Common Replacement Parts are listed below.
Additional specifications and photographs of all components listed below, as well as
details of the Spar Sections and additional parts, are available on the Spar Section,
or Parts pages.
Sonar Masts use the Kenyon 2740 Mast Section.
Sonar Booms use the Kenyon D-Section Boom.
Sonar Spreaders use the
Kenyon SP-2.2 Spreader Section
at 10° aft, though early models used the same Spreaders at 15° aft. |
|
Sonar Mast & Components - Kenyon 2740 Mast
Section |
| Description |
Part # |
| Sonar Mast Ass'y per Current Specifications - Clear Anodized |
: K-FM653A: |
|
| Masthead Cover Plate
2740 x 33'9" |
: K-11228:
|
| Backstay Clevis Pin - 1/4" x 7/8" grip |
: CP4-28K:
|
| Main Halyard Sheaves - Aluminum 1 3/4" OD |
|
| - New Style Sheave - Heavy-duty w/ integral bushing |
: K-198-7AB4:
|
| - Old Style Sheave w/ 3/8" ID (Requires Bushing) |
: K-198-7A:
|
| Main halyard sheave Bushing (Bronze) 3/8" OD x 1/4" ID |
: K-9523:
|
| Spinnaker Halyard/Pole lift Exit Block - New style - Harken |
: Har 088:
|
| Forestay/Shroud T-Ball Backing Plate K-D40704 |
: Gib 740-5:
|
| Forestay/Shroud T-Ball Retaining Plug - Rubber |
: Gib 742-5:
|
| Spinnaker Pole Mast Eye |
: K-10562:
|
| Gooseneck bracket SS - for 1" Toggle |
: K-10567:
|
| Gooseneck bracket SS - for 1 1/2" Toggle - Old Style |
: K-10602:
|
| Halyard Lock |
: K-232:
|
| Vang Bracket (SS) for Mast - Original |
: K-10970:
|
| Vang Bracket Base Plate |
: K-553406: |
| Vang Bracket Swivel |
: K-558123: |
| Galloway style Vang Tube Bracket |
: K-FSP653-VTB: |
| Galloway Vang Tube Swivel (SS) |
: K-FSP653-VT: |
| Spinnaker Halyard Cheek Block |
: Sch 504-11:
|
| Spinnaker Halyard Cheek Block Mounting Pad |
: Sch 55-60:
|
| Internal Doubler Kit for lower Pole lift Exit Block 13" long w/ rivets |
: K-FSP653-188: |
| Mast Step Casting |
: K-10565M:
|
|
Sonar Spreaders & Components -
Kenyon SP-2.2 Spreader
Section |
| Description |
Part # |
| Port Spreader Assembly - Clear Anodized |
: K-FS653AP: |
| Starboard Spreader Assembly - Clear Anodized |
: K-FS653AS: |
| Spreader Tube only - Port - Clear Anodized
Max 28"@10
|
: K-FST653AP: |
| Spreader Tube only - Starboard - Clear Anodized |
: K-FST653AS: |
|
| Spreader Tip - New Style (Hard Plastic) |
: K-10777P:
|
| Spreader Tip - Old Style (Urethane) - NLA Use K-10777P |
: K-10777: |
| Standard Wrap-around Spreader Base Ass'y - 10° aft |
: K-10561-3: |
|
">Retrofit
Spreader Bar & Reinforcing Plate Kit for Sonar |
: K-10561B-K10: |
|
(wrap-around style - matches existing holes) - 10° aft |
|
|
">Spreader
Bar & Reinforcing Plate Kit for Sonar - 10° aft
|
: K-11882-1K10:
|
| Aluminum Spreader Bar (10° aft) |
: K-11777-10:
|
| Sonar
Boom & Components - Kenyon D-Section
Boom |
| Description |
Part # |
| Sonar Boom Assembly - Clear Anodized - D x 10' 8 1/2" |
: K-FB653A: |
| Sonar Boom Tube only - Clear Anodized - D x 11' 4" (max. long) |
: K-FBT653A: |
|
| Gooseneck Casting Ass'y w/ Toggle |
: K-2123:
|
| Gooseneck Toggle |
: K-1993:
|
| Vang/Mainsheet Bail for 1/4" bolt |
: K-10456:
|
| Boom Bail Bolt Ass'y, 1/4" |
: K-10456BA:
|
| Vang Bracket (SS) for Boom - Original |
: K-1757:
|
| Vang/Mainsheet Bail - Internal |
: K-11364:
|
| Sonar
Spinnaker Poles & Components |
| Description |
Part # |
-- All poles are Class maximum length
- 8' 6 3/4" (2610mm), w/ a single trip line.
|
Sonar Alu. Spinnaker Pole, Ultra Ends w/
center point attachments
|
: K-FP653UA: |
| Sonar Aluminum Spinnaker Pole Replacement Tube -
2" OD x 8'2"
|
: RTA2-065-8'2: |
| Forespar Ultra Composite End w/ Trip line, projects 2
3/4" from tube
|
: EF-200-UXP:
|
|
Sonar - Other Components |
| Description |
Part # |
|
Elvstrom SS Bailer,
'New Large', as original - mounts from outside Hull |
: Elv 11-NL:
|
| Rubber Gasket only for Elvstrom 'New Large' SS Bailer |
: Elv 11-NLG:
|
