 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Kenyon Sheaves & Sheave Bushings |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Kenyon Sheaves & Sheave Bushings |
|
|
|
|
|
The most common Kenyon Sheaves are listed below, but many 'specials' have been
produced over time. If a Sheave you require is not listed, please contact us specifying
dimensions (OD, width, and ID), material (aluminum, plastic, etc.), and application.
If you do not have Sheave Dimensions, please note that many common
Replacement Sheaves are also listed underneath the component that they are part of. To
find the Sheave you need, first, determine which mast or boom section it is used with (see
Kenyon Mast Sections,
Kenyon Boom Sections
or
Kenyon One-Design Class Spars & Parts). Then,
click on that section, and scroll down to the appropriate part. If a Sheave you require is
not listed, measure it, and consult the list below.
|
||
|
|
||
5/8" OD Sheaves 7/8" OD Sheaves
1" OD Sheaves |
2" OD Sheaves |
Other Sheaves (non-Kenyon) Sheave Bushings & Spacers - Bronze |
|
|
||
| 5/8" OD Sheaves | ||
|
5/8" Nylatron Sheave - 1/2" wide, 1/4" ID: K-11585:
Black Nylatron Sheave is 5/8" OD x 1/2" (.484") wide x 1/4" ID. As used on K-11597 (outer rollers), and in other applications. With rope groove.
|
||
|
|
||
| 7/8" OD Sheaves | ||
|
7/8" Aluminum Sheave - 7/16" wide, 1/4" ID: K-198-3.5A:
Anodized aluminum Sheave is 7/8" OD x 7/16" (.440") wide x 1/4" ID. As used on Old-style D-Section Gooseneck (reef Sheaves), and in other applications. With wire/rope V-groove.
|
||
|
7/8" Nylon Sheave - 7/16" wide, 1/4" ID: K-199-2A:
White Nylon Sheave is 7/8" OD x 7/16" (.445") wide x 1/4" ID. With hub.
|
||
|
7/8" Nylon Sheave - 7/16" wide, 5/16" ID: K-199-2B:
White Nylon Sheave is 7/8" OD x 7/16" (.445") wide x 5/16" ID. Used on Kenyon small 4-wheel Traveller Car, and in other applications. With hub.
|
||
|
7/8" Delrin Sheave - 1/2" wide, 7/16" ID: K-11409:
Delrin Sheave is 7/8" OD x 1/2" (.500") wide x 7/16" ID. As used on New-style D-Section Gooseneck (reef Sheaves), and in other applications. With rope groove.
|
||
|
|
||
| 1" OD Sheaves | ||
|
1" Stainless Steel Sheave - 1/4" wide, 1/4" ID: K-198-4S: Stainless Steel Sheave is 1" OD x 1/4" wide x 1/4" ID.
|
||
|
1" Aluminum Sheave - 3/8" wide, 1/4" ID: K-10587:
Anodized aluminum Sheave is 1" OD x 3/8" wide x 1/4" ID. As used on J/24 for spinnaker halyard (outer Sheave), and in other applications.
|
||
|
1" Aluminum Sheave - 7/16" wide, 1/4" ID: K-198-4A:
Anodized aluminum Sheave is 1" OD x 7/16" (.435") wide x 1/4" ID. For Kenyon D-Section Gooseneck Outhaul, K-10658 Jib Box, and other applications.
|
||
|
1" Aluminum Sheave - 7/16" wide, 1/4" ID: K-198-4AWR:
Anodized aluminum Sheave is 1" OD x 7/16" wide x 1/4" ID. Wire/Rope Groove is specially designed to give better support for wire up to 3/32" diameter.
|
||
|
1" Aluminum Sheave - 7/16" wide, 3/8" ID: K-198-4A6:
Anodized aluminum Sheave is 1" OD x 7/16" (.435") wide x 3/8" ID.
|
||
|
1" Delrin Sheave - 7/16" wide, 1/2" ID: K-199-8:
Delrin Sheave is 1" OD x 7/16" wide x 1/2" ID. As used for control lines on some Kenyon 8-wheel Traveller Cars for 3/4" Track, and in other applications.
|
||
|
1" Delrin Sheave - 1/2" wide, 1/4" ID: K-11726-1: Delrin Sheave is 1" OD x 1/2" wide x 1/4" ID. As used on 2333 Gooseneck (upper Sheave), and in other applications.
