope are commonly used for Shrouds and Running Backstays in larger sizes (7/32", 6mm +).
Used with Navtec/Gibb 'Rounded' T-Ball Backing Plates.

Part #	Wire Size	Fits Backing Plate	Rubber Plug
: Gib 841-7:	7/32"	(stamped): Gib 840-M06:	: Gib 842-M06:
: Gib 841-M06:	6mm	"	"
: Gib 841-8:	1/4"	"	"
: Gib 841-9:	9/32"/7mm	(stamped): Gib 840-M08:	: Gib 842-M08:
: Gib 841-10:	5/16"/8mm	"	"
: Gib 841-12:	3/8"	(cast): Gib 840-M10:	: Gib 842-M10:
: Gib 841-M10:	10mm	"	"
: Gib 841-14:	7/16"/11mm	(cast): Gib 840-M12:	: Gib 842-M12:
: Gib 841-M12:	12mm	"	"
: Gib 841-16:	1/2"	"	"

Your cart

Spars, Rigging, and Hardware for Sailboats