 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Gooseneck Slides |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Gooseneck Slides |
|
|
|
|
| Gooseneck Slides | |
| Gooseneck Slides are used to allow
easy adjustment of the Boom height, and either fit into an integral Track extruded in the
Mast Section, or to a separate Track mounted on the Mast. On smaller boats use of a
Gooseneck Slide will obviate the need for a Halyard Winch, by allowing use of a rope
tackle to tension the sail luff once the Halyard is cleated. All Gooseneck Slides
incorporate provisions for attachment of a downhaul line or shackle, or a pin stop to lock
it into place on the Track. Fixed Non-Sliding Gooseneck Brackets are listed separately, See: Gooseneck Brackets. Gooseneck Slides are listed here by the Type and size of the Track they slide in or on, Special Proctor Spars Gooseneck Slides and Slide Assemblies are listed separately. Rig-Rite stocks a large variety of Gooseneck Slides originally produced by many different Spar Builders. To determine which Gooseneck Slide you need, you must know the size of the Groove or Track it is to fit, and the Pin Size & Height of the Toggle it attaches to. As always, there have been many 'specials' produced over the years, if a Gooseneck Slide you need is not listed here, please contact us with complete dimensions. For Toggles compatible with the Gooseneck Slides listed here (and others), See Gooseneck Toggles. Gooseneck Slides for Internal Boltrope Groove Gooseneck Slides for Internal Flat Track |
|
|
|
|
| Gooseneck Slides for Internal Boltrope Groove | |
| Standard SS Gooseneck Slide for Boltrope & 3/4" Toggle: K-9138A: | |
|
Standard SS Gooseneck Slide designed for use with the standard Kenyon 3/4" Toggle,
K-9267. Slide fits Kenyon B, D, E,
3049, and 3650 Mast Sections, and other Mast Sections with a boltrope groove that is
9/16" ID or larger. Slide has welded SS ring for downhaul attachment and
includes 1/4" pin for Toggle attachment. Slide is 2 1/2" long x (maximum) 5/8" wide.
|
|
| Gooseneck Slide for Small Boltrope & 3/4" Toggle: K-9138-SA: | |
|
Special SS Gooseneck Slide designed for use with the standard Kenyon 3/4" Toggle,
K-9267, and Mast Sections with
smaller boltrope grooves. Slide fits Kenyon A, C-1, C-6, 2331, and MORC Mast Sections,
and other Mast Sections with a boltrope groove that is 1/2" ID or smaller.
Slide has welded SS ring for downhaul attachment and includes 1/4" pin for Toggle attachment.
Slide is 2 1/2" long x (maximum) 5/8" wide. #
|
|
|
Gooseneck Slide for Large Boltrope & 1" Toggle: K-1685A:
Standard SS Gooseneck Slide designed for use with the standard Kenyon 1" Toggle, K-1993. Slide fits Kenyon B, D, E, 3049, and 3650 Mast Sections, and other Mast Sections with a boltrope groove that is 9/16" ID or larger. Slide has heavy welded SS ring for downhaul attachment and includes 1/4" bolt and locknut for Toggle attachment. Slide is 3" long x 1" (maximum) wide.
|
|
|
Gooseneck Slide for Small Boltrope & 1" Toggle: K-10331A:
Special SS Gooseneck Slide designed for use with the standard Kenyon 1" Toggle, K-1993, and Mast Sections with smaller boltrope grooves. Slide fits Kenyon A, C-1, C-6, 2331, and MORC Mast Sections, and other Mast Sections with a boltrope groove that is 1/2" ID or smaller. Slide has heavy welded SS ring for downhaul attachment and includes 1/4" bolt and locknut for Toggle attachment. Slide is 3" long x 1" (maximum) wide.
