Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions
Boston Whaler Harpoon 6.2
Standard Spars & Parts
Common Replacement Parts are listed below.
Additional specifications and photographs of all components listed below, as well as details of the Spar Sections and additional parts, are available on the Spar Section, or Parts pages.

Harpoon 6.2 Masts now use the Kenyon 2740 Mast Section w/ Internal Halyards,
        though early models used the Kenyon E Mast Section.
Harpoon 6.2 Booms now use the Kenyon 2331 Boom.
        though early models used the Kenyon D Section. See Kenyon D Boom Section for Parts.
Harpoon 6.2 Spreaders now use the Kenyon SP-2.2 Spreader Section.
Harpoon 6.2 Mast and Components - Kenyon 2740 Mast Section
Description Part #
Harpoon 6.2 Mast Assembly - 2740 Section w/ SP-2.2 Spreaders : K-FM612A:
      - Clear Anodized
Harpoon 6.2 Mast Kit - 2740 Section x 26' 3" w/ Gate milled, all : K-FMK612A:
        Hardware and SP-2.2 Spreaders - Clear Anodized
Harpoon 6.2 Mast Tube - 2740 Section x 26' 3" w/ gate milled - : K-FMT612A:
        - Clear Anodized - (4" Gate @ 2'2")
Masthead Assembly - Inset Channel : K-10584:
Masthead Cap - for Inset Channel Masthead : K-10569:
Main Halyard Sheave - Aluminum w/ BZ Bush. 1 3/4" OD 1/4" ID : K-198-7AB4:
Main halyard sheave Axle - Clevis Pin 1/4" : CP4-26K:
Shroud Tang (4 required) : K-363B:
Jib/Spinnaker Halyard Block w/ Forestay Attachment : K-84030:
Pole Lift Exit Block - Aluminum Sheave : K-11110A-1:
Spinnaker Pole Mast Eye : K-10562:
Mainsail Gate & Thumb Screw : K-1807K:
Gooseneck Bracket SS – for 1" Toggle : K-10567:
Gooseneck Toggle SS : K-1993:
Eyestrap for Cunningham - Starboard (1 required) : K-226:
4" Cleat - for Cunningham - Port (1 required) : D-10324:
Vang Bail Padeye (SS) for Mast : K-2114:
Four-sheave Exit Block Ass'y for Mast Step : K-10940:
Mast Step Casting only (fully machined) : K-10941:
Mast Step Hinge Plate Assembly - K-1374 : K-1374:
Mast Step Halyard Organizer Plate - fits under K-1374 : K-1374HP:
Pin only for Mast Step Hinge Plate Ass'y - 3/8" : K-9518:
Harpoon 6.2 Spreaders and Components - Kenyon SP-2.2 Spreader
Description Part #
SP-2.2 Port Spreader Ass'y - Clear Anodized 27"@20° : K-FS612AP:
SP-2.2 Starboard Spreader Ass'y - Clear Anodized : K-FS612AS:
SP-2.2 Port Spreader Tube only - Clear Anodized  : K-FS612TP:
SP-2.2 Starboard Spreader Tube only - Clear Anodized  : K-FS612TS:
SP-2.2 Port Spreader Ass'y - Painted White w/ Cast Tip : K-FS612APW:
SP-2.2 Starboard Spreader Ass'y - Painted White w/ Cast Tip : K-FS612ASW:
SP-2.2 Spreader Tip - Original Cast Aluminum : K-10262:
SP-2.2 Spreader Tip - New Style (Hard Plastic) : K-10777P:
SP-2.2 Wrap-around Spreader Bracket (for 2740 Mast, 20° aft) : K-10561:
Harpoon 6.2 Boom and Components - Kenyon 2331 Boom
Description Part #
Harpoon 6.2 Boom Assembly - Clear Anodized : K-FB612A:
Harpoon 6.2 Boom Kit - 2331 Section x 8' 9" w/ all Hardware : K-FBK612A:
Harpoon 6.2 - 2331 Boom Tube only x 8' 9" - Clear Anodized : K-FBT612A:
Gooseneck Ass'y w/ Tack Pin & SS Yoke : K-43106:
Gooseneck Replacement Casting only w/ Tack Pin : K-10448-1A:
Gooseneck Toggle, 1" Square : K-1993:
Mainsheet/Vang Bail (SS) for Boom, 1/4" (2 required) : K-10456:
Boom Bail Bolt Ass'y, 1/4" : K-10456BA:
Clam Cleat - CL203 (2 required) : K-9115X:
SS Eyestrap/Fairlead (5 required) : K-226:
Cheek Block - Original - (2 required) : K-140X:
Outhaul Casting : K-10448:

~ Back to Spars Main Page ~

~ Back to One Design Main Page ~

~ Back to Kenyon Main Page ~

~ Home ~