|
||
|
1" Delrin Sheave - 1/2" wide, 3/8" ID: K-11726:
Delrin Sheave is 1" OD x 1/2" wide x 3/8" ID. As used on 2333 Gooseneck (lower Sheave), and in other applications.
|
||
|
1" Delrin Sheave - 1/2" wide, 1/2" ID: K-11412:
Delrin Sheave is 1" OD x 1/2" wide x 1/2" ID. As used on New-style E-Section, 3550, and 3756 Gooseneck (reef Sheaves), and in other applications.
|
||
|
|
||
| 1 1/16" OD Sheaves | ||
|
1 1/16" Nylon Sheave - 7/16" wide, 1/4" ID: K-199-3A:
Molded Nylon Sheave is 1 1/16" OD x 7/16" (.445") wide x 1/4" ID. With hub.
|
||
|
1 1/16" Nylon Sheave - 7/16" wide, 5/16" ID: K-199-3B:
Molded Nylon Sheave is 1 1/16" OD x 7/16" (.445") wide x 5/16" ID. With hub.
|
||
|
1 1/16" Delrin Sheave w/ Integral Bronze Bushing - 17/32" wide, 3/8" ID: K-10358:
Molded Delrin Sheave with integral Oilite Bronze bushing is 1 1/16" OD x 17/32" (.535") wide x 3/8" ID. As used on Old-style E-Section, 3550, and 3756 Gooseneck (reef Sheaves), and in other applications.
|
||
|
1 1/16" Delrin Sheave w/ Integral Bronze Bushing - 17/32" wide, 7/16" ID: K-10358-B7:
Molded Delrin Sheave with integral Oilite Bronze bushing is 1 1/16" OD x 17/32" (.535") wide x 7/16" ID.
|
||
|
1 1/16" Delrin Sheave - 17/32" wide, 9/16" ID: K-10266:
Molded Delrin Sheave is 1 1/16" OD x 17/32" (.525") wide x 9/16" ID. As used on most Kenyon Small 8-wheel, and large 4-wheel Traveller Cars, and in other applications.
|
||
|
1 1/16" Delrin Sheave - 5/8" wide, 3/8" ID: K-10266WS: Molded Delrin Sheave is 1 1/16" OD x 5/8" (.615") wide x 3/8" ID. s220
|
||
|
|
||
| 1 1/8" OD Sheaves | ||
|
1 1/8" Ball Bearing Sheave - 1/2" wide, 1/4" ID: K-11598:
Delrin Ball Bearing Sheave is 1 1/8" OD x 1/2" wide x 1/4" ID. With rope groove for up to 5/16" line. Black Delrin Sheave has a 300 lb. maximum working load. Har 160.
|
||
|
|
||
| 1 1/4" OD Sheaves | ||
|
1 1/4" Aluminum Sheave - 7/16" wide, 5/16" ID: K-8396A7-5: Anodized aluminum Sheave is 1 1/4" OD x 7/16" (.450") wide x 5/16" ID. With rope groove.
|
||
|
|
||
| 1 1/2" OD Sheaves | ||
|
1 1/2" Nylatron Wire Sheave - .200" wide, 1/4" ID: K-11593:
Heavy-duty Nylatron Sheave is 1 1/2" OD x .200" (<1/4") wide x 1/4" ID, for use with wire up to 5/32" diameter. As used on K-11590A (lower Sheaves), and in other applications.
|
||
|
1 1/2" Aluminum Sheave - 1/4" wide, 5/16" ID: K-10483:
Anodized aluminum Sheave is 1 1/2" OD x 1/4" wide x 5/16" ID. Used as outhaul Sheave on D-Section Outhaul Assembly, and in other applications.
|
||
|
1 1/2" Aluminum Sheave - 3/8" wide, 1/4" ID: K-10545:
Anodized aluminum Sheave is 1 1/2" OD x 3/8" (.370") wide x 1/4" ID. As used on J/24 Jib Halyard, and in other applications.
|
||
|
1 1/2" Aluminum Sheave - 3/8" wide, 3/8" ID: K-10545-1:
Anodized aluminum Sheave is 1 1/2" OD x 3/8" (.370") wide x 3/8" ID.
|
||
|
1 1/2" Delrin Sheave - 15/32" wide, 1/4" ID: K-199-4D: Delrin Sheave is 1 1/2" OD x 15/32" (.450") wide, x 1/4" ID.
