Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Z-Spar Deck Collars


Z-Spar uses a variety of cast aluminum Deck Collars. Many Deck Collars feature provisions for attachment of Blocks and Shackles using a variety of Bails, Pins, and threaded Studs with nuts, See: Z-Spar Mast Base Turning Blocks.

To order a Deck Collar not listed below please specify Mast Section, Deck Collar description and dimensions when inquiring.
See also, Z-Spar Mast Steps.
 

Deck Collar for Z601 & Z600E Masts: Z-1393:

Cast aluminum Deck Collar for use with Z601 and Z600E Mast Sections. Features (14) 10mm holes with nut slots for use with Z-275, Z-288, Z-301, or Z302 turning blocks and a 14mm hole on aft side for use with Deck Tie Rod. Deck Collar measures 13 3/8" (340mm) long x 10 1/4" (260mm) wide and fastens to deck with (4) 5/16" (8mm) FH screws. Maximum ID is 9" x 5 3/4".

 

Z-1174
Deck Collar for Z600E - Special Island Packet: Z-600E-CIP:

Special cast aluminum Deck Collar for Z600E keel stepped masts as used on Island Packet. Deck Collar measures 12 1/2" (317mm) long x  8 1/2" (215mm) wide and fastens to deck with (6) 1/4" (6mm) RH screws. Maximum ID is 9 5/8" x 6 1/8".

 

Deck Collar for Z700 & Z800 Masts: Z-1116X:

Cast aluminum Deck Collar for use with Z700 & Z800 Mast Sections. Features (10) 10mm holes with nut slots for use with Z-275, Z-288, Z-301, or Z302 turning blocks and aft slot for (optional) vang bail, Z-1590. Deck Collar measures 12 1/2" (317mm) long x 9 3/16" (235mm) wide and fastens to deck with (4) 5/16" (8mm) FH screws. Maximum ID is 9 3/4" x 6".

 

 

 

Vang Bail for Mast Step/Deck Collar - 10mm: Z-1590:

SS Formed Bail is used for attachment of Boom Vang. Fits in integral slot in aft side of select Mast Steps and Deck Collars. Bail is installed from underside of Casting, Deck Collar or Mast Step must be removed to install Bail. Bail is made from 10mm (3/8") rod, and is 2 3/4" (70mm) long x (maximum) 1 7/8" (48mm) high.

 

 

 

Deck Collar for Z700 - Z901 Masts: Z-1396:

Cast aluminum Deck Collar for use with Z700, Z701, Z800, Z900 & Z901 Mast Sections. Features (14) 10mm holes with nut slots for use with Z-275, Z-288, Z-301, or Z302 turning blocks and a 14mm hole on aft side for use with Deck Tie Rod. Deck Collar measures 13 3/8" (340mm) long x 10 1/4" (260mm) wide and fastens to deck with (4) 5/16" (8mm) FH screws. Maximum ID is 10 5/8" x 6 3/4".

 

Z-1174
Deck Collar for Z900E - Special Island Packet: Z-900E-CIP:
Special cast aluminum Deck Collar for Z900E keel stepped masts as used on Island Packet. Deck Collar measures 13" (330mm) long x 11" (280mm) wide and fastens to deck with (6) 1/4" (6mm) RH screws. Maximum ID is 10 7/8" x 7 3/8".

 


~ Back to Z-Spar Masts ~

~ Back to Z-Spar Main Page ~

~ Home ~