Nicro-Fico 1100 Traveller


NF 1100 Traveller Track
*NF 1100 Ball Bearing Traveller Track x 3': NF 1100-3:* *NF 1100 Ball Bearing Traveller Track x 4': NF 1100-4:* *NF 1100 Ball Bearing Traveller Track x 5': NF 1100-5:* *NF 1100 Ball Bearing Traveller Track x 8': NF 1100-8:* *NF 1100 Ball Bearing Traveller Track x 10': NF 1100-10:* NF 1100 Recirculating Ball Bearing Traveller Track is a Black hardcote anodized Aluminum Track that measures 15/16" (24mm) across the top, 1" (25mm) across the base and is 1/2" (13mm) high. Track is drilled for #10 FH Screws on 4" (102mm) centers and has 1/4" stop holes on 2" (51mm) centers. NF 1100 Traveller Track is available in 3 ft., 4 ft., 5 ft., 8 ft., and 10 ft. lengths.
*NF 1100 - Car Loader for Short Car: NF 1100-CL5:* *NF 1100 - Car Loader for Medium Car: NF 1100-CL6:* *NF 1100 - Car Loader for Long Car: NF 1100-CL8:* Short pieces of NF 1100 Recirculating Ball Bearing Traveller Track are used for Traveller Car loading and transport. This item is shipped with all NF 1100 Cars, used to transfer the Traveller Car to the Traveller Track, and to load the Ball Bearings. Car loading Tracks are 5", 6", and 8" long.

NF 1100 Traveller Cars NF 1100 Traveller Cars utilize 6.4 mm Torlon balls in dual recirculating races (on each side of the Car), and come in 3 lengths. Short (3 1/2"), Medium-length (4 9/16"), and Long (6 1/8") cars are available in a variety of configurations for ultimate strengths of 2800 lbs., 3500 lbs. & 4800 lbs. respectively. NF 1100 Traveller Cars are constructed of extruded aluminum alloy with removable plastic end caps for access to the Ball Bearings. As with all Recirculating Ball Traveller Cars, special precautions must be taken when removing them from the track. All Traveller Cars are shipped on Car Loaders, see above.
*Short Traveller Car w/ Eyestrap: NF 1102:* Short Recirculating Ball Traveller Car for NF 1100 Track features removable eyestrap for attachment to mainsheet block. Short Car is 3 1/2" (89mm) long with a maximum width of 2 3/8" (60mm), and has a safe working load of 1600 lbs..
*Short Traveller Car w/ 2 Control Sheaves: NF 1101:* Short Recirculating Ball Traveller Car for NF 1100 Track features 2 Control Sheaves and a removable eyestrap for attachment to mainsheet block. Short Car is 3 1/2" (89mm) long with a maximum width of 2 3/8" (60mm), and has a safe working load of 1600 lbs. As NF 1102, above, but with 2 Control Sheaves, this Car provides a 2-1 control purchase.
*Short Traveller Car w/ 2 Control Sheaves, Beckets & Cam Cleats: NF 1103:*
Short Recirculating Ball Traveller Car for NF 1100 Track features 2 Control Sheaves, 2 Beckets, 2 Cam Cleats and a removable eyestrap for attachment to mainsheet block. Short Car is 3 1/2" (89mm) long with a maximum width of 2 3/8" (60mm), and has a safe working load of 1600 lbs. Provides a 3-1 control purchase controllable directly from the Car.

*Medium Traveller Car w/ 2 Control Sheaves & Beckets: NF 1104:*
Medium length Recirculating Ball Traveller Car for NF 1100 Track features 2 Control Sheaves, 2 Beckets, and a removable Pivoting shackle for attachment to mainsheet block. Medium length Car is 4 9/16" (116mm) long with a maximum width of 2 3/8" (60mm), and has a safe working load of 2000 lbs. Provides a 3-1 control purchase.
*Medium Traveller Car w/ 2 Control Sheaves, Beckets & Cam Cleats: NF 1105:*
Medium length Recirculating Ball Traveller Car for NF 1100 Track features 2 Control Sheaves, 2 Beckets, 2 Cam Cleats and a removable eyestrap for attachment to mainsheet block. Medium length Car is 4 9/16" (116mm) long with a maximum width of 2 3/8" (60mm), and has a safe working load of 2000 lbs.. Provides a 3-1 control purchase controllable directly from the Car.

