Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com         Ordering/Questionsp

Deck Cleats


Deck Cleats
Cleats are used to tie off a line (halyards, reef lines, etc.), wherever needed.
Deck Cleats are designed for attachment to the Deck or other flat surface, generally having both a wide base attaching with 4 screws, and a hole in the base so a spliced eye can be run through it and slipped over the Cleat.

Rig-Rite stocks a large selection of Deck Cleats. Common ones are listed below.
Many 2 screw Spar Cleats are also used on Deck, See Spar Cleats.
Bronze Deck Cleats are listed separately, See Bronze Cleats.

If you require Cleats not listed, please forward a sketch or photo of your Cleat with measurements, hole spacing (to centers), full details of the part, boat model and year.

See also: Spar Cleats, Jam Cleats, Bronze Cleats and Cleats Main Page.

 



4" Deck Cleats
5" Deck Cleats
5 1/2" Deck Cleats
6" Deck Cleats
7" Deck Cleats
8" Deck Cleats
10" Deck Cleats
 
12" Deck Cleats
14" Deck Cleats
16" Deck Cleats

Goiot 2-screw Deck Cleats

Cleat Backing Plates


 4" Deck Cleats
Deck Cleat - 4" long, Black: Sch 70-04X:

Cast Aluminum Deck Cleat is a low-profile design for use with line up to 3/8" diameter. Black epoxy coated Cleat is 4" long, and fastens to Deck with (4) 3/16" (#10) FH screws on 1" (fore and aft) x 1 1/16" (athwartships) hole centers. - Limited Availability.

 

 

 5" Deck Cleats
Deck Cleat - 5" long, Black: Sch 70-05X:

Cast Aluminum Deck Cleat is a low-profile design with a narrow base suitable for use with line up to 3/8" diameter. Black epoxy coated Cleat is 5" long, and fastens to Deck with (4) 7/32" (#12) FH screws on 1 1/4" (fore and aft) x 1 3/8" (athwartships) hole centers. - Limited Availability.

 

 
Deck Cleat - 5" long, Black: K-10345D:

Cast Aluminum Deck Cleat is a low-profile design with a narrow base suitable for use with line up to 7/16" diameter. Black epoxy coated Cleat is 5" long, and fastens to Deck with (4) 7/32" (#12) FH screws on 1 1/2" (fore and aft) x 1 3/8" (athwartships) hole centers. - Limited Availability.   D-

 

Deck Cleat - 5" long, Silver: WC 14051-5C:

Original Wilcox-Crittenden Cast Marinium Deck Cleat is a low-profile design for use with line up to 7/16" diameter. Cleat is 5" long x (maximum) 2 1/4" wide, and fastens to Deck with (4) #12 (7/32") FH screws on 1 1/4" (fore and aft) x 1 1/2" (athwartships) hole centers. - Limited Availability.

 

 

 5 1/2" Deck Cleats
Deck Cleat - 5 1/2" long, Black: SP-191:

Cast Aluminum Deck Cleat is a low-profile design suitable for use with line up to 7/16" diameter. Black epoxy coated Cleat is 5 1/2" long, and fastens to Deck with (4) 1/4" FH screws on 1 1/2" (fore and aft) x 1 3/4" (athwartships) hole centers. As used on a variety of Cape Dory Yachts.

 

 

 6" Deck Cleats
Deck Cleat - 6" long, Black: Sch 70-06:

Deck Cleat - 6" long, Silver: Sch 60-06:

Cast Aluminum Deck Cleat is a low-profile design for use with line up to 1/2" diameter. Anodized Cleat is 6" long, and fastens to Deck with (4) 1/4" FH screws on 1 1/2" (fore and aft) x 1 3/4" (athwartships) hole centers.

 

Deck Cleat - 6" long, Silver: WC 14051-6C:

Original Wilcox-Crittenden Cast Marinium Deck Cleat is a low-profile design for use with line up to 7/16" diameter. Cleat is 6" long x (maximum) 2 1/2" wide, and fastens to Deck with (4) 1/4" FH screws on 1 1/2" (fore and aft) x 1 13/16" (athwartships) hole centers. - Limited Availability.