|
 |
|
Gooseneck Slide for Large Boltrope & 1 1/2" Toggle: K-1685-1A:
SS Gooseneck Slide specially designed for use with Kenyon K-10518-series Gooseneck Toggle/Tack Assemblies. Slide fits Kenyon B, D, E, 3049, and 3650 Mast Sections, and other Mast Sections with a boltrope groove that is 9/16" ID or larger. Slide has heavy welded SS ring for attachment of downhaul line or shackle and includes vertical bolt and locknut. SS Gooseneck Slide is 3" high x 1" (maximum) wide and fits most 1 1/2" Toggles using a 1/4" vertical pin.
|
|
| Gooseneck Slide for Small Boltrope & 1 1/2" Toggle: K-10331-1A: | |
|
Special SS Gooseneck Slide specially designed for use with Kenyon
K-10518-series
Gooseneck Toggle/Tack Assemblies, and Mast Sections with smaller boltrope grooves. Slide fits
Kenyon A, C-1, C-6, 2331, and MORC Mast Sections, and other Mast Sections with a boltrope groove
that is 1/2" ID or smaller. Slide has heavy welded SS ring for attachment of downhaul line or
shackle and includes vertical bolt and locknut. SS Gooseneck Slide is 3" high x 1" (maximum) wide
and fits most 1 1/2" Toggles using a 1/4" vertical pin.
|
|
|
Special Gooseneck Slide for Boltrope & 1 1/2" Toggle: PP M5A:
Special Extruded Aluminum Gooseneck Slide fits RR-4025 Mast Section, and a few other Teardrop-shaped mast sections with a 1/2" boltrope groove. Aft side has 1 5/8" cutout for Gooseneck Toggle, PP B4, and others, and features 1/4" hole for downhaul line or shackle. Gooseneck Slide is 3" high x 5/8" wide and includes 1/4" vertical pin, locknut, and nylon washers to eliminate chafe against Toggle. Special, as used on Pearson 22, Ensign, Electra, and a variety of others.
|
 |
|
Bronze Gooseneck Slide for Boltrope & 2 1/4" Toggle w/ 1/2" Pin: Fam 1304B:
Chrome Bronze Gooseneck Slide for Boltrope & 2 1/4" Toggle w/ 1/2" Pin: Fam 1304C: |
|
|
Cast Bronze Gooseneck Slide was designed for use with special Famet Tubular Gooseneck Toggles,
Fam 1205T & 1206T, but
also accepts a variety of Gooseneck Toggles up to 2 1/4" high with a 1/2" clevis pin.
Slide fits all Mast Sections with a boltrope groove that is 9/16" ID or larger.
Slide has 5/16" hole for downhaul attachment and is 3 1/4" long x (maximum) 15/16" wide.
Used with Nicro-Fico standard and Roller-Reefing Goosenecks.
|
|
|
|
|
| Gooseneck Slides for Internal Flat Track | |
| Gooseneck Slide for 3/4" Internal Flat Track & 1 1/2" Toggle w/ 1/4" Pin: PP M6A: | |
|
Machined Aluminum Gooseneck Slide fits most Mast Sections with a 3/4" flat internal track. Gooseneck
Slide is 4" high x 11/16" wide and attaches to Toggle using a 1/4" vertical bolt. Aft side
has 1 5/8" cutout for Gooseneck Toggle, PP B4,
and others, and features 5/16" hole for downhaul line or shackle. Includes vertical SS bolt, locknut,
and nylon washers to eliminate chafe against Toggle. As used on Bristol 22, 24, Pearson 26 and others. *
|
 |
| Gooseneck Slide for 3/4" Internal Flat Track & 1 1/2" Toggle w/ 5/16" Pin: PP M7A: | |
|
Machined Aluminum Gooseneck Slide fits most Mast Sections with a 3/4" flat internal track.
Gooseneck Slide is 4" high x 11/16" wide and attaches to Toggle using a 5/16" vertical bolt.
Aft side has 1 5/8" cutout for Gooseneck Toggle, and features 5/16" hole for downhaul line or shackle.
