Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Metric Aluminum Stanchion Bases


25mm Metric Stanchion Bases - Aluminum
Cast Aluminum Stanchion Bases have been produced in a variety of configurations, by many different Boat Builders and Hardware manufacturers. If a Stanchion Base you require is not listed here, please contact us with a sketch and complete dimensions, including base footprint and hole spacing.

Stanchion Bases listed here are for use with 25mm Metric Stanchions, unless otherwise noted.

For Backing Plates, See: Stanchion Base Backing Plates.
See also: Metric SS Stanchion Bases, Aluminum Stanchion Bases, other Stanchion Bases, and Stanchions.


Goiot Aluminum Stanchion Bases
Other Aluminum Stanchion Bases
 


Goiot Stanchion Bases
Goiot Toerail Mounted Stanchion Base: Goi 808-8:

Toerail-mounted Stanchion Base adds additional support to Stanchion. Clear anodized, extruded aluminum Stanchion Base has lug that locks into Toerail lip and attaches to deck with (2) 6mm (1/4") FH screws. Base has 6mm Clevis Pin (included) to secure stanchion, and 25mm hole for Stanchion. For use with 25mm stanchions and Goiot 808 Toerail. As used on Gibsea 33, and others.

 

Goiot Deck Mounted Stanchion Base: Goi 800-8:

Triangular-shaped Stanchion Base attaches to Deck with (3) 6mm (1/4") FH screws on 65mm (2 9/16") (fore and aft) x 68mm (2 11/16") (athwartships) hole centers. Clear anodized, cast aluminum Base has 6mm tapped hole for screw to secure stanchion, and 27mm hole for Stanchion. Includes plastic stanchion sleeve, making it suitable for use with 25mm and 1" stanchions. Base has 6mm hole for attachment of furling blocks and sits 4mm off of deck, to improve drainage. ###

 

Goi 800-8
Goiot Toerail Mounted Stanchion Base: Goi 810-8:

Toerail-mounted Stanchion Base adds additional support to Stanchion. Triangular-shaped Stanchion Base has lug that locks into Toerail slot and attaches to deck with (2) 6mm (1/4") FH screws on 57mm (2 1/4") centers. Clear anodized, cast aluminum Base has 6mm tapped hole for screw to secure stanchion, and 27mm hole for Stanchion. Includes plastic stanchion sleeve, making it suitable for use with 25mm and 1" stanchions. Unit is (maximum) 3" (77mm) high x 3 3/16" (80mm) wide. For use with Goiot 811 Toerail. 811-27

 

Goiot Toerail Mounted Stanchion Base: Goi 820-8:

Toerail-mounted Stanchion Base adds additional support to Stanchion. Rectangular Stanchion Base has threaded holes for attachment to Toerail side with (2) 6mm screws on 60mm (2 5/16") centers, and through Toerail with (1) 6mm (1/4") screw (under Stanchion). Clear anodized, cast aluminum Base has 6mm tapped hole for screw to secure stanchion, and 27mm hole for Stanchion. Includes plastic stanchion sleeve, making it suitable for use with 25mm and 1" stanchions. Unit is (maximum) 2 7/8" (73mm) high x 3" (77mm) wide. For use with Goiot 822 and 823 Toerail. 822-27

 

Goi 820-8
  Goiot Plastic Stanchion Sleeve: Goi 810-PS27:

'Heat-Shrink' stanchion sleeve insulates Aluminum Stanchion Base from Stainless Steel Stanchion. Clear plastic sleeve is 85mm (3 3/8") long and adds 2mm to Stanchion diameter when applied. Included with all Goiot Stanchion Bases, Sleeves are also available separately.