 

Jam Cleat - 6" long, C&C Black Composite: CC Cleat-6J:
 
C&C Special Deck/Jam Cleat is a low-profile design with a wide base suitable for use with line up to 1/2" diameter. Molded Black Composite Jam Cleat is 6 3/16" long x 1 3/16" wide x 7/8" high, and fastens to Deck with (2) 1/4" FH screws on 1 1/2" (38mm) centers. Used for Jib sheets on a variety of C&C Yachts, Original Equipment Cleat is marked C&C Yachts.

 

CC Cleat-6J Jam Cleat Photo
CC Cleat-6J

 7" Deck Cleats
Deck Cleat - 7" long, Silver: WC 14051-7C:
Original Wilcox-Crittenden Cast Marinium Deck Cleat is a low-profile design with a narrow base suitable for use with line up to 1/2" diameter. Cleat is 7" long x (maximum) 2 7/8" wide, and fastens to Deck with (4) 5/16" FH screws on 1 3/4" (fore and aft) x 2" (athwartships) hole centers. H   This item is no longer available and is shown here for identification only.

 

X
Deck Cleat - 7" long, 175mm Silver Metric: PF 60-07MG:

Highly polished Aluminum Deck Cleat is a low-profile design suitable for use with line up to 5/8" diameter. Cleat is 7" long x (maximum) 2 5/8" wide, and fastens to Deck with (4) 6mm FH screws on 43mm (1 11/16") (fore and aft) x 47mm (1 7/8") (athwartships) hole centers. Made in Germany.

 

 

 8" Deck Cleats
Deck Cleat - 8" long, Black: Sch 70-08:

Deck Cleat - 8" long, Silver: Sch 60-08:

Cast Aluminum Deck Cleat is a low-profile design for use with line up to 3/4" diameter. Anodized Cleat is 8" long, and fastens to Deck with (4) 5/16" FH screws on 2" (fore and aft) x 2" (athwartships) hole centers.

 

 

 10" Deck Cleats
Deck Cleat - 10" long, Black: Sch 70-10:

Deck Cleat - 10" long, Silver: Sch 60-10:

Cast Aluminum Deck Cleat is a low-profile design for use with line up to 7/8" diameter. Anodized Cleat is 10" long, and fastens to Deck with (4) 3/8" FH screws on 2 1/2" (fore and aft) x 2 1/2" (athwartships) hole centers.

 

Deck Cleat - 10" long, Silver: Vas CL4-10C:

Highly polished Aluminum Deck Cleat is a low-profile design suitable for use with line up to 3/4" diameter. Cleat is 10" long x (maximum) 3 3/4" wide, and fastens to Deck with (4) 1/4" FH screws on 2 7/8" (fore and aft) x 2 1/2" (athwartships) hole centers. Made in Holland by Vassen. - Limited Availability. 

 

 

 12" Deck Cleats
Deck Cleat - 12" long, Silver: WC 14051-12C:

Original Wilcox-Crittenden Cast Marinium Deck Cleat is a low-profile design suitable for use with line up to 7/8" diameter. Cleat is 12" long x (maximum) 4 1/8" wide, and fastens to Deck with (4) 3/8" FH screws on 2 1/2" (fore and aft) x 3" (athwartships) hole centers. - Limited Availability. 

 

Deck Cleat - 12" long, Silver: Vas CL4-12C:

Highly polished Aluminum Deck Cleat is a low-profile design suitable for use with line up to 7/8" diameter. Cleat is 12" long x (maximum) 4 1/2" wide, and fastens to Deck with (4) 8mm (5/16") FH screws on 3 3/8" (fore and aft) x 3" (athwartships) hole centers. Made in Holland by Vassen. - Limited Availability. 

 

 

 14" Deck Cleats
Deck Cleat - 14" long, Silver: Vas CL4-14C:

Highly polished Aluminum Deck Cleat is a low-profile design suitable for use with line up to 7/8" diameter. Cleat is 14" long x (maximum) 5" wide, and fastens to Deck with (4) 10mm (3/8") FH screws on 90mm (3 9/16") (fore and aft) x 90mm (3 9/16") (athwartships) hole centers. Made in Holland by Vassen. - Limited Availability.

