The newer (and more common) Typhoon Weekender models are Deck-stepped, using the
SP-661 cast Tabernacle. All Mast Assemblies and Sections listed below refer to these versions.
If you have a Typhoon Weekender that is Keel-stepped, or has a different Mast Section,
please contact us with details.
|
| Description |
Part # |
| Typhoon Weekender Standard Mast Assembly Complete. |
: SP-CDTyWMA: |
| - Clear Anodized Mast - CD-2 x 23' 9 1/2".
Ass'y includes Spreaders, and all attached hardware,
with leaders for halyards. Standard rig includes pin for SP-661 Tabernacle. |
|
| Typhoon Weekender Mast Assembly w/ Spinnaker Option. |
: SP-CDTyWMAS: |
| - Clear Anodized Mast - CD-2 x 23' 9 1/2".
Ass'y includes everything in Standard Mast Ass'y, as well as all
Mast-mounted Spinnaker hardware, including Blocks and Car. |
|
| -- Typhoon Weekender
Standard Mast Section Only - milled. |
: SP-CDTyWMM: |
| - Clear Anodized Mast Section - CD-2 x
23' 9 1/2", is milled for gate, exit blocks (2), & SP-661
Tabernacle. Upper exit block (Harken ball-bearing for Jib halyard) is included.
|
|
| Typhoon Weekender Mast Ass'y w/ Internal Spinnaker Option. |
: SP-CDTyWMASI: |
| - Clear Anodized Mast - CD-2 x 23' 9 1/2".
Includes everything in Standard Mast Ass'y w/ Spinnaker Option, but w/ provisions for Internal Spinnaker halyard. |
|
| Typhoon Weekender
Mast Section Only - for Internal Spinnaker. |
: SP-CDTyWMMS: |
| - Clear Anodized Mast Section - CD-2 x
23' 9 1/2", is milled for gate, exit blocks (3), exit plate (port side) and SP-661
Tabernacle. Upper exit blocks (Harken ball-bearing for Jib & Spinnaker
halyard), and exit plate are included. |
|
| Typhoon Weekender Mast Section, tube only - CD-2 x 23' 9 1/2" |
: SP-CDTyWMT: |
|
| Masthead Ass'y, Cast Anodized Alu. - Complete, w/ Delrin Sheave |
: SP-040P: |
| Masthead Clevis Pin only, 1/4" 9803 |
: CP4-34:
|
| Main Halyard Sheave - Plastic, 3/8" ID And |
: PP S5.3D8-6:
|
| Main halyard sheave Bushing (Bronze) 3/8" OD x 1/4" ID |
: K-9523:
|
| OR |
|
| Main Halyard Sheave - Aluminum w/ integral bushing, 3/8" ID And |
: PP S5.3A8-B6:
|
| Main halyard sheave Bushing (Bronze) 3/8" OD x 1/4" ID |
: K-9523:
|
|
| Eyestrap for Spinnaker Halyard Block, 4-hole |
: K-226-4:
|
| Spinnaker Halyard Swivel Block, SS |
: SP-019BL: |
| Forestay Tang |
: SP-201:
|
| Jib halyard Exit Block - Old style |
: SP-225: |
| Jib halyard Exit Block - New style |
: Har 088:
|
| Shroud Tang for 1/4" Pin (Uppers & Lowers) |
: SP-209:
|
| Sail Slide Stop |
: K-11198:
|
| Spar Cleat - 4" |
: D-10324:
|
| Downhaul Cleat - 3" (slides in track) SP-023 |
: K-1108:
|
| Halyard Exit Block - Double sheave, at mast base |
: SP-911: |
| Tabernacle Mast Step Casting |
: SP-661: |
| Tabernacle Pin Assembly |
: SP-662:
|
| - Optional Spinnaker Parts |
Part # |
| Eyestrap for Spinnaker Halyard Block, 4-hole K-226-4 |
: K-226-4:
|
| Spinnaker Halyard Swivel Block, SS |
: SP-019BL: |
| Eyestrap for Pole Lift Block, 2-hole |
: K-226:
|
| Spinnaker Pole Lift Swivel Block, SS |
: SP-019BL: |
| Spinnaker Pole Track - 3/4" Aluminum T-Track x 2' @6'6" |
: Mer 7000B-2:
|
| End Stop for 3/4" T-Track, Black (2 required) |
: Mer 7000B-ES:
|
| Spinnaker Pole Car* - 3/4" T-Track or Flat Track |
: Sch 73-26X:
|
| - Complete Kit includes all parts listed above and
includes all fasteners. |
: SP-CDTyWSHK: |
| Spinnaker Pole - 1 1/4" OD x 6' 2 1/2" w/ SS Piston Ends. |
: SP-CDTyWSP: |
|
| *Other sizes of Spinnaker Track have also been used, Cars for them are listed below.
|
| Spinnaker Pole Car - 7/8" T-Track or Flat Track |
: Sch 73-27X:
|
| Spinnaker Pole Car - 1" T-Track or Flat Track |
: Sch 73-28X:
|
