Common Replacement Parts are listed below.
Additional specifications and photographs of all components listed below, as well
as details of the Spar Sections and additional parts, are available on the
Spar Section, or Parts pages.
E-22 Masts built in the US use the Kenyon
3049 Mast Section.
E-22 Booms built in the US use the Kenyon 2632 Boom
Section.
E-22 Spreaders built in the US use the Kenyon
SP-2 Spreader Section. |
| E-22 Mast &
Components - Kenyon 3049 Mast
Section |
| Description |
Part # |
| E-22 Mast Assembly per Current Specifications - Clear Anodized |
: K-FM361A: |
| E-22 Mast Tube only - Clear Anodized - 38' 3" LOA |
: K-FMT361A: |
| Mast Tube is Tapered w/ welded Masthead, Jib Box, Deck Exits,
& sailgate cutout, ready to transfer hardware. No SS Hardware is included.
|
|
|
| Main Halyard Sheaves - Aluminum 2" OD |
|
| - New Style Sheave - Heavy-duty w/ integral bushing |
: K-198-8AB4:
|
| - Old Style Sheave w/ 3/8" ID (Requires Bushing) |
: K-198-8A:
|
| Main halyard sheave Bushing (Bronze) 3/8" OD x 1/4" ID |
: K-9523:
|
| Main halyard sheave Clevis Pin (1/4" dia.) |
: CP4-28K:
|
| Main halyard Lock Assembly (attaches to Mast) |
: K-1314:
|
| Main halyard Lock Entry Ramp (attaches to Mast below Lock Ass'y) |
: K-1860:
|
| Main halyard Lock Link (attaches to halyard) |
: K-1424:
|
| Jib Halyard Sheaves - Aluminum - 1 3/4" OD |
|
| - New Style Sheave w/ 1/4" ID - Heavy-duty w/ integral bushing |
: K-198-7AB4:
|
| - Old Style Sheave w/ 3/8" ID (Requires K-9523 Bushing) |
: K-198-7A:
|
| Jib halyard sheave Bushing (Bronze) 3/8" OD x 1/4" ID |
: K-9523:
|
| Jib halyard sheave Axle Pin w/ Tab (1/4" dia. x 1 3/4" OA) |
: K-1297-3: |
| Spinnaker halyard Sheave - Har 160 Plastic Ball-bearing |
: K-11598:
|
| Spinnaker halyard sheave Axle Pin w/ Tab (1/4" dia. x 2 1/2" OA) |
: K-1297-4:
|
|
| Shroud Tang w/ 5/16" Clevis Pin |
: K-1491: |
| Shroud Tang Flange Bushing - 1/2" OD x 5/16" ID |
: K-9630:
|
| Pole lift Exit Block - New style |
: Har 088:
|
| Pole lift Exit Block - SS Old style w/ plastic sheave |
: K-11110P-1: |
| Pole lift Exit Block - SS Old style w/ Alu. sheave |
: K-11110A-1: |
| See:
Spinnaker Pole Cars for 1" T-track |
|
| Gooseneck Bracket SS - Standard |
: K-10324:
|
| Gooseneck Bracket SS - Reinforced |
: K-10324R:
|
| Gooseneck Track - 7/8" SS C-track x 14" (Old style) |
: K-R511T-14R: |
| Halyard Exit Box Sheaves - Aluminum |
|
| - New Style Sheave - Heavy-duty w/ integral bushing |
: K-198-7AB4:
|
| - Old Style Sheave w/ 3/8" ID (Requires : K-9523 Bushing) |
: K-198-7A:
|
| Halyard Exit Box sheave Bushing (Bronze) 3/8" OD x 1/4" ID |
: K-9523:
|
| Halyard Exit Box sheave Axle Pin (1/4" dia.) |
: CP4-61K:
|
| Mast Step Assembly w/ SS Plate |
: K-10674A:
|
| Mast Step Casting |
: K-1286-1:
|
| Mast Step SS plate |
: K-10673:
|
| E-22
Spreaders & Components - Kenyon
SP-2 Spreader Section |
| Description |
Part # |
| Port Spreader Assembly - Black Anodized |
: K-FS361AP: |
| Starboard Spreader Assembly - Black Anodized |
: K-FS361AS: |
| Spreader Tip w/ screw & locknut |
: K-9409A:
|
| Wrap-around Spreader Bracket Ass'y, SS New style |
: K-1290-WA: |
| Port Spreader Bracket SS |
: K-1290-P:
|
| Starboard Spreader Bracket SS |
: K-1290-S:
|
| Spreader Bracket Liner (pair) |
: K-9407P:
|
|
E-22 Boom & Components -
Kenyon 2632 Boom Section |
| Description |
Part # |
| E-22 Boom Assembly per Current Specifications - Clear Anodized |
: K-FB361A: |
| E-22 Boom Tube only - Clear Anodized - 11' 8 1/2" |
: K-FBT361A: |
|
| Gooseneck Assembly w/ Toggle, Tack & Yolk |
: K-9666A: |
| Gooseneck Toggle, Tack & Yolk Ass'y |
: K-10604: |
| Gooseneck Slide for 7/8" SS C-track (Old style) |
: K-R511S:
|
| Gooseneck Casting only |
: K-9666:
|
| Mainsheet/Vang Bail (for 3/8" bolt) |
: K-2223:
|
| Mainsheet Bail - Internal |
: K-11364:
|
| Outhaul Casting only |
: K-9667C:
|