 

 

 16" Deck Cleats
Deck Cleat - 16" long, Silver: Vas CL4-16C:
Highly polished Aluminum Deck Cleat is a low-profile design suitable for use with line up to 7/8" diameter. Cleat is 16" long x (maximum) 5 5/8" wide, and fastens to Deck with (4) 10mm (3/8") FH screws on 4 3/8" (fore and aft) x 3 7/8" (athwartships) hole centers. Made in Holland by Vassen. - Limited Availability.

 

 

 Goiot (Metric) 2-screw Deck Cleats

Deck Cleat - 160mm long, for FH Screws: Goi 103897:

Deck Cleat - 160mm long, Threaded 6mm: Goi 103929T:

Highly polished Aluminum 2-screw Deck Cleat is suitable for use with line up to 5/8" diameter. Cleat is 160mm (6 1/4") long x 22mm (7/8") (maximum) wide, and fastens to Deck with (2) 6mm FH screws on 35mm (1 3/8") hole centers.
T - Threaded cleats are identical, but smooth on top and fastened from underdeck with Metric screws.

 

Goi 103897 Photo
Goi 103897

Goi 103929T Photo
Goi 103929T

Deck Cleat - 200mm long, for FH Screws: Goi 103927:

Deck Cleat - 200mm long, Threaded 8mm: Goi 103930T:

Highly polished Aluminum 2-screw Deck Cleat is suitable for use with line up to 7/8" diameter. Cleat is 200mm (8") long x 25mm (1") (maximum) wide, and fastens to Deck with (2) 8mm FH screws on 50mm (2") hole centers.
T - Threaded cleats are identical, but smooth on top and fastened from underdeck with Metric screws.

 

Goi 103927 Photo
Goi 103927

Goi 103930T Photo
Goi 103930T

Deck Cleat - 260mm long, for FH Screws: Goi 103898:

Deck Cleat - 260mm long, Threaded 8mm: Goi 103943T:

Highly polished Aluminum 2-screw Deck Cleat is suitable for use with line up to 1" diameter. Cleat is 260mm (10 1/4") long x 32mm (1 1/4") (maximum) wide, and fastens to Deck with (2) 8mm FH screws on 65mm (2 9/16") hole centers.
T - Threaded cleats are identical, but smooth on top and fastened from underdeck with Metric screws.

 

Goi 103898 Photo
Goi 103898

Goi 103943T Photo
Goi 103943T

Deck Cleat - 330mm long, for FH Screws: Goi 103899:

Deck Cleat - 330mm long, Threaded 10mm: Goi 103944T:

Highly polished Aluminum 2-screw Deck Cleat is suitable for use with line up to 1 1/4" diameter. Cleat is 330mm (12 3/4") long x 35mm (1 3/8") (maximum) wide, and fastens to Deck with (2) 10mm FH screws on 80mm (3 1/8") hole centers.
T - Threaded cleats are identical, but smooth on top and fastened from underdeck with Metric screws.

 

Goi 103899 Photo
Goi 103899

Goi 103944T Photo
Goi 103944T

Deck Cleat - 450mm long, for FH Screws: Goi 103900:

Deck Cleat - 450mm long, Threaded 10mm: Goi 103928T:

Highly polished Aluminum 3-screw Deck Cleat is suitable for use with line up to 1 1/2" diameter. Cleat is 450mm (17 3/4") long x 50mm (2") (maximum) wide, and fastens to Deck with (3) 10mm FH screws on 75mm (2 15/16") hole centers.
T - Threaded cleats are identical, but smooth on top and fastened from underdeck with Metric screws.

 

Goi 103900 Photo
Goi 103900

Goi 103928T Photo
Goi 103928T

 Cleat Backing Plates  

Cleat Backing Plate, Aluminum: RR 70-BP1:

Anodized Aluminum Cleat Backing Plate is suitable for use with Cleats with up to 3/8" fasteners and up to 2 3/8" hole centers. Backing Plate is 3 1/2" long x 1" wide x 1/8" thick, and has (2) slots (3/8" x 1") on 1 5/8" centers. Suitable for use with many Spar and Jam Cleats, most Deck Cleats will require two (2) pieces.

~ Back to Cleats Main Page ~

~ Back to Hardware Main Page ~

~ Home ~