Nicro-Fico 2100 Traveller


NF 2100 Traveller Track
*NF 2100 Ball Bearing Traveller Track x 3' 11": NF 2100-4:* NF 2100 Recirculating Ball Bearing Traveller Track is a Black hardcote anodized Aluminum Track that measures 1 9/16" (40mm) across the top, 1 11/16" (43mm) across the base and is 7/8" (22mm) high. Track is drilled for 10mm (3/8") RH Screws on 3 15/16" (100mm) centers and has 5/16" stop holes on 1 7/8" (48mm) centers. NF 2100 Traveller Track is now available in 3 ft. 11" lengths only.
*NF 2100 - Car Loader for Short Car: NF 2100-CL8:* *NF 2100 - Car Loader for Medium Car: NF 2100-CL10:* *NF 2100 - Car Loader for Long Car: NF 2100-CL12:* Short pieces of NF 2100 Recirculating Ball Bearing Traveller Track are used for Traveller Car loading and transport. This item is shipped with all NF 2100 Cars, used to transfer the Traveller Car to the Traveller Track, and to load the Ball Bearings. Car loading Tracks are 8", 10", and 12" long.

NF 2100 Traveller Cars NF 2100 Traveller Cars utilize 9.5mm Torlon balls in dual recirculating races (on each side of the Car), and come in 3 lengths. NF 2100 Recirculating Ball Bearing Traveller Systems have the advantage of externally accessible bearing races that make rinsing (crucial for keeping recirculating ball systems working smoothly), and inspection easy. All NF 2100 Cars feature a stainless steel pivoting mainsheet Toggle. Short (5 7/8"), Medium-length (7 3/8"), and Long (9 3/4") Cars are available in a variety of configurations for safe working loads of up to 12,000 lbs.. NF 2100 Traveller Cars are constructed of extruded aluminum alloy with removable aluminum end caps for access to the Ball Bearings. As with all Recirculating Ball Traveller Cars, special precautions must be taken when removing them from the track. All Traveller Cars are shipped on Car Loaders, see above.
*Short Traveller Car w/ 2 Sheaves & Beckets: NF 2101:* Short Recirculating Ball Traveller Car for NF 2100 Track features 2 Control Sheaves, 2 Beckets, and a Pivoting Toggle for attachment to mainsheet block. Short Car is 5 7/8" (150mm) long with a maximum width of 3 9/16" (90mm), and has a safe working load of 5000 lbs.. Provides a 3-1 control purchase.
*Short Traveller Car w/ 4 Control Sheaves: NF 2102:* Short Recirculating Ball Traveller Car for NF 2100 Track features 4 Control Sheaves and a Pivoting Toggle for attachment to mainsheet block. Short Car is 5 7/8" (150mm) long with a maximum width of 3 9/16" (90mm), and has a safe working load of 5000 lbs.. Provides a 4-1 control purchase. **

*Medium Traveller Car w/ Clevis Beckets: NF 2103:* Medium length Recirculating Ball Traveller Car for NF 2100 Track features 2 Heavy-duty Clevis Beckets and a Pivoting Toggle for attachment to mainsheet block. Medium length Car is 7 3/8" (188mm) long with a maximum width of 3 9/16" (90mm), and has a safe working load of 8000 lbs.
*Medium Traveller Car w/ 2 Control Sheaves & Beckets: NF 2104:* Medium length Recirculating Ball Traveller Car for NF 2100 Track features 2 Control Sheaves, 2 Beckets, and a Pivoting Toggle for attachment to mainsheet block. Medium length Car is 7 3/8" (188mm) long with a maximum width of 3 9/16" (90mm), and has a safe working load of 8000 lbs.. Provides a 3-1 control purchase.
*Medium Traveller Car w/ 4 Control Sheaves & Beckets: NF 2105:* Medium length Recirculating Ball Traveller Car for NF 2100 Track features 4 Control Sheaves, 2 Beckets, 2 Cam Cleats and a Pivoting Toggle for attachment to mainsheet block. Medium length Car is 7 3/8" (188mm) long with a maximum width of 3 9/16" (90mm), and has a safe working load of 8000 lbs. Provides a 4-1 or 5-1 control purchase.
	*Medium Traveller Car w/o Attachments: NF 2104-HYS:*
	Medium length Recirculating Ball Traveller Car for NF 2100 Track is as NF 2104 and NF 2105, above, but without Control Sheaves or Toggle, Toggle attachment Pin is included. Medium length Car is 7 3/8" (188mm) long with a maximum width of 3 9/16" (90mm), and has a safe working load of 8000 lbs.. Special as used by Hood Yacht Systems for Outhaul Cars, and on various Custom projects.