|
||
|
1 1/2" Nylon Sheave - 15/32" wide, 5/16" ID: K-199-4B:
Molded Nylon Sheave is 1 1/2" OD x 15/32" (.450") wide, x 5/16" ID. As used on D-Section Outhaul Assembly for reefing Sheaves, and in other applications. With hub.
|
||
|
1 1/2" Nylon Sheave - 7/16" wide, 5/8" ID: K-199-4C:
Molded Nylon Sheave is 1 1/2" OD x 7/16" (.435") wide, x 5/8" ID. As used on Kenyon large Traveller Cars, and in other applications.
|
||
|
1 1/2" Nylatron Sheave - 1/2" wide, 1/4" ID: K-11595: Heavy-duty Nylatron Sheave is 1 1/2" OD x 1/2" (.484") wide x 1/4" ID. As used on K-11591A (lower Sheave), and in other applications.
|
||
|
|
||
| 1 3/4" OD Sheaves | ||
|
1 3/4" Nylatron Sheave - 1/2" wide, 5/16" ID: K-11639:
Heavy-duty Nylatron Sheave is 1 3/4" OD x 1/2" (.484") wide x 5/16" ID. As used on K-11597 (lower Sheave), and in other applications. With wire/rope V-groove.
|
||
|
1 3/4" Aluminum Sheave - 31/64" wide, 3/8" ID: K-198-7A:
Anodized aluminum Sheave is 1 3/4" OD x 31/64" wide x 3/8" ID. As used on all E-Section, 3550, and 3756 Goosenecks (outhaul Sheaves), mastheads, and in many other applications. Frequently used with Bronze Bushing K-9523, for use with 1/4" axle. With wire/rope V-groove.
|
||
|
1 3/4" Delrin Sheave - 31/64" wide, 3/8" ID: K-11881:
Light weight Plastic Sheave for use with rope. Sheave is 1 3/4" OD x 31/64" (.480") wide x 3/8" ID. Frequently used with Bronze Bushing K-9523, for use with 1/4" axle. With rope groove. K-198-7P
|
||
|
1 3/4" Aluminum Sheave - 31/64" wide, 7/16" ID: K-198-7A-7:
Anodized aluminum Sheave is 1 3/4" OD x 31/64" wide x 7/16" ID. With wire/rope V-groove. K-9951
|
||
|
1 3/4" Aluminum Sheave - 31/64" wide, 1/2" ID: K-198-7A-8:
Anodized aluminum Sheave is 1 3/4" OD x 31/64" wide x 1/2" ID. With wire/rope V-groove. K-9951-8
|
||
|
1 3/4" Aluminum Sheave w/ Integral Bronze Bushing - 1/2" wide, 1/4" ID: K-198-7AB4:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 1 3/4" OD x 1/2" wide (w/ bushing) x 1/4" ID. With wire/rope V-groove.
|
||
|
1 3/4" Aluminum Sheave w/ Integral Bushing - 1/2" wide, 5/16" ID: K-198-7AB5:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 1 3/4" OD x 1/2" wide (w/ bushing) x 5/16" ID. With wire/rope V-groove.
|
||
|
1 3/4" Aluminum Sheave w/ Integral Bronze Bushing - 1/2" wide, 3/8" ID: K-198-7AB6:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 1 3/4" OD x 1/2" wide (w/ bushing) x 3/8" ID. With wire/rope V-groove.
|
||
|
|
||
| 1 7/8" OD Sheaves | ||
|
1 7/8" Aluminum Sheave - 7/16" wide, 3/8" ID: K-10400:
Anodized aluminum Sheave is 1 7/8" OD x 7/16" (.435") wide x 3/8" ID. As used on all E-Section Outhaul Assemblies (reef Sheaves). With rope groove.
|
||
|
1 7/8" Sheave w/ Integral Bronze Bushing - 35/64" wide, 3/8" ID: K-10347:
Molded Delrin Sheave with integral Oilite Bronze bushing is 1 7/8" OD x 35/64" (.540") wide x 3/8" ID. As used on all 3550 and 3756 Outhaul Assemblies (reef Sheaves). With rope groove.
|
||
|
1 7/8" Sheave w/ Integral Bronze Bushing - 35/64" wide, 7/16" ID: K-8850-B7:
Molded Delrin Sheave with integral Oilite Bronze bushing is 1 7/8" OD x 35/64" (.540") wide x 7/16" ID. As used on 3756 4-Sheave Gooseneck Assembly (all Sheaves), and in a variety of Kenyon blocks. With rope groove.
