Schaefer Type 2 Aluminum Rope Clutches

Schaefer Type 2 (Aluminum) Rope Clutches The Schaefer 2nd generation Clutch (Halyard or Sheet Stopper, or Line Jammer), known as the EGR (Easy Grip & Release), was introduced in 1983. It featured all aluminum (black anodized) construction, except for S.S. bolts and springs. It was also available in 2 sizes: the smaller handled line 1/4"-3/8", the larger 3/8"-1/2". Both sizes were commonly available as single units, or in banks of two or three. Originally these units had color-coded plastic-tipped handles, but later on the handles were anodized in different colors and had no plastic tips (much less gooey in the hot sun). Although they gripped and released easily, under extreme loads they didn't hold as well as the First generation units. The EGR (Type 2) Clutches were produced from 1983-1993. A limited supply of these items are still available. To determine which Size of Type 2 Rope Clutch you have, measure the handle width (3/8" or 5/8"). Except for the Replacement Handles listed below, no other parts are available for these units. Schaefer Type 2 Small Rope Clutches (1/4"-3/8" Line) Schaefer Type 2 Large Rope Clutches (3/8"-1/2" Line)

Schaefer Type 2 Rope Clutches - Small (1/4"-3/8" line)
*Schaefer Type 2 Small - Single Rope Clutch: Sch 71-41X:* Schaefer Type 2 Small Aluminum Single Rope Clutch is designed for use with line from 1/4"-3/8" (6-10mm) diameter. Attaches to Deck with (2) #10 (3/16" or 5mm) FH screws on 3 3/4" centers. Base is (maximum) 4 1/2" long x 3/4" wide. Unit is (maximum) 3 1/8" high (with handle down). Suitable for most applications on boats to 28' LOA.
*Schaefer Type 2 Small - Double Rope Clutch: Sch 71-42X:* Schaefer Type 2 Small Aluminum Double Rope Clutch is designed for use with line from 1/4"-3/8" (6-10mm) diameter. Attaches to Deck with (4) #10 (3/16" or 5mm) FH screws on 3 3/4" (fore and aft) x 5/8" (athwartships) centers. Base is (maximum) 4 1/2" long x 1 3/8" wide. Unit is (maximum) 3 1/8" high (with handle down). Suitable for most applications on boats to 28' LOA. This item is no longer available and is shown here for identification only.
*Schaefer Type 2 Small - Triple Rope Clutch: Sch 71-43X:* Schaefer Type 2 Small Aluminum Triple Rope Clutch is designed for use with line from 1/4"-3/8" (6-10mm) diameter. Attaches to Deck with (6) #10 (3/16" or 5mm) FH screws on 3 3/4" (fore and aft) x 5/8" and 1 1/4" (athwartships) centers. Base is (maximum) 4 1/2" long x 2" wide. Unit is (maximum) 3 1/8" high (with handle down). Suitable for most applications on boats to 28' LOA. This item is no longer available and is shown here for identification only.
	*Schaefer Type 2 Small Handle: Sch 71-41XH:* Schaefer Type 2 Small Aluminum Replacement Handle. For use with all Schaefer Type 2 Small Rope Clutches. Anodized Handle is (maximum) 3 3/4" long x 3/8" wide. Limited color selection.

Schaefer Type 2 Rope Clutches - Large (3/8"-1/2" line)
*Schaefer Type 2 Large - Single Rope Clutch: Sch 71-61X:* Schaefer Type 2 Large Aluminum Single Rope Clutch is designed for use with line from 3/8"-1/2" (9-13mm) diameter. Attaches to Deck with (2) 1/4" (6mm) FH screws on 3 3/4" centers. Base is (maximum) 4 1/2" long x 1" wide. Unit is (maximum) 3 1/4" high (with handle down). Suitable for most applications on boats to 35' LOA. This item is no longer available and is shown here for identification only.
*Schaefer Type 2 Large - Double Rope Clutch: Sch 71-62X:* Schaefer Type 2 Large Aluminum Double Rope Clutch is designed for use with line from 3/8"-1/2" (9-13mm) diameter. Attaches to Deck with (4) 1/4" (6mm) FH screws on 3 3/4" (fore and aft) x 7/8" (athwartships) centers. Base is (maximum) 4 1/2" long x 1 7/8" wide. Unit is (maximum) 3 1/4" high (with handle down). Suitable for most applications on boats to 35' LOA. This item is no longer available and is shown here for identification only.
*Schaefer Type 2 Large - Triple Rope Clutch: Sch 71-63X:* Schaefer Type 2 Large Aluminum Triple Rope Clutch is designed for use with line from 3/8"-1/2" (9-13mm) diameter. Attaches to Deck with (6) 1/4" (6mm) FH screws on 3 3/4" (fore and aft) x 7/8" and 1 3/4" (athwartships) centers. Base is (maximum) 4 1/2" long x 2 3/4" wide. Unit is (maximum) 3 1/4" high (with handle down). Suitable for most applications on boats to 35' LOA. This item is no longer available and is shown here for identification only.
	*Schaefer Type 2 Large Handle: Sch 71-61XH:* Schaefer Type 2 Large Aluminum Replacement Handle. For use with all Schaefer Type 2 Large Rope Clutches. Anodized Handle is (maximum) 3 3/4" long x 5/8" wide. Limited color selection.

Your cart

Spars, Rigging, and Hardware for Sailboats