 

 

Miscellaneous Aluminum Stanchion Bases
Toerail Mounted Stanchion Base: SB 36-GS1:

Toerail-mounted Stanchion Base adds additional support to Stanchion. Rectangular Stanchion Base has lug that locks into Toerail slot and attaches to deck with (2) 6mm (1/4") FH screws on 55mm (2 3/16") centers. Clear anodized Cast aluminum Base is 3 1/4" long x 2 1/2" wide (excluding lug) x 2 1/2" high (at Toerail), and has 6mm tapped hole (on fore or aft side) for screw to secure stanchion. Note: This item was originally produced with a Black anodized finish (no longer available). As used with Sparcraft Toerail on Gibsea, Kirie Elite, Feeling, and others.  GS-1TC

 


Toerail Mount Stanchion Base w/ Deck Lip: SB 36-AB600B:
Toerail-mounted Stanchion Base attaches to deck with (2) 6mm (1/4") FH screws on 1 15/16" (50mm) centers and has 5mm threaded hole for screw which attaches it to Toerail. Base has separate 8mm threaded hole for screw to secure Stanchion. Cast aluminum Base is 2 3/4" (70mm) long (inboard) x 2" long (at Toerail) x 2 3/4" (70mm) wide with Black anodized finish. As used on Beneteau First 26, First 29, and others.



 

Toerail Mount Stanchion Base w/ Deck Lip: SB 36-AB314:

Toerail-mounted Rectangular Stanchion Base attaches to deck with (2) 6mm (1/4") FH screws on 2 3/16" (55mm) centers, and has 8mm threaded hole for screw which attaches it to Toerail and secures Stanchion. Cast aluminum Base is 3 3/8" (85mm) long x 2 1/4" (57mm) wide with natural anodized finish. As used on Beneteau First 285, some 32s5, some 35s5, and others. 

 

Toerail Mounted Stanchion Base: SB 36-AB560:

Toerail-mounted Rectangular Stanchion Base bolts through Toerail and Deck with (2) 6mm (1/4") FH screws on 2 3/4" (70mm) centers, and has 8mm threaded hole for screw which attaches it to Toerail and secures Stanchion. Cast aluminum Base is 3 1/2" (90mm) long x 1 7/8" (47mm) wide x 2 3/4" (70mm) high with natural anodized finish. As used on some Beneteau First 30E, 305, 32, 345, 35, 375, 405, 42, 435E, Idylle 10.50, and others. 

 

Toerail Mount Stanchion Base w/ Tapered Socket: SB 36-AB560-T:
Toerail-mounted Stanchion Base as SB 36-AB560, above, but with Tapered Socket for special Stanchion with Tapered bottom. Commonly used with Stanchion Gate Brace assemblies. As used on Beneteau 390, and others.  650

 

 
Mini Toerail Mount Stanchion Base: SB 36-AB877:

'Mini' Toerail-mounted Triangular Stanchion Base bolts through Toerail and Deck with (1) 8mm (5/16") screw (under Stanchion), and has 8mm threaded hole for screw which attaches it to Toerail and secures Stanchion. "Mini" Cast aluminum Base is (maximum) 2 1/8" (54mm) long (fore & aft) x 1 7/8" (48mm) wide x 2 3/4" high with clear anodized finish. As used on Beneteau First 235, 285, 310, some 32s5, some 35s5, some 375, 38s5, some 405, 41s5, and others.

 

Mini Toerail Mount Stanchion Base w/ Tapered Socket: SB 36-AB877-T:
Toerail-mounted Stanchion Base as SB 36-AB877, above, but with Tapered Socket for special Stanchion with Tapered bottom. Commonly used with Stanchion Gate Brace assemblies. 878

 

 
Triangular Stanchion / Pedestal Base: SB 36-AB490:

Triangular Stanchion Base bolts through Deck with (3) 6mm (1/4") FH screws on 1 3/4" (44mm) centers. Cast aluminum Base is (maximum) 2 3/8" (54mm) long (fore & aft) x 2" (51mm) wide x (maximum) 1 3/8" high with black anodized finish. Also used on Steering Pedestal Bases. As used on Beneteau, and others.

 



~ Back to Stanchion Bases Main Page ~

~ Back to Hardware Main Page ~

~ Home ~