 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Z-SPAR Masthead Rig Mastheads |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Z-SPAR Masthead Rig Mastheads |
|
|
|
|
|
Z-Spar uses cast aluminum mastheads with virtually all of their Mast Sections. Masthead rigged Masts, both tapered and untapered, utilize drop-in style mastheads that fit into a slot cut in the fore and aft sides of the Mast tube. Most Mastheads for Masthead Rigs are listed below. To inquire about a Masthead not listed below, please specify the Mast Section, and whether or not the Mast is tapered. See also, Masthead Spinnaker Bails, Masthead Stemball / Eye Adapters, Z-SPAR Replacement Sheaves, and Mastheads for Fractional Rigs. |
|
|
||
|
Masthead for Z170, Z190, & Z230 Masts: Z-1001XA: Cast aluminum Inset Masthead for Z170, Z190, & Z230 sections features sockets for Headstay and Backstay Stemballs. Masthead includes (2) 35mm halyard sheaves (Z-1617) on 8mm knurled axle Pins (Z-1273). Unit is 9 1/4" (235mm) long x (maximum) 3 1/2" (88mm) wide, and fits in Mast cut-out 28mm wide x 66mm deep. Fastens to mast section with (2) 8mm L-bolts: Z-MHL-8A: order separately. Replacement Sheaves are: Z-1617: Replacement knurled Axle Pins are: Z-1273:
|
|
|
|
Masthead for Z Mast Sections: Z-1003A: Cast aluminum Masthead for Z sections features sockets for Headstay and Backstay Stemballs. Unit is 11 3/4" long (without Spinnaker Bail), and fastens to mast section with (2) 8mm L-bolts: Z-MHL-8A: Masthead uses (4) 45mm halyard Sheaves: Z-1616: on 8mm knurled Axles: Z-1272X:
|
### | |
|
|
||
|
Masthead Ass'y for Z265, Z301 & Z351 Masts: Z-1007MA:
Cast aluminum Masthead for Z265, Z301, & Z351 sections features sockets for Headstay and Backstay Stemballs, and allows for attachment of both Upper shrouds Eyes with a single Pin (8 or 10mm) which seats in the casting (fore & aft). Masthead Assembly includes (4) 45mm halyard sheaves (Z-1616) and (3) 8mm Drop-in axles (Z-1329) for Sheaves and Shrouds. Options include a top Cover Plate, Z-1147 to cover halyards and sheaves, and 8mm Spinnaker Bail, Z-MHB-8A, order separately. If 10mm Shroud Pin is required order Z-1330-10 separately. Unit is 11 1/2" long (without Spinnaker Bail) x (maximum) 4 1/8" wide, includes holes for 8mm Spinnaker Bail, and fastens to mast section with (2) 8mm L-bolts Z-MHL-8A, (order separately). Replacement Sheaves are : Z-1616:
|
|
|
|
|
Cover Plate for Z265 - Z351 Mastheads: Z-1147:
Cast aluminum Masthead Cover Plate covers and protects sheaves, halyards and Upper shroud connections. Casting is 7 7/8" long x 4 3/16" wide and fastens to top of Masthead using the Masthead attachment L-bolts on 2 7/8" centers. Used on a variety of Mastheads for Z265, Z301, & Z351 Mast Sections.
|
|
|
Masthead Sheave: Z-1616:
Sheave used in Z-1007A Masthead is 45mm (1 3/4") x 13mm wide x 8mm ID.
|
||
|
Sheave Axle for Masthead: Z-1329:
SS Sheave Axle Pin is 8mm x 39mm long and is used in a variety of Mastheads for Z265 - Z351 Standard and Furling Mast Sections.
|
||
|
Shroud Pin for Masthead - 8mm: Z-1329:
Shroud Pin for Masthead - 10mm: Z-1330-10: SS Pin is used to seat Eyes for Upper Shrouds in a variety of Mastheads for Z400 - Z601 Standard and Furling Mast Sections. Upper Shroud Pin (1 required) is 8 or 10mm x 39mm long.
|
||
|
|
L-Bolt Assembly - 8mm: Z-MHL-8A:
SS L-Bolts used to attach the Masthead to the Mast on a variety of Mastheads for Z170, Z230, Z260, Z265, Z300E, Z301, Z351 and other Mast Sections. SS L-Bolt (2 required) is 8mm diameter and includes SS Locknut and washer.
|
|
|
|
8mm Integral Masthead Spinnaker Bail: Z-MHB-8A:
Angled (port or starboard) SS Masthead Spinnaker Bail for Z-Spar Cast aluminum Mastheads. Angled SS 8mm (5/16") diameter Bail is 108mm (4 1/4") long, and has milled recesses for attachment with two (2) pins or rivets. Suitable only for use with Z-Spar Cast Mastheads with holes for an 8mm Spinnaker Bail on 48mm centers.
