Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions
J/24 Standard Spars & Common Parts
Common Replacement Parts are listed below, but older spars may have different ones, especially smaller parts like Blocks and Pins. Verify measurements before ordering!

Additional specifications and photographs of all components listed below, as well as details of the Spar Sections and additional parts, are available on the Spar Section, or Parts pages.

J/24 Masts built in the US use the Kenyon 3049 Mast Section.
J/24 Booms built in the US use the Kenyon D-Section Boom.
J/24 Spreaders built in the US use the Kenyon SP-2.2 Spreader Section,
        though early models used the Kenyon SP-2 Spreader Section.
Older model Booms used different (non-internal) boom end fittings not listed below, see Kenyon D-Section Boom page for details on those parts.
J/24 Mast & Components - Kenyon 3049 Mast Section
Description Part # Price
J/24 Mast Assembly per Current Specifications - Complete * K-FM531A $ Call
    - Clear Anodized - 34' 6 1/2" LOA
J/24 Mast Tube only - Clear Anodized - 34' 6 1/2" LOA K-FMT531AM $ Call
Mast Tube is Tapered with welded Masthead, Jib Box, & Gooseneck Bracket. Slots for T-Ball backing Plates, Pole lift, Spreader Bar, Exits and sailgate cutout are all milled, Holes for all Pins are drilled, ready to transfer hardware. Can be used with original SS Spreader Brackets, or new-style Spreader Bar. No SS Hardware is included.
Mast Head Cap : K-10322:
Backstay Clevis Pin - 1/4" x 7/8" grip : CP4-28K:
Main Halyard Sheave, Alu. w/ Bushing, 1/4" ID : K-198-7AB4:
Main Halyard Sheave, Alu. 3/8" ID : K-198-7A:
Main Halyard Sheave, Delrin 3/8" ID : K-11881:
Main halyard sheave Bushing 3/8" OD x 1/4" ID : K-9523:
Main halyard sheave Axle Pin w/ Tab - 1 3/4" OA : K-1297-3:
Main halyard sheave Clevis Pin - 1/4" x 1 7/8" grip : CP4-61K:
T-Ball Backing Plate Tang K-11654, 2 Rivet type : Gib 740-6:
T-Ball Retaining Plug, Rubber for 2 Rivet type : Gib 742-6:
T-Ball Backing Plate Tang - Old-style, 4 Rivet type : Gib 740-5:
T-Ball Retaining Plug, Rubber - Old-style, 4 Rivet type : Gib 742-5:
Forestay Clevis Pin - 5/16" x 7/8" grip : CP5-28K:
Jib halyard Sheave - Alu. 1 1/2" OD : K-10545:
Jib halyard sheave Axle Pin w/ Tab - 1 3/4" OA : K-1297-3:
Jib halyard sheave Axle Pin w/ Tab - 2" OA ** : K-1297-5:
Jib halyard sheave Axle Pin w/ Tab - 2 1/4" OA ** : K-1297-7X:
Jib Box Spacer, Alu. 1/2" OD x 3/16" ID : K-10588:
Spinnaker halyard Sheave - Alu. 1" OD : K-10587:
Spinnaker halyard sheave Clevis Pin - 1/4" x 7/8" grip : CP4-28K:
Spinnaker halyard sheave Axle Pin w/ Tab - 2 1/2" OA : K-1297-4:
Spinnaker halyard sheave Axle Pin w/ Tab - 2 7/8" OA ** : K-1297-6X:
Pole lift Exit Block - New style - Harken : Har 088:
Pole lift Exit Block - SS w/ 1 1/2" OD plastic sheave : K-11110P-1:
Pole lift Exit Block - SS w/ 1 1/2" OD Removable Alu. sheave : K-11110A-1:
Cam Cleat - RF 5010 C-Cleat : RF 5010:
Cam Cleat Base Pad - molded, fits RF 5010, & Har 150 : K-11713:
Spinnaker Pole Mast Eye : K-85783:
Spinnaker Pole Mast Eye - Heavy-duty Reinforced : K-85783R:
Gooseneck Bracket SS - for 1 1/2" Toggle : K-43024:
Vertical Clevis Pin for 1 1/2" SS GN Bracket, 1 7/8" grip : CP4-61K:
Gooseneck Bracket SS - Old style - for 1" Toggle : K-10324:
Gooseneck Bracket Set - New-style Alu. Weld-on : K-43024AP:
Gooseneck Bushing for New-style Alu. welded GN Bracket : K-9312:
Vertical Clevis Pin for New-style Alu. welded GN Bracket : CP4-76K:
Vang Bracket (SS) for Mast : K-90228:
Mast Boot, Short (10" long) for Rectangular Deck Collar : K-10674-MBS:
Mast Boot, Long (11 1/2" long) for Rectangular Deck Collar : K-10674-MBL:
Mast Step Ass'y w/ SS Plate : K-10674A:
Mast Step Ass'y w/ RF Adjuster : K-10674A-Adj:
Mast Step SS plate w/ RF Adjuster : K-10673-Adj:
Mast Step SS plate : K-10673:
Mast Step Casting - Special - J/24 : K-1286-1:
J/24 Spreaders & Components - Kenyon SP-2.2 Spreader Section
Description Part # Price
Port Spreader Assembly - Clear Anodized : K-FS531AP:
Port Spreader Assembly - Painted White : K-FS531WP:
Starboard Spreader Assembly - Clear Anodized : K-FS531AS:
Starboard Spreader Assembly - Painted White : K-FS531WS:
Spreader Tube only - Clear Anodized Port : K-FST531AP:
Spreader Tube only - Clear Anodized Starboard : K-FST531AS:
Spreader Tube only - Painted White Port Max 30.75"@17.5 : K-FST531WP:
Spreader Tube only - Painted White Starboard : K-FST531WS:
Spreader Tip - New Style (Hard Plastic) : K-10777P:
Spreader Tip - Old Style (Urethane) NLA Use K-10777P : K-10777X:
Spreader Tip - Original Cast Aluminum : K-10262:
Port Spreader Bracket SS (w/ male stud) : K-10418-9P:
Starboard Spreader Bracket SS (w/ male stud) : K-10418-9S:
Port Spreader Bracket - older SS Socket-type : K-1290-17P:
Starboard Spreader Bracket - older SS Socket-type : K-1290-17S:
Spreader Bracket Liners for socket-type Brackets (pair) : K-9407P:
J/24 Retrofit Spreader Bar Kit : K-11867K:
Aluminum Spreader Bar for J/24 : K-11777-17:
J/24 Boom & Components - Kenyon D-Section Boom
Description Part # Price
J/24 Racing Boom Ass'y - New-style w/ 1 1/2" Toggle : K-FB531RA: $ Call
   - Class Minimum Tip Weight, w/ No Tack or Reefing
    Provisions, Clear Anodized 		   
J/24 Standard Boom Ass'y per Current Specifications - Anodized : K-FB531A: $ Call
J/24 Standard Boom Assembly - Painted White : K-FB531PW: $ Call
J/24 Standard Boom Tube only - Clear Anodized : K-FBT531A: $ Call
J/24 Standard Boom Tube only - Painted White (D x 9' 5 1/2") : K-FBT531PW: $ Call
Gooseneck Assembly (Standard internal) : K-43022S:
Gooseneck Replacement Casting only (Standard internal) : K-10463:
Gooseneck Toggle SS w/ Tack Pin & Reef Hooks : K-10518A:
Gooseneck Toggle SS w/o Reef Hooks or Tack : K-10518C:
Gooseneck Reef Cam Lever - Port (w/ washers) : K-11246P:
Gooseneck Reef Cam Lever - Starboard (w/ washers) : K-11246S:
Vang Bracket (SS) for Boom : K-1757:
Mainsheet Bail for 1/4" bolt : K-10456:
Boom Bail Bolt Ass'y : K-10456BA:
Outhaul Assembly (internal) : K-43023:
Outhaul Sheave (center sheave) : K-10483:
Reef Line Sheave (for outhaul end) : K-199-4B:
J/24 Spinnaker Poles & Components
Description Part # Notes
Poles are Class Legal, 9'6" long with a single trip line. Carbon Poles are Class minimum weight.

