|
|
| Common Replacement Parts are listed below. Additional specifications and photographs of all components listed below, as well as details of the Spar Sections and additional parts, are available on the Spar Section, or Parts pages. Ensign Masts use the Rig-Rite
RR-4025 Mast Section. |
| Ensign Mast and Components - Rig-Rite RR-4025 Mast Section |
| Description | Part # | Price |
| Ensign Mast Assembly Complete | SP-CDTyWMA | $ Call |
| Ensign Mast Section only - RR-4025 Raw x 31' 8" | RR-4025Rx31'8 | $ Call |
| Ensign Mast Section milled - RR-4025 x 31' 8" | SP-CDTyWMM | $ 0.00 |
| - Clear Anodized Mast Section is milled for gate and Main Halyard Sheave. | ||
| Masthead Assembly, Fractional - Complete w/ Pins ** | RR-4025M-H5 | $ .00 |
| Masthead Clevis Pin only, 1/4" x | SP-CP4- | $ .00 |
| Main Halyard Sheave – Aluminum (new style) 3/8" ID | SP-11881 | $ .00 |
| Main halyard sheave Bushing (Bronze) 3/8" OD x 1/4" ID | SP-9523 | $ .00 |
| Spinnaker Halyard Block | SP-201 | $ .00 |
| Forestay Tang w/ Spinnaker Crane | SP-201 | $ .00 |
| Forestay/Spinnaker Tang | SP-201 | $ .00 |
| Shroud Tang for 5/16" Pin | SP-209 | $ .00 |
| Spreader Base, Cast Aluminum (w/ female socket), w/ Cotter Pin ** | RR-4025M-SB2 | $ .00 |
| Spinnaker Pole Track - 1" Aluminum T-Track x 2', Black | Mer 7001-102 | $ .00 |
| Spinnaker Pole Car - 3/4" T-Track or Flat Track | Sch 73-26X | $ .00 |
| Spinnaker Pole Car - 7/8" T-Track or Flat Track | Sch 73-27X | $ .00 |
| Spinnaker Pole Car - 1" T-Track or Flat Track | Sch 73-28X | $ .00 |
| Sail Slide Stop | SP-11000 | $ .00 |
| Spar Cleat - 4" | SP-11000 | $ .00 |
| Spar Cleat - 5" | SP-11000 | $ .00 |
| Mast Step Upper Casting - fits in Mast - Upper Part 70 ** | RR-4025M-KS | $ **.00 |
| Mast Step Base Plate w/ bolts & nuts - Attaches to Keel | RR-4025M-KSP | $ .00 |
| Ensign Spreaders & Components - Spartan SP-091 Spreader Section |
| Description | Part # | Price |
| Spreader Assembly 1 5/16" OD - Clear Anodized | SP-091A-__ | $ .00 |
| Spreader Assembly Set (2 pieces) 1 5/16" OD - Clear Anodized | SP-091A-__P | $ .00 |
| Spreader Tube only 1 5/16" OD x " - Clear Anodized 28 | SP-091TC-__ | $ .00 |
| Spreader Tip - Cast Aluminum 25,55b | SP-091T | $ .00 |
| Spreader Base, Cast Aluminum (w/ female socket), w/ Cotter Pin *** | RR-4025M-SB1C | $ .00 |
| Spreader Base Bolt, SS w/ Locknut - 1/2" x 4" | BA-1/2"Cx4"L | $ .00 |
| Ensign Boom & Components - Rig-Rite RR-4025 Boom Section |
| Description | Part # | Price |
| Ensign Boom Assembly - Standard - Clear Anodized | RR-4025PEBA | $ Call |
| Ensign Boom Tube only - Clear Anodized (RR-4025 x 11') 195 | RR-4025CAx11' | $ .00 |
| Gooseneck Ass'y - Roller Reefing w/ Toggle(PP-B4) & Slide(PP-M5A) | PP-4025-3APTS | $ .00 |
| Gooseneck Ass'y - Roller Reefing w/ 1 1/2" Toggle (PP-B4) | PP-4025-3APT | $ .00 |
| Gooseneck Assembly w/ Roller Reefing Shaft | PP-4025-3AP | $ .00 |
| Gooseneck Replacement Casting only, w/ Tack Pin | PP-4025-3A | $ .00 |
| Gooseneck Roller Reefing Shaft only | PP-B2 | $ .00 |
| Gooseneck Toggle only (1 1/2" high) | PP-B4 | $ .00 |
| Gooseneck Toggle only (7/8" high) | PP-B4X | $ .00 |
| Gooseneck Slide only (for 1 1/2" Toggle, fits 4025 Mast Section) | PP-M5A | $ .00 |
| Vang Ball Attachment Plate (flush), for use w/ Ball Wire Pennant | Sch 90-54X | $ .00 |
| Vang Wire Pennant Ass'y with swage Ball, 6" long | K-2182WP | $ .00 |
| Boom Bail for 3/8" bolt -- Not for use w/ Roller Reefing | K-2223 | $ .00 |
| Boom Bail Bolt assembly - 3/8" | K-2223BA | $ .00 |
| Outhaul Assembly w/ 2 Tangs | PP-4025-4-2 | $ .00 |
| Outhaul Casting only | PP-4025-4 | $ .00 |
| Ensign Boom & Components - Rig-Rite RR-3522 Boom Section |
||
| Description | Part # | Price |
| Rig-Rite 3522 Boom Section is no longer available. For Replacement Booms, RR-4025 Section is recommended. RR-3522 Boom Parts not listed below are identical to those listed under RR-4025 Boom, above. | ||
| Gooseneck Assembly w/ 1 1/2" Toggle (PP-B4) & Slide (PP-M5A) | PP-3522-3ATS | $ .00 |
| Gooseneck Assembly w/ 1 1/2" Toggle (PP-B4) | PP-3522-3AT | $ .00 |
| Gooseneck Assembly w/ 7/8" Toggle (PP-B4X) | PP-3522-3ATX | $ .00 |
| Gooseneck Replacement Casting only, w/ Tack Pin | PP-3522-3 | $ .00 |
| Vang Ball Attachment Plate (flush), for use w/ Ball Wire Pennant | K-2182F | $ .00 |
| Boom Bail for 1/4" bolt -- Not for use w/ Roller Reefing | K-10456 | $ .00 |
| Boom Bail for 1/4" bolt | K-10456BA | $ .00 |
| Outhaul Assembly w/ 2 Tangs | PP-3522-4-2 | $ .00 |
| Outhaul Casting only | PP-3522-4 | $ .00 |
| Ensign - Other Parts | ||
| Description | Part # | Price |
| Stemhead, Original cast Bronze, chrome plated | PP EnsignSHBZ | $ Call |
| Rubrail End Caps - Aft Corner, Original highly polished aluminum | PP EnsignRRCA | $ .00 |
~ Back to One Design Main Page ~
~ Home ~