|
||
|
1 7/8" Sheave - 17/32" wide, 9/16" ID: K-8850:
Molded Delrin Sheave is 1 7/8" OD x 17/32" (.530") wide x 9/16" ID. With rope groove.
|
||
|
|
||
| 2" OD Sheaves | ||
|
2" Nylatron Sheave - 1/2" wide, 5/16" ID: K-11640:
Heavy-duty Nylatron Sheave is 2" OD x 1/2" (.484") wide x 5/16" ID. As used on K-11597 (3 upper Sheaves), and in other applications. With wire/rope V-groove.
|
||
|
2" Nylatron Sheave - 1/2" wide, 5/16" ID: K-11594: Heavy-duty Nylatron Sheave is 2" OD x 1/2" (.484") wide x 5/16" ID. As used on K-11597, and in other applications. With rope groove. *
|
||
|
2" Nylatron Sheave - 1/2" wide, 3/8" ID: K-11638V:
Heavy-duty Nylatron Sheave is 2" OD x 1/2" (.484") wide x 3/8" ID. As used on K-11590 and K-11591 (upper Sheave), and in other applications. With wire/rope V-groove.
|
||
|
2" Nylatron Sheave - 1/2" wide, 3/8" ID: K-11638: Heavy-duty Nylatron Sheave is 2" OD x 1/2" (.484") wide x 3/8" ID. As used on K-11590 and K-11591 (upper Sheave), and in other applications. With rope groove. *
|
||
|
2" Aluminum Sheave - 31/64" wide, 3/8" ID: K-198-8A:
Anodized aluminum Sheave is 2" OD x 31/64" wide x 3/8" ID. As used on all E-Section, 3550, and 3756 Outhaul Assemblies (outhaul Sheave), mastheads, and in many other applications. Frequently used with Bronze Bushing, K-9523, for use with 1/4" axle. With wire/rope V-groove.
|
||
|
2" Aluminum Sheave w/ Integral Bronze Bushing - 1/2" wide, 1/4" ID: K-198-8AB4:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2" OD x 1/2" wide (w/ bushing) x 1/4" ID. With wire/rope V-groove.
|
||
|
2" Aluminum Sheave w/ Integral Bronze Bushing - 1/2" wide, 5/16" ID: K-198-8AB5:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2" OD x 1/2" wide (w/ bushing) x 5/16" ID. With wire/rope V-groove.
|
||
|
2" Aluminum Sheave w/ Integral Bronze Bushing - 1/2" wide, 3/8" ID: K-198-8AB6:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2" OD x 1/2" wide (w/ bushing) x 3/8" ID. With wire/rope V-groove.
|
||
|
2" Aluminum Sheave w/ Integral Bronze Bushing - 17/32" wide, 5/16" ID: K-10861-B5:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2" OD x 17/32" (.535") wide x 5/16" ID. With wire/rope V-groove. As used in K-10865 Mast mounted Halyard Turning Block.
|
||
|
2" Aluminum Sheave w/ Integral Bronze Bushing - 17/32" wide, 3/8" ID: K-10861-B6:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2" OD x 17/32" (.535") wide x 3/8" ID. With wire/rope V-groove.
|
||
|
2" Aluminum Sheave - 17/32" wide, 1/2" ID: K-10861:
Anodized aluminum Sheave is 2" OD x 17/32" (.535") wide x 1/2" ID. With wire/rope V-groove.
|
||
|
2" Aluminum Sheave - 17/32" wide, 9/16" ID: K-10861-1:
Anodized aluminum Sheave is 2" OD x 17/32" (.535") wide x 9/16" ID. With wire/rope V-groove.
|
||
|
2" Aluminum Sheave w/ Integral Bronze Bushing - 9/16" wide, 1/2" ID: K-11326:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2" OD x 9/16" (.575") wide x 1/2" ID. With wire/rope V-groove. ms
|
||
|
2" Aluminum Sheave - 9/16" wide, 3/4" ID: K-11326-1: Anodized Aluminum Sheave is 2" OD x 9/16" (.575") wide x 3/4" ID. With wire/rope V-groove. ms
|
||
|
|
||
| 2 1/2" OD Sheaves | ||
|
2 1/2" Aluminum Sheave - 31/64" wide, 3/8" ID: K-198-10A: Anodized Aluminum Sheave is 2 1/2" OD x 31/64" wide x 3/8" ID. With wire/rope V-groove.