Includes vertical SS bolt, locknut, and nylon washers to eliminate chafe against Toggle.
|
|
| Gooseneck Slide for 3/4" Internal Flat Track & 2 3/8" Toggle w/ 5/16" Pin: PP M7-25F: | |
|
Machined Aluminum Gooseneck Slide fits most Mast Sections with a 3/4" flat internal track.
Gooseneck Slide is 4 3/4" high x 11/16" wide and attaches to Toggle using a 5/16" vertical Pin.
Aft side has 2 1/2" cutout for Gooseneck Toggle, and features 5/16" hole for downhaul line or shackle.
Includes 5/16" vertical Pin and nylon washers to eliminate chafe against Toggle.
NR, Fam 1302+1/8 WR mm
|
|
| Gooseneck Slide for 3/4" Internal Flat Track & 1 1/2" Toggle w/ 3/8" Pin: PP M8-6V: | |
|
Cast Aluminum Gooseneck Slide fits most Mast Sections with a 3/4" flat internal track.
Gooseneck Slide is 5" high x (maximum) 1" wide and attaches to Toggle using a 3/8" vertical threaded Pin.
Aft side has 1 9/16" cutout for Gooseneck Toggle, and features 7/16" hole for downhaul line or shackle.
Includes vertical SS threaded Pin. Originally used with Vassen standard and Roller-Reefing
Goosenecks made in Holland in the 1960's. 66.52.14
|
|
| SS Gooseneck Slide for 3/4" Internal Flat Track & 2 1/16" Toggle w/ 3/8" Pin: PP M8-6S: | |
|
Cast, welded SS Gooseneck Slide fits most Mast Sections with a 3/4" flat internal track.
Gooseneck Slide is 3 3/4" high x (maximum) 7/8" wide and attaches to Toggle using a 3/8" vertical bolt.
Aft side has 2 1/8" cutout for Gooseneck Toggle, and features welded SS ring with 5/16" hole
for downhaul line or shackle. Includes vertical SS bolt, locknut, and nylon washers to
eliminate chafe against Toggle. Sch * .18T,1 3/8L,H@7/8
|
|
| Gooseneck Slide for 3/4" Internal Flat Track & 2 1/4" Toggle w/ 3/8" Pin: PP M8A: | |
|
Machined Aluminum Gooseneck Slide fits most Mast Sections with a 3/4" flat internal track.
Gooseneck Slide is 4 3/4" high x 11/16" wide and attaches to Toggle using a
3/8" vertical bolt. Aft side has 2 1/4" cutout for Gooseneck Toggle, and
features 5/16" hole for downhaul line or shackle. Includes vertical SS bolt, locknut, and nylon
washers to eliminate chafe against Toggle. WR mm
|
|
| Gooseneck Slide for 3/4" Internal Flat Track & 2 1/4" Toggle w/ 3/8" Pin: Fam 1302SR-6: | |
|
Cast Bronze Gooseneck Slide fits most Mast Sections with a 3/4" flat internal track. Gooseneck Slide
is 4 5/8" high x 1" (maximum) wide and uses a 3/8" vertical pin. Aft side has 2 5/16" cutout
for Gooseneck Toggle, and features 1/2" hole for downhaul line or shackle. This Slide is used with a
variety of vertical pin arrangements, so no vertical pin is included.
|
|
| Gooseneck Slide for 3/4" Internal Flat Track & 2 1/4" Toggle w/ 1/2" Pin: Fam 1302SR: | |
|
Cast Bronze Gooseneck Slide fits most Mast Sections with a 3/4" flat internal track. Gooseneck Slide
is 4 5/8" high x 1" (maximum) wide and uses a 1/2" vertical pin. Aft side has 2 5/16" cutout
for Gooseneck Toggle, and features 1/2" hole for downhaul line or shackle. This Slide is used with a
variety of vertical pin arrangements, so no vertical pin is included. Replaces original cast
Aluminum version. As used on Bristol 29.9, and Bristol 32 with a special Tack bolt arrangement and RR
Gooseneck Toggle, RR-45-67C.