Aluminum Spinnaker Pole, Ultra Ends w/ center point attachment : K-FP531E:
Aluminum Spinnaker Pole Replacement Tube - 2" OD x 9'1" : RTA2-065-9'1:
Aluminum Spinnaker Pole Replacement Tube - 2" OD x 9'4" : RTA2-065-9'4:
Forespar Ultra Composite End w/ Trip line, projects 2 3/4" from tube : EF-200-UXP:
Carbon Spinnaker Pole, Forespar Black w/ center point attachment : For FPC531E:
J/24 Carbon Spinnaker Pole, Forespar Black w/ double bridles : For FPC531B2:
J/24 - Other Parts
Description Part # Price
J/24 Stemhead, Original, 3/8" Pin : RR 79-J24:
Chainplate, Double for 5/16" Pins (2 required) : CP 84-77DJ:
Chainplate, Backstay Angled for 3/8" Pin (2 required) : CP 84-78-JB:
J/24 Tiller - original (varnished) : Tiller-J24:
J/24 Tiller Strap, pair : Sch 85-44P:
SS Transom Gudgeon (4 required) : Sch 81-46:
SS Transom Gudgeon Pin (2 required) : Sch 81-49P:
SS Transom Gudgeon Set (2 req'd) w/ (2) 81-46, (1) 81-49P : Sch 81-50:
SS Rudder Gudgeon - Short Upper (1 required) : Sch 81-47S:
SS Rudder Gudgeon - Long Lower (1 required) : Sch 81-48L:
Bow Pulpit - w/ 3" 3-hole Bases, Upper LL Eyes, No Lighting : PP BR-J/24:
$ 695.
Stern Pulpit - w/ 3" 3-hole Bases, Upper LL Eyes, No Lighting : PP SR-J/24: $ 595.
Stanchion Bases - Original "H" Base, Forward 10° : SB 36-H1-10: $ 109.
Stanchion Base - Original "H" Base, Aft 14° : SB 36-H1-14: $ 109.
Stanchion Base - Newer Trapezoidal, Forward 10° : SB 36-LT1-10:
Stanchion Base - Newer Trapezoidal, Aft 14° : SB 36-LT1-14:
Traveller Support Bar - Hall Spars, Black w/ Double Foot Rests : HS J/24TB-3: $ 329.
Motor Mount - Hall Spars Original, Black w/ Delrin Pad : SP 99-J24MM: $ 299.

~ Back to Kenyon Main Page ~

~ Back to One Design Main Page ~

~ Back to Spars Main Page ~

~ Home ~