|
||
|
2 1/2" Aluminum Sheave w/ Integral Bushing - 1/2" wide, 1/4" ID: K-198-10AB4:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2 1/2" OD x 1/2" wide (w/ bushing) x 1/4" ID. With wire/rope V-groove.
|
||
|
2 1/2" Aluminum Sheave w/ Integral Bushing - 1/2" wide, 5/16" ID: K-198-10AB5:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2 1/2" OD x 1/2" wide (w/ bushing) x 5/16" ID. With wire/rope V-groove.
|
||
|
2 1/2" Aluminum Sheave w/ Integral Bushing - 1/2" wide, 3/8" ID: K-198-10AB6:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2 1/2" OD x 1/2" wide (w/ bushing) x 3/8" ID. With wire/rope V-groove.
|
||
|
2 1/2" Aluminum Sheave w/ Integral Bushing - 1/2" wide, 7/16" ID: K-198-10AB7:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2 1/2" OD x 1/2" wide (w/ bushing) x 7/16" ID. With wire/rope V-groove.
|
||
|
2 1/2" Aluminum Sheave w/ Integral Bushing - 1/2" wide, 1/2" ID: K-198-10AB8:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2 1/2" OD x 1/2" wide (w/ bushing) x 1/2" ID. With wire/rope V-groove.
|
||
|
2 1/2" Aluminum Sheave - 31/64" wide, 1/2" ID: K-198-10A8:
Anodized Aluminum Sheave is 2 1/2" OD x 31/64" wide x 1/2" ID. With wire/rope V-groove. K-11447
|
||
|
2 1/2" Aluminum Sheave - 31/64" wide, 3/4" ID: K-11334:
Anodized Aluminum Sheave is 2 1/2" OD x 31/64" wide x 3/4" ID. With wire/rope V-groove.
|
||
|
2 1/2" Aluminum Sheave w/ Integral Bronze Bushing - 3/4" wide, 1/2" ID: K-11327:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 2 1/2" OD x 3/4" wide x 1/2" ID, with hub. With rope groove.
|
||
|
|
||
| 3" OD Sheaves | ||
|
3" Aluminum Sheave - 31/64" wide, 1/2" ID: K-198-12A:
Anodized Aluminum Sheave is 3" OD x 31/64" wide x 1/2" ID. With wire/rope V-groove. (K-11541) *
|
||
|
3" Aluminum Sheave w/ Integral Bronze Bushing - 1/2" wide, 3/8" ID: K-198-12A-B6: Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 3" OD x 1/2" wide (w/ bushing) x 3/8" ID. With wire/rope V-groove. *
|
||
|
3" Aluminum Sheave - 5/8" wide, 3/4" ID: K-11482:
Anodized Aluminum Sheave is 3" OD x 5/8" (.615") wide x 3/4" ID. With wire/rope V-groove.
|
||
|
3" Aluminum Sheave w/ Integral Bronze Bushing - 5/8" wide, 1/2" ID: K-11520:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 3" OD x 5/8" (.625") wide x 1/2" ID. With wire/rope V-groove.
|
||
|
|
||
| 3 1/4" OD Sheaves | ||
|
3 1/4" Aluminum Sheave - 3/4" wide, 3/4" ID: K-11533: Anodized Aluminum Sheave is 3 1/4" OD x 3/4" (.725") wide x 3/4" ID. With wire/rope V-groove. *
|
||
|
3 1/4" Nylatron Sheave - 13/16" wide, 3/4" ID: K-11621: Heavy-duty Nylatron Sheave is 3 1/4" OD x 13/16" (.785") wide x 3/4" ID. As used on K-11458, and in other applications. With rope groove. *
|
||
|
|
||
| 3 1/2" OD Sheaves | ||
|
3 1/2" Aluminum Sheave - 31/64" wide, 3/4" ID: K-198-14A:
Anodized Aluminum Sheave is 3 1/2" OD x 31/64" wide x 3/4" ID. With wire/rope V-groove. (Sparcraft M0301)
|
||
|
3 1/2" Aluminum Sheave w/ Integral Bushing - 1/2" wide, 1/2" ID: K-198-14AB8:
Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 3 1/2" OD x 1/2" wide (w/ bushing) x 1/2" ID, with hub. With wire/rope V-groove.