*Spec BZ rep.
|
|
| Gooseneck Slide for 3/4" Internal Flat Track & 2 3/8" Toggle w/ 1/2" Pin: PP M8A-8: | |
|
Machined Aluminum Gooseneck Slide fits most Mast Sections with a 3/4" flat internal track.
Gooseneck Slide is 5 7/8" high x 7/8" (.865") wide and uses a 1/2" vertical pin.
Aft side has 2 7/16" cutout for Gooseneck Toggle, and features 1/2" hole for downhaul line or shackle.
Includes 1/2" Vertical Pin and nylon washers to eliminate chafe against Toggle.
As used on MetalMast MM7244 (and other Mast Sections with a 3/4" flat internal track) on a
variety of boats, including some Tartan 30's, and others.
|
 |
|
|
|
| Gooseneck Slide for 7/8" Internal Flat Track & 2 3/8" Toggle w/ 1/2" Pin: PP M9A: | |
|
Aluminum Gooseneck Slide has special configuration to fit all Mast Sections with a 7/8" or 15/16" flat
internal track. Gooseneck Slide is 5 7/8" high x 7/8" (.865") wide and uses a 1/2" vertical pin.
Aft side has 2 7/16" cutout for Gooseneck Toggle, and features 1/2" hole for downhaul line or shackle.
Includes 1/2" Vertical Pin and nylon washers to eliminate chafe against Toggle.
As used on Sound Spar SS7747T (and other Mast Sections with a 7/8" or 15/16" flat internal track)
on a variety of boats, including Allied Chance 3030, some Tartan 30's, and others.
Replaces earlier Cast version.
|
|
| Gooseneck Slide for 7/8" Internal Flat Track & 2 3/8" Toggle w/ 1/2" Pin: PP M9CS: | |
|
SS Gooseneck Slide to fit Mast Sections with a 7/8" flat internal track. Unique design allows use
with Toggles fitting inside or outside of ears, unit has no provisions for downhaul attachment.
Aft side ears allows use with a Toggle up to 1 3/4" high (between ears), or a Gooseneck Toggle with
a 2 5/8" cutout (fitting outside of the ears). Cast Stainless Steel Gooseneck Slide is 4" high x 1
1/4" (maximum) wide and uses a 1/2" vertical pin. This Slide is used with a variety of
vertical pin arrangements, so no vertical pin is included. ca
|
|
|
|
|
| Gooseneck Slide for 1" Internal Flat Track & 2 3/8" Toggle w/ 1/2" Pin: PP M10CS: | |
|
SS Gooseneck Slide to fit Mast Sections with a 1" flat internal track. Unique design allows use with
Toggles fitting inside or outside of ears, unit has no provisions for downhaul attachment. Aft side
ears allows use with a Toggle up to 1 3/4" high (between ears), or a Gooseneck Toggle with a 2 5/8"
cutout (fitting outside of the ears). Slide features (2) 1/4" screw holes for use when fixed
installation is required. Cast Stainless Steel Gooseneck Slide is 4" high x 1 1/4" (maximum) wide and
uses a 1/2" vertical pin. This Slide is used with a variety of vertical pin arrangements,
so no vertical pin is included. ca
|
|
| Gooseneck Slide for 1" Internal Flat Track & 2 3/8" Toggle w/ 1/2" Pin: Fam 89-3TN: | |
|
Cast Bronze Gooseneck Slide to fit Mast Sections with a 1" flat internal track. Cast Slide accepts a
variety of Gooseneck Toggles up to 2 3/8" high with a 1/2" SS clevis pin (included). Slide has
integral loop for downhaul attachment and is 6" high x 1 3/8" wide. Used with Famet standard and
Roller-Reefing Goosenecks.
|
|
|
|
|
| External Track Gooseneck Slides | |
| Slide & Gooseneck Ass'y for 5/8" Sailtrack & 5/8" Boom: Sch 89-30X: | |
|
SS Gooseneck Slide Assembly for 5/8" (11/16" wide) Sailtrack (or 5/8" Aluminum Gooseneck Slide Track)
and 5/8" wide Boom. Formed SS strap is 3 3/4" long x 1/2" wide, and attaches to 5/8" wide wood
"T" Boom with (2) #10 (3/16") screws and nuts. Slide is 1 13/16" long, fits 5/8" Sail Track,
and features captive SS Thumbscrew to allow for quick Boom height adjustment.
