Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com         Ordering/Questionsp

Jam Cleats


Jam Cleats
Cleats are used to tie off a line (halyards, reef lines, sheets, etc.), wherever needed.
Jam Cleats are generally similar to Spar Cleats (a narrow base attaching with 2 screws) but with an extended foot with a V-Groove on one side designed to wedge the line as tension is applied. They generally also have a hole in the base so the line can be run through it and knotted, preventing the line from getting away. They are commonly used for Jib Sheets.

Rig-Rite stocks a variety of Jam Cleats. Common ones are listed below.
Bronze Jam Cleats are listed separately, See Bronze Cleats.

If you require Jam Cleats not listed, please forward a sketch or photo of your Cleat with measurements, hole spacing (to centers), full details of the part, boat model and year.

See also: Spar Cleats, Deck Cleats, Bronze Cleats. and Cleats Main Page.

 


 
4" Jam Cleats
5" Jam Cleats
6" Jam Cleats
European-style (Metric) Jam Cleats

Cleat Backing Plates


 4" Jam Cleats
Jam Cleat - 4" long, Black: Sch 70-78:

Jam Cleat - 4" long, Silver: Sch 60-78:

Cast Aluminum Jam Cleat is a low-profile design with a narrow base suitable for use with line up to 5/16" diameter. Black, or Clear Anodized Cleat is 4" long, and fastens to spar with (2) 3/16" (#10) FH screws on 1 1/16" centers.

 

 

 5" Jam Cleats
Jam Cleat - 5" long, Black: Sch 70-79:

Jam Cleat - 5" long, Silver: Sch 60-79:

Cast Aluminum Jam Cleat is a low-profile design with a narrow base suitable for use with line up to 3/8" diameter. Black, or Clear Anodized Cleat is 5" long, and fastens to spar with (2) 7/32" (#12) FH screws on 1 5/16" centers.

 


 6" Jam Cleats
Jam Cleat - 6" long, Black: Sch 70-80:

Jam Cleat - 6" long, Silver: Sch 60-80:

Cast Aluminum Jam Cleat is a low-profile design with a narrow base suitable for use with line up to 1/2" diameter. Black, or Clear Anodized Cleat is 6" long, and fastens to spar with (2) 1/4" FH screws on 1 1/2" centers.

 

Jam Cleat - 6" long, C&C Black Composite: CC Cleat-6J:
 
C&C Special Jam Cleat is a low-profile design with a wide base suitable for use with line up to 1/2" diameter. Molded Black Composite Jam Cleat is 6 3/16" long x 1 3/16" wide x 7/8" high, and fastens to Deck with (2) 1/4" FH screws on 1 1/2" (38mm) centers. Used for Jib sheets on a variety of C&C Yachts, Original Equipment Cleat is marked C&C Yachts.

 


 European-style Jam Cleats

Jam Cleat - 150mm (6") long, Silver: PP 70-150MC:

Cast Aluminum Jam Cleat is a low-profile design suitable for use with line up to 1/2" (12mm) diameter. Highly polished, Clear Anodized Cleat is 150mm (6") long, 35mm (maximum) wide x 25mm high, and fastens to spar or Deck with (2) 6mm FH screws on 45mm centers. Goiot 103932

 


Jam Cleat - 180mm (7") long, Silver: PP 70-180MC:

Cast Aluminum Jam Cleat is a low-profile design suitable for use with line up to 5/8" (16mm) diameter. Highly polished, Clear Anodized Cleat is 180mm (7 1/8") long, 40mm (maximum) wide x 30mm high, and fastens to spar or Deck with (2) 8mm FH screws on 45mm centers. Goiot 103933

 



 Cleat Backing Plates

Cleat Backing Plate, Aluminum: RR 70-BP1:

Anodized Aluminum Cleat Backing Plate is suitable for use with Cleats with up to 3/8" fasteners on from 7/8" up to 2 3/8" hole centers. Backing Plate is 3 1/2" long x 1" wide x 1/8" thick, and has (2) slots (3/8" x 1") on 1 5/8" centers. Suitable for use with all Cleats on this page.

~ Back to Cleats Main Page ~

~ Back to Hardware Main Page ~

~ Home ~