|
||
|
3 1/2" Aluminum Sheave w/ Integral Bushing - 5/8" wide, 7/16" ID: PP-S14AR10-B7: Anodized Aluminum Sheave with integral Oilite Bronze bushing. Sheave is 3 1/2" OD x 9/16" (5/8" w/ bushing) wide x 7/16" ID. With rope groove, for a maximum of 7/16" diameter line. As used on C&C Mastheads.
|
||
|
3 1/2" Aluminum Sheave - 5/8" wide, 3/4" ID: K-11676:
Anodized Aluminum Sheave is 3 1/2" OD x 5/8" (.625") wide x 3/4" ID. With rope groove. *
|
||
|
|
||
| 3 3/4" OD Sheaves | ||
|
3 3/4" Aluminum Sheave w/ Integral Bronze Bushing - 3/4" wide, 1/2" ID: K-10556:
Lightweight cast anodized aluminum Sheave with integral Oilite Bronze bushing is 3 3/4" OD x 3/4" wide x 1/2" ID. With wire/rope V-groove for up to 5/8" line and 1/4" wire, unit features recessed walls to minimize weight. As used on a variety of Mastheads and Boom Ends.
|
||
|
3 3/4" Aluminum Sheave w/ Integral Bushing - 3/4" wide, 5/8" ID: K-10556-B10:
Lightweight cast anodized aluminum Sheave with integral Oilite Bronze bushing is 3 3/4" OD x 3/4" wide x 5/8" ID. With wire/rope V-groove for up to 5/8" line and 1/4" wire, unit features recessed walls to minimize weight.
|
||
|
|
||
| 4" OD Sheaves | ||
|
4" Aluminum Sheave w/ Integral Bronze Bushing - 5/8" wide, 1/2" ID: K-11677-B8R: Anodized Aluminum Sheave with integral Oilite Bronze bushing is 4" OD x 5/8" wide x 1/2" ID. With Kevlar Groove for maximum performance with any line type up to 1/2" diameter. PP-S16AK10-B8 ms
|
||
|
4" Aluminum Sheave w/ Integral Bronze Bushing - 5/8" wide, 5/8" ID: K-11677-B10R: Anodized Aluminum Sheave with integral Oilite Bronze bushing is 4" OD x 5/8" wide x 5/8" ID. With Kevlar Groove for maximum performance with any line type up to 1/2" diameter. PP-S16AK10-B10
|
||
|
4" Aluminum Sheave - 5/8" wide, 3/4" ID: K-11677: Anodized Aluminum Sheave is 4" OD x 5/8" (.625") wide x 3/4" ID. With Kevlar Groove for maximum performance with any line type up to 1/2" diameter.
|
||
|
|
||
| 5" OD Sheaves | ||
|
5" Aluminum Sheave w/ Integral Bronze Bushing - 23/32" wide, 5/8" ID: K-11532V-B10: Anodized Aluminum Sheave with integral Oilite Bronze bushing is 5" OD x 23/32" (<3/4") wide x 5/8" ID. With wire/rope V-groove for wire to 5/16" and line up to 9/16" diameter.
|
||
|
5" Aluminum Sheave w/ Integral Bronze Bushing - 23/32" wide, 3/4" ID: K-11532V-B12: Anodized Aluminum Sheave with integral Oilite Bronze bushing is 5" OD x 23/32" (<3/4") wide x 3/4" ID. With wire/rope V-groove for wire to 5/16" and line up to 9/16" diameter.
|
||
|
5" Aluminum Sheave - 23/32" wide, 1" ID: K-11532V: Anodized Aluminum Sheave is 5" OD x 23/32" (<3/4") wide x 1" ID. With wire/rope V-groove for wire to 5/16" and line up to 9/16" diameter.