*Long Traveller Car w/ 2 Control Sheaves & Beckets: NF 1106:*
Long Recirculating Ball Traveller Car for NF 1100 Track features 2 Control Sheaves, 2 Beckets, and a removable Pivoting shackle for attachment to mainsheet block. Long Car is 6 1/8" (155mm) long with a maximum width of 2 3/8" (60mm), and has a safe working load of 2900 lbs.. Provides a 3-1 control purchase.
*Long Traveller Car w/ 4 Control Sheaves & Beckets: NF 1107:*
Long Recirculating Ball Traveller Car for NF 1100 Track features 4 Control Sheaves, 2 Beckets, and a removable Pivoting shackle for attachment to mainsheet block. Long Car is 6 1/8" (155mm) long with a maximum width of 2 3/8" (60mm), and has a safe working load of 2900 lbs.. Provides a 4-1 or 5-1 control purchase.

NF 1100 Traveller Car Parts
*Ball Bearing Pack for NF 1100 Short Cars: NF 1121-S:* *Car Loader for NF 1100 Short Cars: NF 1100-CL5:*
Replacement ball bearing pack for NF 1100 Short (3 1/2") Cars contains forty-four (44) 6.4 mm Torlon ball bearings. Loading and transport Track as included with all Short Traveller Cars is 5" long.
*Ball Bearing Pack for NF 1100 Medium Cars: NF 1121-S:* *Car Loader for NF 1100 Medium Cars: NF 1100-CL6:*
Replacement ball bearing pack for NF 1100 Medium (4 1/2") Cars contains sixty (60) 6.4 mm Torlon ball bearings. Loading and transport Track as included with all Medium Traveller Cars is 6" long.
*Ball Bearing Pack for NF 1100 Long Cars: NF 1121-S:* *Car Loader for NF 1100 Long Cars: NF 1100-CL8:*
Replacement ball bearing pack for NF 1100 Long (6 1/8") Cars contains eighty-eight (88) 6.4 mm Torlon ball bearings. Loading and transport Track as included with all Long Traveller Cars is 8" long.
*Car End Cap Pair for NF 1100 Cars: NF 3787P:* Replacement Car End Cap Pair (2 pcs.) for NF 1100 Traveller Cars. New Style Heavy-duty black plastic End Caps replace earlier 'soft' version.

NF 1100 Traveller Ends & Stops
*Plastic Track End: NF 1119:* Molded plastic Track End for NF 1100 Track covers track end and attaches to deck with (2) #10 (3/16") RH screws. Extends 1 1/4" beyond track end. This item is no longer available, having been replaced by the NF 1119-1.
*Plastic Track End: NF 1119-1:* Track End for NF 1100 Track covers track end and attaches to Track w/ (1) 1/4" FH screw. New-style End Stop extends only 1/4" beyond track end and covers last 1 1/16" of Track. Black Molded delrin End Stop is 1 5/16" wide x 1 3/8" long.
*Adjustable Track Stop: NF 1118:* Adjustable Track Stop for NF 1100 Track features SS Spring Pin and plastic bumpers to cushion car impact. Used on free-floating car systems without end controls, especially for jib and staysail boom Travellers. Adjustable Track Stop is 2 1/8" (54mm) long with a maximum width of 2 3/8" (60mm).