|
|
|
|
||
|
Masthead for Z400 - Z601 Mast Sections: Z-1005A: Cast aluminum Masthead for mid-range (Z400 - Z601) Standard Mast Sections, features sockets for Headstay and Backstay Stemballs, and allows for attachment of both Upper shroud Eyes with a single Pin (10, 12, or 14mm, please specify) which seats in the casting (fore & aft). Masthead uses (4) 60mm halyard sheaves (Z-1618) on 8mm Drop-in axles (Z-1277), and a top Cover Plate, Z-1148, to cover halyards and sheaves. Casting is 15 3/8" long (14 3/8" on top) x (maximum) 5 1/2" wide, includes holes for 10mm Spinnaker Bail, Z-MHB-10, and fastens to mast section with (2) 10mm L-bolts. Cast aluminum Masthead is commonly used on Z400, Z401, Z500, Z501, Z531, Z600, & Z601 Standard Mast Sections. Replacement 60mm Sheaves are : Z-1618:
|
|
|
|
|
Cover Plate for Standard Masthead: Z-1148:
Cast aluminum Masthead Cover Plate covers and protects sheaves, halyards and Upper shroud connections. Casting is 10 3/16" long x 5" wide and fastens to top of Masthead using the Masthead attachment L-bolts. Used on a variety of Mastheads for Z400 - Z900 Standard Mast Sections.
|
|
|
Masthead Sheave: Z-1618:
Sheave used in Z-1005A Masthead is 60mm (2 3/8") x 16mm wide x 8mm ID.
|
||
|
Sheave Axle for Masthead: Z-1277-8:
SS Sheave Axle Pin is 8mm x 48mm long and is used in a variety of Mastheads for Z400 - Z601 Standard and Furling Mast Sections.
|
||
|
Shroud Pin for Masthead - 10mm: Z-1321-10:
Shroud Pin for Masthead - 12mm: Z-1322-12: Shroud Pin for Masthead - 14mm: Z-1323-14: SS Pin is used to seat Eyes for Upper Shrouds in a variety of Mastheads for Z400 - Z601 Standard and Furling Mast Sections. Drop-in Upper Shroud Pin (1 required) is 10, 12 or 14mm x 57mm long.
|
||
|
L-Bolt Assembly - 10mm: Z-MHL-10A:
SS L-Bolts used to attach the Masthead to the Mast on a variety of Mastheads for Z400 - Z1100 and other Mast Sections. SS L-Bolt (2 required) is 10mm diameter and includes SS Locknut and washer.
|
|
|
|
|
10mm Integral Masthead Spinnaker Bail: Z-MHB-10:
Flat U-shaped SS Masthead Spinnaker Bail for Z-Spar Cast aluminum Mastheads. SS 10mm (3/8") diameter U-shaped Bail is 102mm (4") long, and has drilled holes for attachment with two (2) 5mm pins or rivets. Suitable only for use with Z-Spar Cast Mastheads with holes for a 10mm Spinnaker Bail on 50mm centers.
|
|
|
|
||
| Masthead for Z400E - Z600E Furling Mast Sections: Z-1005AE: | ||
|
Cast aluminum Masthead for mid-range (Z400E, Z500E & Z600E) Furling Mast Sections,
features sockets for Headstay and Backstay Stemballs, and allows for attachment of both Upper shroud
Eyes with a single Pin (10, 12, or 14mm) which seats in the casting (fore & aft).
Masthead uses (4) 60mm halyard sheaves (Z-1618) on 8mm Drop-in axles
(Z-1277-8), and a top Furling Mast Cover Plate, Z-1149, which
incorporates sheaves and axles required for Furling Masts. Casting is 15 3/8" long
(14 3/8" on top), includes holes for 10mm Spinnaker Bail, Z-MHB-10, and fastens to
mast section with (2) 10mm L-bolts. Cast aluminum Masthead is commonly used on Z400E, Z500E &
Z600E Furling Mast Sections.
Replacement 60mm Sheaves are : Z-1618:
|
||
|
|
Cover Plate for Furling Masthead: Z-1149:
Cast aluminum Masthead Cover Plate covers and protects sheaves, halyards and Upper shroud connections, and incorporates provisions for (4) extra sheaves required on Furling Masts. Casting is 10 3/16" long x 5" wide and fastens to top of Masthead using the Masthead attachment L-bolts. Sheaves, axles, and L-bolts are available separately, below. Used on Z400E, Z500E & Z600E Furling Mast Sections.
|
|
|
Sheave for Furling Masthead Cover Plate: Z-1617:
Sheave used in Furling Masthead Cover Plate is 35mm (1 3/8") x 15mm wide x 8mm ID.
|
||
|
Sheave Axle for Masthead: Z-1277-8:
SS Sheave Axle Pin is 8mm x 48mm long and is used in both the Masthead and the Furling Cover Plate on Z400E, Z500E & Z600E Furling Mast Sections.
|
||
|
L-Bolt Ass'y - 10mm: Z-MHL-10A:
SS L-Bolts used to attach the Masthead to the Mast on a variety of Mastheads for Z400 - Z1100 and other Mast Sections. SS L-Bolt (2 required) is 10mm diameter and includes SS Locknut.
|
|
|
~ Home ~