*Long Traveller Car w/ Clevis Beckets: NF 2108:* Long Recirculating Ball Traveller Car for NF 2100 Track features 2 Heavy-duty Clevis Beckets and a Pivoting Toggle for attachment to mainsheet block. Long Car is 9 3/4" (248mm) long with a maximum width of 3 9/16" (90mm), and has a safe working load of 12,000 lbs..

NF 2100 Traveller Car Parts
*Ball Bearing Pack for NF 2100 Short Cars: NF 2121-BPS:* *Car Loader for NF 2100 Short Cars: NF 2100-CL8:*
Replacement ball bearing pack for NF 2100 Short (6") Cars contains fifty-six (56) 9.5 mm Torlon ball bearings. Loading and transport Track as included with all Short Traveller Cars is 8" long.
*Ball Bearing Pack for NF 2100 Medium Cars: NF 2121-BPM:* *Car Loader for NF 2100 Medium Cars: NF 2100-CL10:*
Replacement ball bearing pack for NF 2100 Medium (7 3/8") Cars contains seventy-six (76) 9.5 mm Torlon ball bearings. Loading and transport Track as included with all Medium Traveller Cars is 10" long.
*Ball Bearing Pack for NF 2100 Long Cars: NF 2121-BPL:* *Car Loader for NF 2100 Long Cars: NF 2100-CL12:*
Replacement ball bearing pack for NF 2100 Long (9 3/4") Cars contains one hundred (100) 9.5 mm Torlon ball bearings. Loading and transport Track as included with all Long Traveller Cars is 12" long.

*1 1/2" Sheave for NF 2100 Cars: RF 1431SX:* Black Delrin Ball Bearing Replacement Sheave is 1 1/2" OD x 11/16" (.680") wide x 5/16" ID. With Rope Groove for up to 3/8" line. As used on Nicro-Fico 2100 series Traveller Cars. NF 1766WX
*2" Sheave for NF 2100 Cars: RF 1431S:* Black Delrin Ball Bearing Replacement Sheave is 2" OD x 11/16" (.680") wide x 5/16" ID. With Rope Groove for up to 7/16" line. As used on older Nicro-Fico 2100 series Traveller Cars. NF 1767WX

*SS Toggle for NF 2101 Car: NF 2101T:* Y-shaped cast SS Toggle for NF 2101 Car is 11/16" (.670") wide x 2 1/2" long with 3/8" lower hole, and includes 5/16" Upper Clevis Pin.
*SS Toggle for NF 2100 Medium & Large Cars: NF 2103T:* Y-shaped cast SS Toggle for Medium and Large NF 2100 Cars is 3/4" wide x 2 1/2" long with 3/8" holes, and includes 3/8" Upper Clevis Pin.
*SS Becket for NF 2100 Cars: NF 2108B:* Cast SS Replacement Toggle for NF 2100 Cars is 3/4" wide x 2 1/2" long with 3/8" hole, and includes 5/16" Clevis Pin. Used on NF 2103, & NF 2108 Cars.
*Car End Cap for NF 2100 Cars: NF 2101EC:* Car End Cap for NF 2100 Cars. Machined Aluminum End Cap is attached with (2) special screws, available separately. As used on all NF 2100 Cars.
	*Car End Cap Screw for NF 2100 Cars: NF 2101EC-S:* Special shoulder screw used to secure the Car End Cap for NF 2100 Cars has 10-24" partial thread. As used on all NF 2100 Cars, 2 screws are required per End Cap.

