Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questionsp

Metric SS Stanchion Bases


25mm Metric Stanchion Bases - Stainless Steel
These Metric Stainless Steel Stanchion Bases are commonly found on a variety of European and US-built Yachts. Metric SS Stanchion Bases listed here are for use with 25mm (<1") Metric Stanchions only. While 25mm Metric Stanchions can be used with 1" Stanchion Bases, 1" Stanchions (25.4mm) will not fit the 25mm Stanchion Bases listed here.

For Backing Plates, See: Stanchion Base Backing Plates.
See also: Metric Aluminum Stanchion Bases, other Stanchion Bases, and Stanchions.
 

 
Triangular 25mm Stanchion Base - 0°: SB 36-M25T-0:

Triangular 25mm Stanchion Base - 5°: SB 36-M25T-5:

Triangular Stanchion Base for 25mm Metric Stanchions. Formed and welded SS Base is 2 7/8" (73mm) long (fore and aft) x 3 1/2" (88mm) wide. Base attaches to Deck with (2) 8mm screws on 48mm (2 7/8") (fore and aft) hole centers, with a third 8mm screw 2 9/16" (65mm) inboard of the others. Unit has (1) 5mm screw to secure Stanchion, a clearance hole is normally drilled in Stanchion so screw passes through Stanchion wall and bears against its other side. Goi 97442/97440

 

Rectangular 25mm Stanchion Base - 0°: SB 36-M25R-0:

Rectangular 25mm Stanchion Base - 5°: SB 36-M25R-5:

Rectangular Stanchion Base for 25mm Metric Stanchions. Formed and welded SS Base is 3 9/16" (90mm) long x (maximum) 2 9/16" (65mm) wide. Base attaches to Deck with (4) 6mm screws on 60mm (2 3/8") (fore and aft) x 35mm (1 3/8") (athwartships) hole centers. Unit has (1) 5mm screw to secure Stanchion, a clearance hole is normally drilled in Stanchion so screw passes through Stanchion wall and bears against its other side. Goi 97439/97441

 

Rectangular 25mm Stanchion Base w/ Double Bail - 0°: SB 36-M25DB-0:

Rectangular 25mm Stanchion Base w/ Double Bail - 5°: SB 36-M25DB-5:
Rectangular Stanchion Base for 25mm Metric Stanchions has Double Bails. Welded SS Base is 3 3/4" (95mm) long x (maximum) 2 7/8" (73mm) wide. Base attaches to Deck with (4) 6mm screws on 65mm (2 9/16") (fore and aft) x 41mm (1 5/8") (athwartships) hole centers. Unit has (1) 5mm screw to secure Stanchion, a clearance hole is normally drilled in Stanchion so screw passes through Stanchion wall and bears against its other side.

 

  SBFP-H

Conical SS Stanchion Base: SB 36-M25CB:
Conical SS Stanchion Base for 25mm Metric Stanchions. Base has 10mm threaded hole for attachment to Deck with a single bolt and (2) 5mm set screws to secure Stanchion. Cast SS Stanchion Base has 45mm (1 3/4") round base and is 70mm (2 3/4") high.

 


Internal Base, 22mm OD, 16mm Threaded Post: SB 36-M25IS-16:
SS Stanchion Base has 21.9mm Stud to fit inside Special 25mm Metric SS Stanchions. Cast SS Base is 2 3/8" (60mm) long x (maximum) 1 3/4" (45mm) wide. Base attaches to Deck with integral 16mm x 50mm (2") threaded Post, Stanchion Stud is 22mm OD, and has milled flats (fore & aft) to allow for attachment of Stanchion threaded for screws. Recess at 45mm from bottom allows for semi-permanent attachment of Stanchion with rivet.

 

Internal Base, 19.5mm OD, 16mm Threaded Post: SB 36-M25IS-16A:
SS Stanchion Base has 19.5mm Stud to fit inside Special 25mm OD Aluminum Metric Stanchions. Cast SS Base is 2 3/8" (60mm) long x (maximum) 1 3/4" (45mm) wide. Base attaches to Deck with integral 16mm x 50mm (2") threaded Post, Stanchion Stud is 19.5mm OD, and has milled flats (fore & aft) to allow for attachment of Stanchion threaded for screws. Recess at 45mm from bottom allows for semi-permanent attachment of Stanchion with rivet. As SB 36-M25IS-16, above, but with 19.5mm Stud. Goi 106654X

 

 
Internal Base w/ Toerail Lip, 22mm OD, 14mm Threaded Post: SB 36-M25IS-14L:
SS Stanchion Base has 21.9mm Stud to fit inside Special 25mm Metric SS Stanchions. Cast SS Base has Lip to touch Deck beyond Toerail, Base is 2 7/8" (75mm) long x (maximum) 2 1/4" (56mm) wide and attaches to Deck with integral 14mm x 50mm (2") threaded Post, Stanchion Stud is 22mm OD, and has 6mm threaded hole (fore & aft) at 15mm from bottom for Stanchion attachment.  

~ Back to Stanchion Bases Main Page ~

~ Back to Hardware Main Page ~

~ Home ~