Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Z-SPAR Spreaders


Spreader Specifications & Components

Listed below are the most common Z-Spar Spreader Sections. Most Z-Spar Spreader Sections feature an integral "tail", so that the Spreaders (as an option) can be tapered at the outboard ends without welding.

For Replacement Spreaders and Parts, determine which Spreader you have by measuring the Spreader Section at its' largest points.
Click on individual Spreader Sections, below, to see hardware and Parts commonly used with those Sections.
See also Z-Spar Masts, and Z-Spar Booms.
 

         Z-Spar Spreader Section Max. Outside Dimensions Internal Dimensions (maximum) Wall Thickness (minimum)
Z10   44mm x 10mm
(1 3/4" x 3/8")
30mm x 4.5mm
(1 1/8" x 3/16")
1.5mm
Z60   55mm x 20mm
(2 3/16" x 13/16")
32mm x 12mm
(1 1/4" x 1/2")
1.8mm
Z65   56mm x 20.5mm
(2 3/16" x 13/16")
52mm x 17mm
(2 1/16" x 11/16")
1.8mm
Z80 57mm x 25mm
(2 1/4" x 1")
52mm x 17mm
(2 1/16" x 11/16")
2mm
Z95 80mm x 25mm
(3 1/8" x 1")
52mm x 17mm
(2 1/16" x 11/16")
2mm
Z180 93mm x 40mm
(3 5/8" x 1 9/16")
86mm x 32mm
(3 3/8" x 1 1/4")
3mm
Z240 130mm x 40mm
(5 1/8" x 1 9/16")
86mm x 32mm
(3 3/8" x 1 1/4")
3mm
Z341 155mm x 49mm
(6 1/8" x <2")
   
Z541 180mm x 60mm
(7" x 2 3/8")
   

~ Back to Z-Spar Main Page ~

~ Home ~