|
||
|
5" Aluminum Sheave - 15/16" wide, 3/4" ID: K-11532:
Anodized Aluminum Sheave for use with wire or rope. Sheave is 5" OD x 15/16" (.937") wide x 3/4" ID. Frequently used with Bronze Bushing K-11152, for use with 1/2" axle/Sheave pin. 78120 *
|
||
|
|
||
| 6" OD Sheaves | ||
|
6" Aluminum Sheave - 15/16" wide, 3/4" ID: K-11012: Anodized Aluminum Sheave for use with wire or rope. Sheave is 6" OD x 15/16" (.937") wide x 3/4" ID. Frequently used with Bronze Bushing K-11152, for use with 1/2" axle/Sheave pin. *
|
||
|
|
||
|
Kenyon Sheave Bushings and Spacers
For additional (Non-Standard) Sheave Bushings and Spacers, See
Sheave Bushings & Spacers. |
||
|
|
||
| Bronze Sheave Bushings | ||
| 3/8" Outside Diameter - Oilite Bronze Bushings | ||
|
Bronze Sheave Bushing: K-9523:
Sintered Bronze Sheave Bushing measures 3/8" OD x 1/4" ID x 1/2" long, for use on standard 1/4" axle. |
||
|
Bronze Sheave Bushing: K-11113:
Sintered Bronze Sheave Bushing measures 3/8" OD x 5/16" ID x 3/8" long, for use on standard 5/16" axle. |
||
|
Bronze Sheave Bushing: K-11588-14.5: Sintered Bronze Sheave Bushing measures 3/8" OD x 5/16" ID x 29/64" (>7/16") long, for use on standard 5/16" axle. |
||
|
Bronze Sheave Bushing: K-11588:
Sintered Bronze Sheave Bushing measures 3/8" OD x 5/16" ID x 1/2" long, for use on standard 5/16" axle.
|
||
|
|
||
| 7/16" Outside Diameter - Oilite Bronze Bushings | ||
|
Bronze Sheave Bushing: K-BB74-12:
Sintered Bronze Sheave Bushing measures 7/16" OD x 1/4" ID x 3/8" long, for use on standard 1/4" axle. |
||
|
Bronze Sheave Bushing: K-BB74-16:
Sintered Bronze Sheave Bushing measures 7/16" OD x 1/4" ID x 1/2" long, for use on standard 1/4" axle.
|
||
|
|
||
| 1/2" Outside Diameter - Oilite Bronze Bushings | ||
|
Bronze Sheave Bushing: K-BB84-16:
Sintered Bronze Sheave Bushing measures 1/2" OD x 1/4" ID x 1/2" long, for use on standard 1/4" axle. |
||
|
Bronze Sheave Bushing: K-10921:
Sintered Bronze Sheave Bushing measures 1/2" OD x 5/16" ID x 1/2" long, for use on standard 5/16" axle. |
||
|
Bronze Sheave Bushing: K-10972:
Sintered Bronze Sheave Bushing measures 1/2" OD x 3/8" ID x 1/2" long, for use on standard 3/8" axle. |
||
|
Bronze Sheave Bushing: K-BB86-20:
Sintered Bronze Sheave Bushing measures 1/2" OD x 3/8" ID x 5/8" long, for use on standard 3/8" axle.
|
||
|
|
||
| 9/16" Outside Diameter - Oilite Bronze Bushings | ||
|
Bronze Sheave Bushing: K-10346:
Sintered Bronze Sheave Bushing measures 9/16" OD x 3/8" ID x 17/32" (.535") long, for use on 3/8" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-8851-16: Sintered Bronze Sheave Bushing measures 9/16" OD x 7/16" ID x 1/2" (.500") long, for use on 7/16" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-8851:
Sintered Bronze Sheave Bushing measures 9/16" OD x 7/16" ID x 17/32" (.535") long, for use on 7/16" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-8851-20: Sintered Bronze Sheave Bushing measures 9/16" OD x 7/16" ID x 5/8" long, for use on 7/16" axle/Sheave pin.
|
||
|
|
||
| 5/8" Outside Diameter - Oilite Bronze Bushings | ||
|
Bronze Sheave Bushing: K-BB107-26: Sintered Bronze Sheave Bushing measures 5/8" OD x 7/16" ID x 13/16" long, for use on 7/16" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-BB108-14:
Sintered Bronze Sheave Bushing measures 5/8" OD x 1/2" ID x 7/16" long, for use on 1/2" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-BB108-20:
Sintered Bronze Sheave Bushing measures 5/8" OD x 1/2" ID x 5/8" long, for use on 1/2" axle/Sheave pin.
|
||
|
|
||
| 11/16" Outside Diameter - Oilite Bronze Bushings | ||
|
Bronze Sheave Bushing: K-BB118-20:
Sintered Bronze Sheave Bushing measures 11/16" OD x 1/2" ID x 5/8" long, for use on 1/2" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-BB118-22:
Sintered Bronze Sheave Bushing measures 11/16" OD x 1/2" ID x 11/16" long, for use on 1/2" axle/Sheave pin.
