Common Replacement Parts are listed below.
Additional specifications and photographs of all components listed below, as well
as details of the Spar Sections and additional parts, are available on the
Spar Section, or Parts pages. Ideal 18 Masts use the
Sparcraft FM-35 Mast Section.
Ideal 18 Booms use the
Isomat NB-16 Boom Section.
Ideal 18 Spreaders use the
Isomat BF-2 Spreader Section.
|
| Ideal 18 Mast & Components -
Sparcraft FM-35 Mast
Section |
| Description |
Part # |
|
Ideal 18 Mast Assembly - Clear Anodized - 28' 7" LOA |
: FM35FM-I18A: |
|
Ideal 18 Mast Tube (8620mm) only - Clear Anodized - 28' 5 3/4" LOA |
: FM35FMT-I18: |
| Mast Tube is Tapered w/ welded Masthead, all slots & sailgate cutout,
ready to transfer hardware. No Hardware is included.
|
|
|
| Main Halyard Sheave - 40mm OD |
: FM0-3:
|
| Main Halyard sheave Axle - 8mm |
: FM0-6:
|
| Spinnaker Halyard Exit Block |
: Har 088:
|
| Spinnaker Halyard Fairlead, SS |
: NGA-65:
|
| T-Ball Backing Plate Tang, Forestay & Shrouds |
: NGA-38-5M:
|
| T-Ball Retaining Plug, Rubber for 2 Rivet type - All Shrouds |
: Gib 742-6:
|
| Spinnaker Pole Lift Exit Block |
: Har 088:
|
| Spinnaker Pole Eye SS Welded, Old-style |
: FM0-37X:
|
| Spinnaker Pole Eye SS Cast |
: FM1-37:
|
| Gate Screw, All SS - 10-32 |
: K-45S:
|
|
| Gooseneck Bracket |
: NG1-11N:
|
| NB1 Gooseneck Connector Kit |
: NB1-1K:
|
| NB1 Gooseneck Bracket Pin, 12mm |
: NB1-1:
|
| NB1 Tack Shackle |
: NB1-2:
|
| NB1 Horizontal Gooseneck Cylinder |
: NB1-3:
|
| NB1 Gooseneck Toggle |
: NB1-4:
|
| Clam Cleat Aluminum, CL 203A |
: CL 211-1:
|
| Eyestrap SS, 3/16" holes on 1 1/4" centers |
: K-226:
|
| Main Halyard Turning Block w/ Cam Cleat |
: Har 141: |
| Hinged Mast Step, Insert Casting |
: FM0-2BX: |
| Hinged Mast Step, Base Plate |
: FM0-2D:
|
|
|
Ideal 18 Spreaders & Components -
Isomat BF-2 Spreader Section
|
| Description |
Part # |
|
Port Spreader Assembly - Clear Anodized Max 705mm @30 |
: BF2FS-I18AP |
| Starboard Spreader Assembly - Clear Anodized |
: BF2FS-I18AS: |
| Spreader Tip |
: BF2-1:
|
| Spreader Bar w/ Stemball Seats Alu. |
: BF2-42-30S:
|
| Spreader Bar Clevis Pin, 8mm |
: BF2-30:
|
|
|
Ideal 18 Boom & Components -
Isomat NB-16 Boom Section
|
| Description |
Part # |
|
Ideal 18 Boom Assembly per Current Specifications - Clear Anodized |
: NB16FB-I18A: |
| Ideal 18 Boom Tube only - Clear Anodized - 9' (2750mm) |
: NB16x9MCA: |
|
| NB-16 Gooseneck Assembly w/ Rollers and Cams |
: NB16-1A: |
| Gooseneck Casting only |
: NB16-1: |
| Mainsheet/Vang Bail Assembly (4 pcs.) |
: NB1-15A:
|
| Spinnaker Pole Storage Bracket |
: : |
| Outhaul Assembly |
: NB16-2A:
|
| Outhaul Sheave |
: NB1-10:
|
| Outhaul Roller (2 required) |
: NB1-11R:
|
| Outhaul Axle |
: NB1-13:
|
| Outhaul Casting only |
: NB16-2:
|
|
|
Ideal 18 - Other Components |
| Description |
Part # |
|
Elvstrom SS Bailer,
'New Large', - mounts from outside Hull
|
: Elv 11-NL:
|
|
Rubber Gasket only for Elvstrom 'New Large' SS Bailer |
: Elv 11-NLG:
|
|