NF 2100 Traveller Ends & Stops
*Aluminum Track End: NF 2119:* Cast Aluminum Track End covers track end and attaches to deck with (1) 5/16" (8mm) FH screw. Extends 2 3/8" beyond track end.
*Adjustable Track Stop: NF 2118:* Adjustable Track Stop for NF 2100 Track features SS Spring Pin and rubber bumpers to cushion car impact. Used on free-floating car systems without end controls, especially for jib and staysail boom travellers. Adjustable Track Stop is 2 1/4" (57mm) long with a maximum width of 2 1/2" (64mm).

NF 2100 Traveller Control Ends Control Ends for NF 2100 Travellers are designed to mount on the Track itself. In cockpits, it is also common to use blocks mounted on the cockpit sides for controls. Track-mount Control Ends are available in a variety of configurations with or without cam cleats for 2-1, 3-1, and 4-1 purchase systems. As the Track-mount Control Ends do not cover the end of the track, they are normally used with *NF 2119* Track Ends (above), which do. For maximum adjustment control ends should be mounted as far apart as possible.
*Single Sheave, Track-mount Control End w/ Cam Cleat & Becket - Left: NF 2109L:* *Single Sheave, Track-mount Control End w/ Cam Cleat & Becket - Right: NF 2109R:*
For 2-1 purchase systems. Extruded Aluminum Ends with rubber bumpers slide onto track and are held in place by the long outboard bolt which goes through track and deck. Control line dead-ends on Becket, goes around sheave on Car, then around Control End Sheave and through cam cleat. Unit is (maximum) 4" long x 2 1/2" wide.
*Single Sheave, Track-mount Control End w/ Becket: NF 2113:* For 2-1 purchase systems with cleats mounted separately. Extruded Aluminum Ends with rubber bumpers slide onto track and are held in place by the long outboard bolt which goes through track and deck. Control line dead-ends on Becket, goes around sheave on Car, then comes back around Control End Sheave to separate cleat. Unit is (maximum) 4" long x 2 1/2" wide.
*Double Sheave, Track-mount Control End w/ Cam Cleat & Becket - Left: NF 2111L:* *Double Sheave, Track-mount Control End w/ Cam Cleat & Becket - Right: NF 2111R:*
For 3-1 or 4-1 purchase systems. Extruded Aluminum Ends with rubber bumpers slide onto track and are held in place by the long outboard bolt which goes through track and deck. For 3-1 systems Control line dead-ends on Becket on Car, goes around upper Control End Sheave, back through the Sheave on the Car, then around lower Control End Sheave and through Cam Cleat. For 4-1 systems Control line dead-ends on Control End Becket, goes around upper Sheave on Car, back around upper Control End Sheave, back through lower Sheave on Car, then around lower Control End Sheave and through Cam Cleat. Unit is (maximum) 4" long x 2 1/2" wide.
*Double Sheave, Track-mount Control End w/ Becket: NF 2114:* For 3-1 or 4-1 purchase systems with cleats mounted separately. Extruded Aluminum Ends with rubber bumpers slide onto track and are held in place by the long outboard bolt which goes through track and deck. For 3-1 systems Control line dead-ends on Becket on Car, goes around upper Control End Sheave, back through the Sheave on the Car, then around lower Control End Sheave to separate cleat. For 4-1 systems Control line dead-ends on Control End Becket, goes around upper Sheave on Car, back around upper Control End Sheave, back through lower Sheave on Car, then around lower Control End Sheave to separate cleat. Unit is (maximum) 4" long x 2 1/2" wide.
	*2" Sheave for NF 2100 Control Ends: RF 1431S:* Black Delrin Ball Bearing Sheave is 2" OD x 11/16" (.680") wide x 5/16" ID. With Rope Groove for up to 7/16" line. As used on Nicro-Fico 2100 series Traveller Control Ends. NF 1766WX
	*Rubber Bumpers for NF 2100 Control Ends: NF 2111B-6:* Black rubber bumpers are used on NF 2100 Traveller Control Ends. Improved Bumpers are 5/8" OD for increased performance. Sold in packs of 6 pieces.

Your cart

Spars, Rigging, and Hardware for Sailboats