|
||
|
|
||
| 3/4" Outside Diameter - Oilite Bronze Bushings | ||
|
Bronze Sheave Bushing: K-BB128-16:
Sintered Bronze Sheave Bushing measures 3/4" OD x 1/2" ID x 1/2" long, for use on 1/2" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-11519:
Sintered Bronze Sheave Bushing measures 3/4" OD x 1/2" ID x 5/8" long, for use on 1/2" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-10597:
Sintered Bronze Sheave Bushing measures 3/4" OD x 1/2" ID x 3/4" long, for use on 1/2" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-11152:
Sintered Bronze Sheave Bushing measures 3/4" OD x 1/2" ID x 1" long, for use on 1/2" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-BB1210-20:
Sintered Bronze Sheave Bushing measures 3/4" OD x 5/8" ID x 5/8" long, for use on 5/8" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-BB1210-24:
Sintered Bronze Sheave Bushing measures 3/4" OD x 5/8" ID x 3/4" long, for use on 5/8" axle/Sheave pin.
|
||
|
|
||
| 7/8" Outside Diameter - Oilite Bronze Bushings | ||
|
Bronze Sheave Bushing: K-BB148-24:
Sintered Bronze Sheave Bushing measures 7/8" OD x 1/2" ID x 3/4" long, for use on 1/2" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-BB1410-24:
Sintered Bronze Sheave Bushing measures 7/8" OD x 5/8" ID x 3/4" long, for use on 5/8" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-BB1410-32:
Sintered Bronze Sheave Bushing measures 7/8" OD x 5/8" ID x 1" long, for use on 5/8" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-BB1412-24:
Sintered Bronze Sheave Bushing measures 7/8" OD x 3/4" ID x 3/4" long, for use on 3/4" axle/Sheave pin.
|
||
|
|
||
| 1" Outside Diameter - Oilite Bronze Bushings | ||
|
Bronze Sheave Bushing: K-BB1612-20:
Sintered Bronze Sheave Bushing measures 1" OD x 3/4" ID x 5/8" long, for use on 3/4" axle/Sheave pin. |
||
|
Bronze Sheave Bushing: K-BB1612-32:
Sintered Bronze Sheave Bushing measures 1" OD x 3/4" ID x 1" long, for use on 3/4" axle/Sheave pin.
|
||
|
|
||
|
Stainless Steel Sheave Bushings & Spacers
For additional (Non-Standard) Sheave Bushings and Spacers, See
Sheave Bushings & Spacers.
|
||
| 1/4" Outside Diameter - SS Bushings & Spacers | ||
|
SS Sheave Bushing/Spacer: BS43-15: Stainless Steel Bushing/Spacer is 1/4" OD x 3/16" ID x 15/32" (.475) long. |
||
|
SS Sheave Bushing/Spacer: K-9331:
Stainless Steel Bushing/Spacer is 1/4" OD x 3/16" ID x 11/16" (.710) long.
|
||
|
|
||
| 7/16" Outside Diameter - SS Bushings & Spacers | ||
|
SS Sheave Bushing/Spacer: K-9013:
Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x 13/32" (.410) long. |
||
|
SS Sheave Bushing/Spacer: K-11410:
Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x over 1/2" (.525) long. |
||
|
SS Sheave Bushing/Spacer: K-9014:
Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x 9/16" long. As used on 3756 4-Sheave Gooseneck Assembly (all Sheaves).
|
||
|
|
||
| 1/2" Outside Diameter - SS Bushings & Spacers | ||
|
SS Sheave Bushing/Spacer: K-11413:
Stainless Steel Bushing/Spacer is 1/2" OD x 3/8" ID x under 9/16" (.552) long. |
||
|
SS Sheave Bushing/Spacer: K-8533-2:
Stainless Steel Bushing/Spacer is 1/2" OD x 7/16" ID x 3/8" long.
|
||
|
|
||
| 5/8" Outside Diameter - SS Bushings & Spacers | ||
|
SS Sheave Bushing/Spacer: K-11258:
Stainless Steel Bushing/Spacer is 5/8" OD x 1/2" ID x 3/8" long.
|
||
|
|
||
| 3/4" Outside Diameter - SS Bushings & Spacers | ||
|
SS Sheave Bushing/Spacer: K-11576-1:
Stainless Steel Bushing/Spacer is 3/4" OD x 5/8" ID x 1/2" long. |
||
~ Top ~
~ Home ~