NF 1100 Traveller Control Ends Control Ends for NF 1100 Travellers are designed to mount on the Track itself. In cockpits, it is also common to use blocks mounted on the cockpit sides for controls. Track-mount Control Ends are available in a variety of configurations with or without cam cleats for 2-1, 3-1, and 4-1 purchase systems. As the Track-mount Control Ends do not cover the end of the track, they are normally used with NF 1119 Track Ends (above), which do. For maximum adjustment control ends should be mounted as far apart as possible.
*Single Sheave, Track-mount Control End w/ Cam Cleat & Becket - Left: NF 1109L:* *Single Sheave, Track-mount Control End w/ Cam Cleat & Becket - Right: NF 1109R:*
For 2-1 purchase systems. Extruded Aluminum Ends with plastic bumpers slide onto track and are held in place by the long center bolt which goes through track and deck. Control line dead-ends on Becket, goes around sheave on Car, then around Control End Sheave and through cam cleat. Unit is 3" long x 2 5/16" wide.
*Single Sheave, Track-mount Control End w/ Becket: NF 1113:* For 2-1 purchase systems with cleats mounted separately. Extruded Aluminum Ends with plastic bumpers slide onto track and are held in place by the long center bolt which goes through track and deck. Control line dead-ends on Becket, goes around sheave on Car, then comes back around Control End Sheave to separate cleat. Unit is 3" long x 2 5/16" wide.
*Double Sheave, Track-mount Control End w/ Cam Cleat & Becket - Left: NF 1111L:* *Double Sheave, Track-mount Control End w/ Cam Cleat & Becket - Right: NF 1111R:*
For 3-1 or 4-1 purchase systems. Extruded Aluminum Ends with plastic bumpers slide onto track and are held in place by the long center bolt which goes through track and deck. For 3-1 systems Control line dead-ends on Becket on Car, goes around upper Control End Sheave, back through the Sheave on the Car, then around lower Control End Sheave and through Cam Cleat. For 4-1 systems Control line dead-ends on Control End Becket, goes around upper Sheave on Car, back around upper Control End Sheave, back through lower Sheave on Car, then around lower Control End Sheave and through Cam Cleat. Unit is 3" long x 2 5/16" wide.
*Double Sheave, Track-mount Control End w/ Becket: NF 1114:* For 3-1, or 4-1 purchase systems with cleats mounted separately. Extruded Aluminum Ends with plastic bumpers slide onto track and are held in place by the long center bolt which goes through track and deck. For 3-1 systems Control line dead-ends on Becket on Car, goes around upper Control End Sheave, back through the Sheave on the Car, then around lower Control End Sheave to separate cleat. For 4-1 systems Control line dead-ends on Control End Becket, goes around upper Sheave on Car, back around upper Control End Sheave, back through lower Sheave on Car, then around lower Control End Sheave to separate cleat. Unit is 3" long x 2 5/16" wide.

Special Purpose Cars
*Twin-Sheet Genoa Lead Car: NF 1122:* Long Recirculating Ball Twin-Sheet Genoa Car for NF 1100 Track features wide 2 1/4" OD Delrin Sheave for use with 2 sheets up to 1/2" diameter. Spring loaded SS Sheave housing pivots sideways and fore and aft. Wide Delrin Sheave accepts passage of J-Lock snap shackle. Car has 2 Towing Bails for positioning with control lines, or can be positioned with NF 1118 Adjustable Stops. Long Car is 6 1/8" (155mm) long with a maximum width of 2 3/8" (60mm), and has a safe working load of 1500 lbs..
Genoa Lead Car: NF 1123: Long Recirculating Ball Genoa Car for NF 1100 Track features large 3" OD Aluminum Sheave for use with sheets up to 1/2" diameter. Spring loaded Sheave housing pivots sideways and fore and aft. Aluminum Sheave has ball bearings to reduce side loads and a special flat groove for use with all modern line types. Car has 2 Towing Bails for positioning with control lines, or can be positioned with NF 1118 Adjustable Stops. Long Car is 6 1/8" (155mm) long with a maximum width of 2 3/8" (60mm), and has a safe working load of 2000 lbs..
*Outhaul Car: NF 1184:* Special length Recirculating Ball Outhaul Car for NF 1100 Track provides high strength and low friction at a minimum weight. SS channel allows for 3 Clew positions and 2 Outhaul Pennant positions with 1/4" pins and has 5/8" inside clearance for clew rings. Car is (maximum) 2 3/4" (70mm) long x 2 3/8" (60mm) wide x 2 3/8" (60mm) high (from track surface), and has a safe working load of 1200 lbs.. Outhaul Car uses thirty-six (36) 6.4mm Torlon ball bearings. Suitable for use on most boats up to 30'.
*Spinnaker Car w/ Towing Bails: NF 1182:* Medium length Recirculating Ball Spinnaker Car for NF 1100 Track features a large SS Ring for use with Piston and Trigger Pole Ends and Towing Bails for attachment of positioning lines. Medium length Car is 4 9/16" (116mm) long with a maximum width of 2 3/8" (60mm), and has a safe working load of 2000 lbs..

Your cart

Spars, Rigging, and Hardware for Sailboats