As used on El Toro.
|
|
|
Gooseneck Slide for 5/8" Sailtrack & 3/4" Toggle: K-1684-5:
SS Gooseneck Slide for 5/8" (11/16" wide) Sailtrack (or 5/8" Aluminum Gooseneck Slide Track) fits any gooseneck assembly using the standard Kenyon 3/4" Toggle, K-9267, with a 1/4" pin (included). Slide has 3/8" hole for downhaul attachment and a SS Thumbscrew to allow for quick Boom height adjustment. Slide is 4" long x 7/8" wide and fits 5/8" Sail Track. As used on Explorer, Pintail, and others. ##r
|
|
|
|
|
|
Gooseneck Slide for 7/8" Sailtrack & 3/4" Toggle: K-1684-7:
SS Gooseneck Slide for 7/8" Sailtrack fits any gooseneck assembly using the standard Kenyon 3/4" Toggle, K-9267, with a 1/4" bolt and locknut (included). Slide has welded eye for downhaul attachment and a SS Thumbscrew to allow for quick Boom height adjustment. Slide is 4" long x 1 1/8" wide and fits 7/8" Sail Track. ##r
|
|
|
|
|
| Gooseneck Slide for 7/8" x 1/8" Flat Track & 1" Toggle: K-1686A: | |
|
SS Gooseneck Slide for 7/8" x 1/8" SS Flat Track fits any gooseneck assembly using the standard
Kenyon 1" Toggle, K-1993, with a 1/4" bolt
and locknut (included). Slide has heavy welded SS ring for downhaul attachment. Slide is 3" long x
1 1/16" wide and fits 7/8" x 1/8" SS Flat Track.
|
|
| Bronze Gooseneck Slide for 7/8" x 1/8" Flat Track & 2 3/8" Toggle: Fam 1305-8A: | |
|
Bronze Gooseneck Slide fits 7/8" x 1/8" SS Flat Track. Cast Slide accepts a variety of Gooseneck
Toggles up to 2 3/8" high with a 1/2" SS clevis pin (included). Slide has integral loop for
downhaul attachment and is 4 1/2" long x 1 7/16" wide. Used with Famet standard and Roller-Reefing
Goosenecks.
|
|
|
|
|
| Gooseneck Slide for 15/16" x 1/4" T-Track & Special 5/8" Pin: Bart 89-1516S: | |
|
Special Chrome Bronze Gooseneck Slide for 15/16" x 1/4" T-Track fits Special 5/8" vertical gooseneck
Toggle Bolt. Slide has 5/8" ID x 1 1/2" long vertical Tube for attachment to Special vertical gooseneck
Toggle Bolt used with some Barton and Tuphfitting Gooseneck assemblies. Slide is 3 1/4" long x 1 1/4"
wide and includes thumbscrew for positive positioning on Track.
As used on Grampian 26; Mirage 26, 27; Tanzer 22, and others. Special Plastic Gooseneck T-Track
is also available in 15" lengths. Order: Bart 89-1516T:
|
 |
|
|
|
|
Gooseneck Slide for 1" x 1/8" Flat Track & 3/4" Toggle: RR-89-4TN: SS Gooseneck Slide for 1" x 1/8" SS Flat Track fits Rig-Rite 3/4" gooseneck Toggle with a 1/4" bolt and locknut (included). Slide has heavy welded SS ring for downhaul attachment. Slide is 3" long x 1 1/8" wide and fits 1" x 1/8" SS Flat Track. As used on some O'Day 27's.
|
|
| Gooseneck Slide w/ Spring Pin for 1" x 1/8" Flat Track & 3/4" Toggle: PP M10SA: | |
|
SS Gooseneck Slide with Spring Pin fits 1" x 1/8" SS Flat Track and standard 1" aluminum T-Track.
