Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
 Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com         Ordering/Questions

Pearson 386 Mast Assembly - NG-60
Isomat NG-60 Mast
Measurements (OD): 8.07" x 5.39"   (205mm x 137mm)
Wall Thickness (minimum): .137"   (3.5mm)
Weight/ft.: 4.03 lbs.   Weight/M: 6.01 kg
Moments of inertia: Ixx = 26.43", Iyy = 12.73"
Moments of inertia: Ixx = 1100cm4, Iyy = 530cm4
Circumference: 22 1/8"   (562mm)
Alloy: 6061-T6
Sail slides: 15/16" flat slides (A008M)
Common Mast usage: A variety of boats from 33' to 40'.

**** Pearson 386 Mast Assembly is IN Stock.

 NG-60 Mast Section
Pearson 386's were produced using the Isomat NG-60 Mast Section.
Factory original Parts used on the Isomat Mast for the Pearson 386 are listed here.
For additional data and Parts for this Mast, See Isomat NG-60 Mast Section.
 
Pearson 386 Mast Assembly - NG-60

Factory original Keel-stepped Pearson 386 Mast Assembly includes:

Tapered NG-60 x 55' 6" tube length with Clear Anodized finish.
Welded Masthead - NG2-1AC - NG2 Masthead Rig.
Welded Spreader Bases - BF4-35 @ 32' 11 1/2"
Exit Plate, Starboard - NG2-7S4 @ 18' 4 1/2"
Exit Plate, Port - NG2-7S4 @ 15' 5"
Mainsail Gate - NG2-9K @ 14' 7 1/4"
Gooseneck Bracket - NG2-11 @ 12' 7 1/2"
Winch Pads, side - (2) NG60-20 @ 11' 10 1/2"
Winch Pad, aft - NG60-21  bottom @ 11'
Cleats - (2) NGC-8 @ 10' 10 1/2"
Electrical Conduit - (2) - 1 piece to Spreaders, 1 piece to Masthead.
For additional details on these Parts, and other Parts for this Mast, See Isomat NG-60 Mast Section.

BF4 Spreaders are Not Included. See BF-4 Spreaders.
NG-60 Mast Step is Not Included. See Isomat NG-60 Mast Section for options.
Boom is Not Included, but Gooseneck Bracket is compatible with Isomat NB-32, NB-40, NB-55 and, with minor modification, Sparcraft Booms, FB-220 and larger.
 

~ Home ~

~ Home ~