Common Replacement Parts are listed below.
Additional specifications and photographs of all components listed below, as well as
details of the Spar Sections and additional parts, are available on the
Spar Section, or Parts pages.
Capri 30 Masts use the Kenyon 4060 Mast Section.
Capri 30 Booms use the Kenyon E-Section Boom.
Capri 30 Spreaders use the Kenyon SP-3 Spreader
Section. |
Capri 30 Mast & Components -
Kenyon 4060 Mast Section
|
| Description |
Part # |
| Capri 30 Mast Assembly - Clear Anodized |
: K-FM765A: |
| Capri 30 Mast Tube Only - Clear Anodized x 44' 10" |
: K-FMT765AW: |
| - Tube is Tapered w/ welded Trisect Masthead, & sailgate cutout, ready to
transfer hardware.
6g8-11
|
|
|
| Masthead Chafe Cage |
: K-11320:
|
|
Masthead Sheaves - Aluminum - New Style Heavy-duty w/ integral bushing
|
| - Main Halyard Sheave (2 1/2" OD x 1/4" ID) OR |
: K-198-10AB4:
|
| - Main Halyard Sheave (2" OD x 1/4" ID) |
: K-198-8AB4:
|
| - Jib Halyard Sheave (2 1/2" OD x 3/8" ID) OR |
: K-198-10AB6:
|
| -
Jib Halyard Sheave (2" OD x 3/8" ID) |
: K-198-8AB6:
|
| - Wing Halyard Sheaves (2 1/2" OD x 3/8" ID)
|
: K-198-10AB6:
|
| Main halyard Sheave & Topping lift Clevis Pin, 1/4" |
: CP4-36K:
|
| Sheave Axle Pin w/ Tab (for Jib halyard) 3/8" x 2 1/2" |
: K-10680-1:
|
| Sheave Axle Pin w/ Tab (for Wing halyards) 3/8" x 3" |
: K-10680:
|
| Headstay & Backstay Clevis Pin, 1/2" dia. |
: CP8-35M:
|
| Headstay Toggle Ass'y w/ 1/2" Pin |
: K-11537:
|
|
| T-Ball Backing Plate Tangs - Upper & Lower Shrouds (-7,-8,-9 wire) |
: Gib 740-7:
|
| T-Ball Backing Plate Tangs - Intermediate Shrouds (3/16") New style |
: Gib 740-6:
|
| T-Ball Backing Plate Tangs - Intermediate Shrouds (-5, -6) Old style |
: Gib 740-5:
|
| T-Ball Backing Plate Tangs - Checkstays (1/8") |
: Gib 740-3:
|
| T-Ball Retaining Plug - Rubber - Upper & Lower Shrouds |
: Gib 742-7:
|
| T-Ball Retaining Plug - Rubber - Intermediate Shrouds New style |
: Gib 742-6:
|
| T-Ball Retaining Plug - Rubber - Intermediate Shrouds Old style |
: Gib 742-5:
|
| T-Ball Retaining Plug - Rubber - Checkstays |
: Gib 742-3:
|
| Pole lift exit box - SS Old style w/ 1 1/2" Alu. sheave |
: K-11110A-1: |
|
| SS Exit Plate |
: K-10960:
|
| Slide Conversion Kit for 4" Gate - Closes Mainsail Gate for use w/ slugs |
: K-11656K:
|
| Slide Conversion Kit for 6" Gate - Closes Mainsail Gate for use w/ slugs |
: K-11754K:
|
| SS Roller Sailfeeder |
: K-11087: |
| Gooseneck/ Vang Bracket SS - for 1 1/2" Toggle |
: K-10650:
|
| Vang Tab (SS) for K-10650 Bracket |
: K-10963:
|
| Halyard Lead Swivel Block |
: K-10865:
|
| Mast Step Casting |
: K-10664-1:
|
|
Capri 30 Spreaders & Components -
Kenyon SP-3 Spreader Section |
| Description |
Part # |
| Upper Port Spreader Ass'y, Tapered - Clear Anodized |
: K-FSU765AP: |
| Upper Starboard Spreader Ass'y, Tapered - Clear Anodized |
: K-FSU765AS: |
| Lower Port Spreader Ass'y, Tapered - Clear Anodized |
: K-FSL765AP: |
| Lower Starboard Spreader Ass'y, Tapered - Clear Anodized |
: K-FSL765AS: |
| Spreader Bar SS - New style OR |
: K-11295:
|
| Spreader Bracket SS, Port - Old style |
: K-10981-P:
|
| Spreader Bracket SS, Starboard - Old style |
: K-10981-S:
|
|
Capri 30 Boom & Components - Kenyon E-Section
Boom |
| Description |
Part # |
| Capri 30 Boom Ass'y - Clear Anodized |
: K-FB765A: |
| Capri 30 Bare Boom Tube only - Clear Anodized (Max long 11'6") |
: K-FBT765A: |
| Capri 30 Standard Boom Tube only - Anodized & Painted White |
: K-FBT765SPW: |
| Capri 30 Racing Boom Tube only - Anodized & Painted White |
: K-FBT765RPW: |
|
| Gooseneck Ass'y w/ Cams |
: K-43006:
|
| Gooseneck Replacement Casting only |
: K-10364:
|
| Gooseneck Toggle w/ Reef Hooks |
: K-10345A:
|
| Gooseneck Vertical Clevis Pin - 3/8" x 2 3/8" Grip length |
: CP6-76K:
|
| Vang Bracket (SS) for Boom |
: K-1757-1:
|
| Vang Reinforcement Sleeve - Internal Stiffener |
: K-11903E:
|
| Mainsheet Bail for 3/8" bolt |
: K-2223:
|
| Mainsheet Bail - Internal |
: K-11428:
|
| Outhaul Ass'y - New Style for Flush Cut |
: K-11471:
|
| Outhaul Ass'y - Racing Cut-away End |
: K-43008:
|