Slide fits special 3/4" Gooseneck Toggle
(Sch-45-S0404) with a
1/4" SS clevis pin (included). SS Spring Pin allows for quick and positive Boom height adjustment
in track stop holes. Slide is 3" long x 1 1/4" wide and fits 1" x 1/8" Flat Track.
As used on Pearson 365 and 424 Mizzen masts, and others.
|
 |
| Gooseneck Slide for 1" x 1/8" Flat Track & 1" Toggle w/ 1/4" Pin: K-1687XS: | |
|
Special SS Gooseneck Slide for 1" x 1/8" SS Flat Track (and standard 1" aluminum T-Track),
fits any gooseneck assembly using the standard Kenyon 1" Toggle,
K-1993, with a 1/4" bolt and locknut
(included). Slide has heavy welded SS ring for downhaul attachment. SS Slide is 3" long x 1 1/8" wide.
Available on Special order. As used on some Cal 25's. 67881
|
|
| Gooseneck Slide for 1" x 1/8" Flat Track & 1 1/2" Toggle w/ 1/4" Pin: K-1687XL: | |
|
Special SS Gooseneck Slide specially designed for use with Kenyon
K-10518-series
Gooseneck Toggle/Tack Assemblies. Slide fits standard 1" x 1/8" T-Track or SS Flat Track.
SS Gooseneck Slide is 3" high x (maximum) 1 1/8" wide and fits most 1 1/2" Toggles using a
1/4" vertical pin. Slide has heavy welded SS ring for attachment of downhaul line or
shackle and includes vertical bolt and locknut. Available on Special order.
|
|
| Bronze Gooseneck Slide for 1" x 1/8" Flat Track & 2 3/8" Toggle w/ 5/16" Pin: NF 10326-5A: | |
|
Chromed Bronze Gooseneck Slide fits 1" x 1/8" SS or Bronze Flat Track and standard 1" aluminum
T-Track. Cast Slide accepts a variety of Gooseneck Toggles up to 2 3/8" high with a 5/16" SS clevis pin
(included). Slide has integral loop for downhaul attachment and is 4" long x 1 7/8" wide.
Used with Nicro-Fico standard and Roller-Reefing Goosenecks. NM-320-5
|
|
| Bronze Gooseneck Slide for 1" x 1/8" Flat Track & 2 3/8" Toggle w/ 1/2" Pin: NF 10326-8A: | |
|
Chromed Bronze Gooseneck Slide fits 1" x 1/8" SS or Bronze Flat Track and standard 1" aluminum
T-Track. Cast Slide accepts a variety of Gooseneck Toggles up to 2 3/8" high with a 1/2" SS clevis pin
(included). Slide has integral loop for downhaul attachment and is 4" long x 1 7/8" wide.
Used with Nicro-Fico standard and Roller-Reefing Goosenecks. NM-320-8
|
|
|
|
|
| Gooseneck Slide for 1 1/4" x 3/16" Flat Track & 1" Toggle: K-1065: | |
|
SS Gooseneck Slide for 1 1/4" x 3/16" SS Flat Track (and standard 1 1/4" aluminum T-Track),
fits any gooseneck assembly using the standard Kenyon 1" Toggle,
K-1993, with a 1/4" bolt and locknut
(included). Slide has heavy welded SS ring for downhaul attachment. SS Slide is 3" long x 1 1/2" wide.
As used on some O'Day 25's, and others.
|
|
| Gooseneck Slide for 1 1/4" x 3/16" Flat Track & 1 1/2" Toggle: K-10430M: | |
|
Special SS Gooseneck Slide specially designed for use with Kenyon
K-10345-series Gooseneck Toggle/Tack
Assemblies. Slide fits 1 1/4" x 3/16" SS Flat Track (and Kenyon 1 1/4" Gooseneck Track,
as well as standard 1 1/4" aluminum T-Track). SS Gooseneck Slide is 4" high x (maximum) 1 1/2" wide
and fits most 1 1/2" Toggles using a 3/8" vertical pin or bolt. Slide has heavy welded SS
ring for attachment of downhaul line or shackle. As used on some Hunter 33's, and others.
|
|
| Bronze Gooseneck Slide for 1 1/4" x 3/16" Flat Track & 2 1/2" Toggle: Mer 4150-311B: | |
|
Chromed Bronze Gooseneck Slide fits 1 1/4" x 3/16" SS or Bronze Flat Track. Cast Slide accepts a
variety of Gooseneck Toggles up to 2 1/2" high with a 1/2" SS clevis pin (included).
Slide features recess underneath for use where Sailtrack (up to 5/8") is mounted on top of the
Gooseneck Slide Track. Slide has integral loop for downhaul attachment and is 4" long x 1 7/8" wide.
|
|
|
|
|
| Bronze Gooseneck Slide for 1 1/2" x 3/16" Flat Track & 2 1/2" Toggle: Mer 4150-321B: | |
|
Bronze Gooseneck Slide fits 1 1/2" x 3/16" SS or Bronze Flat Track. Cast Slide accepts a variety of
Gooseneck Toggles up to 2 1/2" high with a 1/2" SS clevis pin (included). Slide features recess
underneath for use where Sailtrack (up to 7/8") is mounted on top of the Gooseneck Slide Track.
Slide has integral loop for downhaul attachment and is 4" long x 1 7/8" wide.
|
|
|
|
|
| Bronze Gooseneck Slide for 1 1/2" x 1/4" Flat Track & 2 3/8" Toggle: Fam 1309SA: | |
|
Bronze Gooseneck Slide fits 1 1/2" x 1/4" SS or Bronze Flat Track. Heavy Cast Slide accepts a variety
of Gooseneck Toggles up to 2 3/8" high with a 1/2" SS clevis pin (included). Slide features
recess underneath for use where Sailtrack (up to 7/8") is mounted on top of the Gooseneck Slide Track.
Slide has integral loop for downhaul attachment and is 4 1/2" long x 2 1/8" wide.
|
|
|
|
|
| Bronze Gooseneck Slide for 2" x 1/4" Flat Track & 3 3/8" Toggle: Fam 1310SAB: | |
|
Bronze Gooseneck Slide fits 2" x 1/4" SS or Bronze Flat Track. Heavy Cast Slide accepts a variety of
Gooseneck Toggles up to 3 3/8" high with a 5/8" SS clevis pin (included).
Slide features recess underneath for use where Sailtrack (up to 1") is mounted on top of the Gooseneck
Slide Track. Slide has integral loop for downhaul attachment and is 6 3/8" long x 2 9/16" wide.
|
|
|
|
|
| Bronze Gooseneck Slide for 2" x 5/16" Flat Track & 2 3/8" Toggle: Fam 1310SAC: | |
|
Chrome Bronze Gooseneck Slide fits 2" x 5/16" SS or Bronze Flat Track. Heavy Cast Slide accepts a
variety of Gooseneck Toggles up to 2 3/8" high with a 1/2" SS clevis pin (included).
Slide features recess underneath for use where Sailtrack (up to 1") is mounted on top of the
Gooseneck Slide Track. Slide has integral loop for downhaul attachment and is 4 1/2"
long x 2 1/2" wide.
|
|
|
|
|
| Special Gooseneck Slides | |
|
Gooseneck Slide for 7/8" Internal SS "C" Track: K-R511S:
Special Gooseneck Slide to fit Nicro-Fico and Ronstan 7/8" SS "C" Track. Die-cast chromed Bronze assembly includes 1/4" Vertical Pin for attachment of Gooseneck Toggle up to 1 1/16" High. Slide features Spring Pin stop which is able to be locked in either up or down position, and has 3/16" hole for optional downhaul attachment. Slide is 3 1/4" long x (maximum) 7/8" wide. Commonly used with Gooseneck Toggle, Tack and Yoke Assembly, K-10604. As used on Etchells 22. RF511SX
|
 |
|
|
|
| Proctor Spars Gooseneck Slides | |
| Small Slide & Gooseneck Ass'y for Proctor Standard Boom: PRS 89-40ASG: | |
|
Special Small SS Gooseneck Slide Assembly to fit Proctor Dingy Masts with unmodified
track, and Booms with standard 1/2" Square hole in boom end. Investment Cast SS
Assembly features large captive Thumbscrew to allow for quick Boom height adjustment.
Slide is (maximum) 2 13/16" long x 5/8" (.600") wide. Waist is 5/32" wide x (minimum) 1/8" high.
* This item is no longer available and is shown here for identification only.
|
|
| Wide Slide & Gooseneck Ass'y for Proctor Standard Boom: PRS 89-44AWB: | |
|
Gooseneck Slide Assembly to fit Proctor Dingy Masts where integral Track has been spread to 5/8" wide,
and Booms with standard 1/2" Square hole in boom end. Investment Cast SS Assembly features
Ball & Socket Toggle arrangement and large Thumbscrew to allow for quick Boom height
adjustment. Slide is (maximum) 2 7/8" long x 7/8" (.850") wide. Waist is 9/16" wide x 1/4" (.240") high. asg
|
|
| Wide Slide & Gooseneck Ass'y for Proctor Standard Boom: PRS 89-45AWH: | |
|
Gooseneck Slide Assembly to fit Proctor Dingy Masts where integral Track has been spread
to 5/8" wide, and Booms with standard 1/2" Square hole in boom end. Investment
Cast SS Assembly features Special Heavy-Duty Toggle for maximum
articulation and large Thumbscrew to allow for quick Boom height adjustment. Slide is
(maximum) 3" long x 7/8" (.850") wide. Waist is 9/16" wide x 1/4" (.240") high. asg
|
|
| Wide Gooseneck Slide for Proctor Roller Reefing Boom: PRS 89-47SWRR: | |
|
Gooseneck Slide to fit Proctor Dingy Masts where integral Track has been spread to 5/8" wide,
and Booms with special 5/8" Vertical Pin. Investment Cast SS Slide has welded 5/8" ID vertical tube
to accept Special Roller Reefing Boom with 5/8" vertical attachment Pin. Slide features
large Thumbscrew to allow for quick Boom height adjustment. Slide is (maximum) 3 1/4" long
x 7/8" (.850") wide. Waist is 9/16" wide x 1/4" (.240") high. ws
|
|
| SS Slide w/ Thumbscrew for Proctor 3/4" Internal Track: PRS 89-48ATS: | |
|
SS Gooseneck Slide to fit Proctor Masts with 3/4" internal flat track has Thumbscrew to lock it in place.
Investment Cast SS Slide accepts a 3/4" high Toggle with a 3/8" vertical Pin. Slide is (maximum) 3"
long x 3/4" (.748") wide. Note: Short waist is 7/16" (.455") wide x 1/8" (.145")
high, and restricts usage on many Mast Sections.
|
|
|
SS Slide & Toggle Ass'y for Proctor 3/4" Internal Track: PRS 89-49AFT: SS Gooseneck Slide and Toggle Assembly to fit Proctor Masts with 3/4" internal flat track, and Booms requiring a 3/4" wide Toggle with a 3/8" horizontal Pin. Investment Cast SS Slide has 3/8" vertical Pin with Shackles for Tack and downhaul, and 3/4" square x 1 3/4" long Aluminum Toggle with 3/8" horizontal Pin (included) to fit a variety of Proctor Booms. Slide is (maximum) 3" long x 3/4" (.748") wide. Note: Short waist is 7/16" (.455") wide x 1/8" (.145") high, and restricts usage on many Mast Sections. ats
|
|
~ Home ~
